Search

Article

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

Multi-scale analysis of nanoscale contact process between spherical indenter and single crystal aluminium

Yang Xiao-Jing Fang Cong-Cong

Citation:

Multi-scale analysis of nanoscale contact process between spherical indenter and single crystal aluminium

Yang Xiao-Jing, Fang Cong-Cong
PDF
Get Citation

(PLEASE TRANSLATE TO ENGLISH

BY GOOGLE TRANSLATE IF NEEDED.)

  • Based on the quasicontinuum method and repulsive force-field approach, a muti-scale modeling of nano-contact process between rigid spherical indenter and surface of single crystal aluminium is established. The corresponding load-depth, graph of atomic state, and moire pattern of displacement are obtained, from which the arrangement of atoms and the effects of the shape of indenter on the nucleation and emission of dislocations in the contact process are studied. Therefore micro-mechanisms of deformation are analyzed. The result shows that due to the fact that the direction of force on atoms that contact the indenter is constantly changing with the increase of contact depth, the corresponding load-depth shows that step increases which is different from that of the square indenter with the response of the underlying crystal. Due to the indenter geometry, the close packed planes under both sides of indenter slip partially lead to Shockley partial dislocations. In the process of disengagement, the elastic recovery is accomplished as the atoms move up with indenter. The residual depth is 0.3 nm, which is close to the magnitude of the Burgers vector, 0.285 nm.
    • Funds: Project supported by the National Science Fund for the National Natural Science Foundation of China (Grant No. 11062003).
    [1]

    Zhou Z R, Lei Y Z, Zhang C W 2006 Frontier Development of Tribology (Beijing: Science Press) p4 (in Chinese) [周仲荣, 雷源忠, 张嗣伟 2006 摩擦学发展前沿 (北京: 科学出版社) 第4页]

    [2]

    Leng Y S, Hu Y Z, Zheng L Q 1999 J. Tribol.-T. ASME 121 128

    [3]

    Xiao X D, Qian L M 2000 Langmuir 16 8153

    [4]

    Liu W K, Karpov E G, Zhan G S, Park H S 2004 Comput. Method Appl. M. 193 1529

    [5]

    Karpov E G, Yu H, Park H S, Kam L W, Jane W Q, Qian D 2006 Int. J. Solids Struct. 43 6359

    [6]

    Shillkrot L E, Miller R E, Curtin W A 2002 J. Mech. Phys. Solids 50 2085

    [7]

    Luan B Q, Hyun S, Molinari J F, Bernstein N, Robbins M O 2006 Phys. Rev. E 74 046710

    [8]

    Liu W K, Park H S 2006 Handbook of Theorectical and Computational Nanotechnology (Stevenson Ranch: American Scientific Publishers)

    [9]

    Liu W K, Park H S, Qian D, Eduard G, Kadowaki H, Wagner G J 2006 Comput. Method Appl. M. 195 1407

    [10]

    Miller R E, Tadmor E B 2002 J. Computer-Aided Mater. Des. 9 203

    [11]

    Tadmor E B, Miller R E 2005 Handbook of Materials Modeling (Dordrecht: Kluwer Academic Publishers)

    [12]

    Sauer R A, Li S 2007 Finite Elem. Anal. Des. 43 384

    [13]

    Sauer R A, Li S 2007 Int. J. Numer. Meth. Eng. 71 931

    [14]

    Li J W, Ni Y S, Lin Y H 2009 Acta Metall. Sin. 45 129 (in Chinese) [黎军顽, 倪玉山, 林逸汉 2009 金属学报 45 129]

    [15]

    Qin Z D, Wang H T, Ni Y S 2007 Chin. Quart. Mech. 28 46 (in Chinese) [秦昭栋, 王华滔, 倪玉山 2007 力学季刊 28 46]

    [16]

    Wang H T, Qin Z D, Ni Y S, Zhang W 2009 Acta Phys. Sin. 58 1057 (in Chinese) [王华滔, 秦昭栋, 倪玉山, 张文 2009 物理学报 58 1057]

    [17]

    Miller R E, Rodney D 2008 J. Mech. Phys. Solids 56 1203

    [18]

    Mei J F, Li J W, Ni Y S, Wang H T 2010 Nanoscale Res. Lett. 5 692

    [19]

    Tadmor E B, Ortiz M, Philips R 1996 Philos. Mag. A 73 1529

    [20]

    Tadmor E B, 1996 Ph. D. Dissertation (Providence: Brown University)

    [21]

    Tadmor E B, Miller R E, Philips R, Ortiz M 1999 Mater. Res. 14 2233

    [22]

    Tadmor E B, Miller R E 2011 Modeling Materials Continuum, Atomistic and Multiscale Techniques (London: Cambridge University Press) p610

    [23]

    Shenoy V B, Miller R E, Tadmor E B, Rodney D, Phillips R, Ortiz M 1999 Mech. Phys. Solids 47 611

    [24]

    Erolessi F, Adams J B 1994 Europhys. Lett. 28 583

    [25]

    Li J W 2010 Ph. D. Dissertation (Shanghai: Fuda University) [黎军顽 2010 博士学位论文 (上海: 复旦大学)]

    [26]

    Kelchner Cynthia L, Plimpton S J, Hamilton J C 1998 Phys. Rev. B 58 11085

    [27]

    Michalske T A, Houston J E 1998 Acta Mater. 46 391

    [28]

    Huo D H, Liang Y C, Chen K 2003 China Mech. Engineer. 14 43 (in Chinese) [霍德鸿, 梁迎春, 程 凯 2003 中国机械工程 14 43]

    [29]

    Yang X J, Zhan S P 2012 Trans. Chin. Soc. Agricult. Machinery 43 250 (in Chinese) [杨晓京, 詹胜鹏 2012 农业机械学报 43 250]

    [30]

    Ian C, Jane S 2012 Introduction to Programming with Fortran (London: Springer Press) p21

    [31]

    Jiang W G, Li J W, Su J J, Tang J L 2007 Acta Mech. Solida Sin. 28 375 (in Chinese) [江五贵, 黎军顽, 苏建君, 汤井伦 2007 固体力学学报 28 375]

    [32]

    Landman U, Luedtke W D, Burnham N A, Colton R J 1990 Science 248 454

    [33]

    Gouldstone A, Koh H J, Zeng K Y, Giannakopoulos A E, Suresh S 2000 Acta Mater. 48 2277

    [34]

    Shi L Q, Sun T, Yan Y D, Dong S 2006 Nanotechnol. Precision Engineer. 4 146

    [35]

    Hu G X, Cai X 2000 Fundamentals of Materials Science (Shanghai: Shanghai Jiaotong University Press) p102 (in Chinese) [胡赓祥, 蔡珣 2000 材料科学基础 (上海: 上海交通大学出版社) 第102页]

    [36]

    Vugrin Kay E 2003 M. S. Dissertation (Blacksburg: Virginia Polytechnic Institute and State University)

    [37]

    Rubio G, Agraï N, Vieira S 1995 Phys. Rev. Lett. 76 2302

  • [1]

    Zhou Z R, Lei Y Z, Zhang C W 2006 Frontier Development of Tribology (Beijing: Science Press) p4 (in Chinese) [周仲荣, 雷源忠, 张嗣伟 2006 摩擦学发展前沿 (北京: 科学出版社) 第4页]

    [2]

    Leng Y S, Hu Y Z, Zheng L Q 1999 J. Tribol.-T. ASME 121 128

    [3]

    Xiao X D, Qian L M 2000 Langmuir 16 8153

    [4]

    Liu W K, Karpov E G, Zhan G S, Park H S 2004 Comput. Method Appl. M. 193 1529

    [5]

    Karpov E G, Yu H, Park H S, Kam L W, Jane W Q, Qian D 2006 Int. J. Solids Struct. 43 6359

    [6]

    Shillkrot L E, Miller R E, Curtin W A 2002 J. Mech. Phys. Solids 50 2085

    [7]

    Luan B Q, Hyun S, Molinari J F, Bernstein N, Robbins M O 2006 Phys. Rev. E 74 046710

    [8]

    Liu W K, Park H S 2006 Handbook of Theorectical and Computational Nanotechnology (Stevenson Ranch: American Scientific Publishers)

    [9]

    Liu W K, Park H S, Qian D, Eduard G, Kadowaki H, Wagner G J 2006 Comput. Method Appl. M. 195 1407

    [10]

    Miller R E, Tadmor E B 2002 J. Computer-Aided Mater. Des. 9 203

    [11]

    Tadmor E B, Miller R E 2005 Handbook of Materials Modeling (Dordrecht: Kluwer Academic Publishers)

    [12]

    Sauer R A, Li S 2007 Finite Elem. Anal. Des. 43 384

    [13]

    Sauer R A, Li S 2007 Int. J. Numer. Meth. Eng. 71 931

    [14]

    Li J W, Ni Y S, Lin Y H 2009 Acta Metall. Sin. 45 129 (in Chinese) [黎军顽, 倪玉山, 林逸汉 2009 金属学报 45 129]

    [15]

    Qin Z D, Wang H T, Ni Y S 2007 Chin. Quart. Mech. 28 46 (in Chinese) [秦昭栋, 王华滔, 倪玉山 2007 力学季刊 28 46]

    [16]

    Wang H T, Qin Z D, Ni Y S, Zhang W 2009 Acta Phys. Sin. 58 1057 (in Chinese) [王华滔, 秦昭栋, 倪玉山, 张文 2009 物理学报 58 1057]

    [17]

    Miller R E, Rodney D 2008 J. Mech. Phys. Solids 56 1203

    [18]

    Mei J F, Li J W, Ni Y S, Wang H T 2010 Nanoscale Res. Lett. 5 692

    [19]

    Tadmor E B, Ortiz M, Philips R 1996 Philos. Mag. A 73 1529

    [20]

    Tadmor E B, 1996 Ph. D. Dissertation (Providence: Brown University)

    [21]

    Tadmor E B, Miller R E, Philips R, Ortiz M 1999 Mater. Res. 14 2233

    [22]

    Tadmor E B, Miller R E 2011 Modeling Materials Continuum, Atomistic and Multiscale Techniques (London: Cambridge University Press) p610

    [23]

    Shenoy V B, Miller R E, Tadmor E B, Rodney D, Phillips R, Ortiz M 1999 Mech. Phys. Solids 47 611

    [24]

    Erolessi F, Adams J B 1994 Europhys. Lett. 28 583

    [25]

    Li J W 2010 Ph. D. Dissertation (Shanghai: Fuda University) [黎军顽 2010 博士学位论文 (上海: 复旦大学)]

    [26]

    Kelchner Cynthia L, Plimpton S J, Hamilton J C 1998 Phys. Rev. B 58 11085

    [27]

    Michalske T A, Houston J E 1998 Acta Mater. 46 391

    [28]

    Huo D H, Liang Y C, Chen K 2003 China Mech. Engineer. 14 43 (in Chinese) [霍德鸿, 梁迎春, 程 凯 2003 中国机械工程 14 43]

    [29]

    Yang X J, Zhan S P 2012 Trans. Chin. Soc. Agricult. Machinery 43 250 (in Chinese) [杨晓京, 詹胜鹏 2012 农业机械学报 43 250]

    [30]

    Ian C, Jane S 2012 Introduction to Programming with Fortran (London: Springer Press) p21

    [31]

    Jiang W G, Li J W, Su J J, Tang J L 2007 Acta Mech. Solida Sin. 28 375 (in Chinese) [江五贵, 黎军顽, 苏建君, 汤井伦 2007 固体力学学报 28 375]

    [32]

    Landman U, Luedtke W D, Burnham N A, Colton R J 1990 Science 248 454

    [33]

    Gouldstone A, Koh H J, Zeng K Y, Giannakopoulos A E, Suresh S 2000 Acta Mater. 48 2277

    [34]

    Shi L Q, Sun T, Yan Y D, Dong S 2006 Nanotechnol. Precision Engineer. 4 146

    [35]

    Hu G X, Cai X 2000 Fundamentals of Materials Science (Shanghai: Shanghai Jiaotong University Press) p102 (in Chinese) [胡赓祥, 蔡珣 2000 材料科学基础 (上海: 上海交通大学出版社) 第102页]

    [36]

    Vugrin Kay E 2003 M. S. Dissertation (Blacksburg: Virginia Polytechnic Institute and State University)

    [37]

    Rubio G, Agraï N, Vieira S 1995 Phys. Rev. Lett. 76 2302

  • [1] Dong Ye, Zhu Te, Song Ya-Min, Ye Feng-Jiao, Zhang Peng, Yang Qi-Gui, Liu Fu-Yan, Chen Yu, Cao Xing-Zhong. Effect of dislocation on helium irradiation defects in low-activation martensitic steel. Acta Physica Sinica, 2023, 72(18): 187801. doi: 10.7498/aps.72.20230694
    [2] Zhang Bo-Jia, An Min-Rong, Hu Teng, Han La. Molecular dynamics simulation of mechanism of interaction between dislocation and amorphism in magnesium. Acta Physica Sinica, 2022, 71(14): 143101. doi: 10.7498/aps.71.20212318
    [3] Qi Ke-Wu, Zhao Yu-Hong, Tian Xiao-Lin, Peng Dun-Wei, Sun Yuan-Yang, Hou Hua. Phase field crystal simulation of effect of misorientation angle on low-angle asymmetric tilt grain boundary dislocation motion. Acta Physica Sinica, 2020, 69(14): 140504. doi: 10.7498/aps.69.20200133
    [4] Qi Ke-Wu, Zhao Yu-Hong, Guo Hui-Jun, Tian Xiao-Lin, Hou Hua. Phase field crystal simulation of the effect of temperature on low-angle symmetric tilt grain boundary dislocation motion. Acta Physica Sinica, 2019, 68(17): 170504. doi: 10.7498/aps.68.20190051
    [5] Liu Si-Mian, Han Wei-Zhong. Mechanism of interaction between interface and radiation defects in metal. Acta Physica Sinica, 2019, 68(13): 137901. doi: 10.7498/aps.68.20190128
    [6] Gao Ying-Jun, Qin He-Lin, Zhou Wen-Quan, Deng Qian-Qian, Luo Zhi-Rong, Huang Chuang-Gao. Phase field crystal simulation of grain boundary annihilation under strain strain at high temperature. Acta Physica Sinica, 2015, 64(10): 106105. doi: 10.7498/aps.64.106105
    [7] Shao Yu-Fei, Yang Xin, Li Jiu-Hui, Zhao Xing. Atomistic simulation study on the local strain fields around an extended edge dislocation in copper. Acta Physica Sinica, 2014, 63(7): 076103. doi: 10.7498/aps.63.076103
    [8] Chen Li-Qun, Yu Tao, Peng Xiao-Fang, Liu Jian. The site preference of refractory element W in NiAl dislocation core and its effects on bond characters. Acta Physica Sinica, 2013, 62(11): 117101. doi: 10.7498/aps.62.117101
    [9] Li Lian-He, Liu Guan-Ting. A screw dislocation interacting with a wedge-shaped crack in one-dimensional hexagonal quasicrystals. Acta Physica Sinica, 2012, 61(8): 086103. doi: 10.7498/aps.61.086103
    [10] Lu Huai-Bao, Li Jun-Wan, Ni Yu-Shan, Mei Ji-Fa, Wang Hong-Sheng. Multiscale analysis of defect initiation on the atomistic crack tip in body-centered-cubic metal Ta. Acta Physica Sinica, 2011, 60(10): 106101. doi: 10.7498/aps.60.106101
    [11] Zhou Chun-Lan, Li Xu-Dong, Wang Wen-Jing, Zhao Lei, Li Hai-Ling, Diao Hong-Wei, Cao Xiao-Ning. The effect of oxidation randomly textured up-pyramid on the silicon solar cell. Acta Physica Sinica, 2011, 60(3): 038201. doi: 10.7498/aps.60.038201
    [12] Fang Bu-Qing, Lu Guo, Zhang Guang-Cai, Xu Ai-Guo, Li Ying-Jun. Evolution of stacking-fault-tetrahedron-like structures in copper crystal. Acta Physica Sinica, 2009, 58(7): 4862-4871. doi: 10.7498/aps.58.4862
    [13] Zhang Zeng, Zhang Rong, Xie Zi-Li, Liu Bin, Xiu Xiang-Qian, Li Yi, Fu De-Yi, Lu Hai, Chen Peng, Han Ping, Zheng You-Dou, Tang Chen-Guang, Chen Yong-Hai, Wang Zhan-Guo. Thickness dependent dislocation, electrical and optical properties in InN films grown by MOCVD. Acta Physica Sinica, 2009, 58(5): 3416-3420. doi: 10.7498/aps.58.3416
    [14] Xu Zhen-Hai, Yuan Lin, Shan De-Bin, Guo Bin. Atomistic simulation of yield mechanism of single crystal copper nanowires. Acta Physica Sinica, 2009, 58(7): 4835-4839. doi: 10.7498/aps.58.4835
    [15] Zhang Xiao-Bo, Zhang Wei, Shu Fang-Jie, Li Yong-Ping. Experimental investigation of interaction of two Laguerre-Gaussian modes carrying opposite topological charges. Acta Physica Sinica, 2007, 56(1): 213-217. doi: 10.7498/aps.56.213
    [16] Jiang Hui-Feng, Zhang Qing-Chuan, Chen Xue-Dong, Fan Zhi-Chao, Chen Zhong-Jia, Wu Xiao-Ping. Numerical simulation of the dynamic interactions between dislocation and solute atoms. Acta Physica Sinica, 2007, 56(6): 3388-3392. doi: 10.7498/aps.56.3388
    [17] Sun Wei, Wang Qing-Zhou, Han Fu-Sheng. The internal friction related to dislocation peak in a graphite particulate CuAlMn shape memory alloy composite. Acta Physica Sinica, 2007, 56(2): 1020-1026. doi: 10.7498/aps.56.1020
    [18] Deng Xiao-Liang, Zhu Wen-Jun, He Hong-Liang, Wu Deng-Xue, Jing Fu-Qian. Initial dynamic behavior of nano-void growth in single-crystal copper under shock loading along 〈111〉 direction. Acta Physica Sinica, 2006, 55(9): 4767-4773. doi: 10.7498/aps.55.4767
    [19] Zhang Guo-Ying, Liu Chun-Ming, Zhang Hui. Electronic theory for the refinement mechanism of ultrafine steel. Acta Physica Sinica, 2005, 54(2): 875-879. doi: 10.7498/aps.54.875
    [20] Luo Shi-Yu, Shao Ming-Zhu, Wei Luo-Xia, Liu Zeng-Rong. Dynamics of dislocation and global bifurcation for a system. Acta Physica Sinica, 2004, 53(6): 1940-1945. doi: 10.7498/aps.53.1940
Metrics
  • Abstract views:  5135
  • PDF Downloads:  496
  • Cited By: 0
Publishing process
  • Received Date:  13 May 2013
  • Accepted Date:  05 June 2013
  • Published Online:  05 September 2013

/

返回文章
返回