搜索

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

液晶表面锚定能的温度依赖性研究

孙睿鹏 黄锡珉 邵喜斌 马凯 荆海

引用本文:
Citation:

液晶表面锚定能的温度依赖性研究

孙睿鹏, 黄锡珉, 邵喜斌, 马凯, 荆海

INVESTIGATION OF THE TEMPERATURE DEPENDENCE OF SURFACE ANCHORING ENERGY FOR LIQUID CRYSTALS

SUN RUI-PENG, HUANG XI-MIN, SHAO XI-BIN, MA KAI, JING HAI
PDF
导出引用
  • 通过测量扭曲液晶盒中的液晶分子的实际扭曲角及摩擦方向与液晶分子的界面指向矢之间的方位偏角,用自行建立的液晶方位表面锚定能的测量方法,测定了5CB液晶与摩擦的聚酰亚胺界面的锚定能及其温度依赖性,并用热力学理论进行了分析.实验结果表明,随着温度的增加液晶的表面锚定能Ea是减小的,从25.5℃时的5.0×10-5J/m2减小到35℃时的5.0×10-6J/m2;同时,外推长度de随
    The surface anchoring of nematic liquid crystals is an important coefficient which expresses the effect of liquid crystal alignment and the mechanism of the surface alignment. The surface azimuthal anchoring energy can be obtained by measuring the twist angle in the twist cell and the surface torsional angle between the rubbing direction and the liquid crystal director at the substrate boundary. The temperature dependence of the surface anchoring energy at 5CB-polyimide (PI) interface was studied. The surface anchoring energy decreases with increase of the temperature from 5.0×10-5J/m2 at 25.5℃ to 5.0×10-6J/m2 at 35.0℃. Meanwhile, the extrapolation length de increases from 80nm at 25.5℃ to 370nm at 0.5℃ below Tc. This result clearly signifies the important role of the ordered structure of the nematic interface in determining the temperature dependence of the anchoring strength at the 5CB-PI interface.
计量
  • 文章访问数:  6787
  • PDF下载量:  940
  • 被引次数: 0
出版历程
  • 收稿日期:  1995-10-30
  • 修回日期:  1995-12-12
  • 刊出日期:  1996-06-05

/

返回文章
返回