搜索

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

周期性多层膜合金化制取的TiNi形状记忆薄膜的室温微结构特征

魏向军 徐 清 王天民 贾全杰 王焕华 冯松林

引用本文:
Citation:

周期性多层膜合金化制取的TiNi形状记忆薄膜的室温微结构特征

魏向军, 徐 清, 王天民, 贾全杰, 王焕华, 冯松林

Microstructure of TiNi shape memory alloy films made of sputter-deposited Ni/Ti multilayers

Wei Xiang-Jun, Xu Qing, Wang Tian-Min, Jia Quan-Jie, Wang Huan-Hua, Feng Song-Lin
PDF
导出引用
  • 用掠入射X射线衍射及X射线反射对磁控溅射制取的等原子比Ni/Ti周期性多层膜晶化热处理 后的TiNi形状记忆薄膜室温微结构进行了研究.TiNi形状记忆薄膜在深度方向的相分布和元 素分布是不均匀的,都是一种多层结构.室温下其微结构特征为最外层是Ti氧化膜,再下层 是Ti3Ni4,B19’马氏体相和少量的B2奥氏体相的三相混合物,靠近 基体为主要相成分马氏体,最后是Ni和Si界面反应层.X射线反射率的拟和结果显示薄膜微结 构的分析是合理的.薄膜中相深度分布的不均匀性主要是动力学因素决定的.
    Phase depth profile in TiNi shape memory alloy films is studied by the combinati on of grazing-incidence X-ray diffraction and X-ray reflectivity measurement. Th e film is made from sputter-deposited Ni/Ti multilayers. At room temperature, bo th the phase depth profile and element depth profile are not uniform, and both h ave multilayer structure. There is a three-phase mixture region consisting of Ti 3Ni4 precipitates, martensite and a little of austenite ne ar the free surface. A uniform martensite phase is formed near the substrate. Di ffusion and reaction take place between film and substrate. The simulation resul t of X-ray reflectivity shows that the results of film microstructure analysis a re reasonable. It is the kinetic factors that mainly cause the ununiformity of p hase depth profile in the film.
    • 基金项目: 高能所科技创新项目(批准号:U-513-1)资助的课题.
计量
  • 文章访问数:  7123
  • PDF下载量:  1254
  • 被引次数: 0
出版历程
  • 收稿日期:  2005-08-12
  • 修回日期:  2005-09-20
  • 刊出日期:  2006-03-20

/

返回文章
返回