Acta Physica Sinica
Citation Search Quick Search

ISSN 1000-3290
CN 11-1958/O4
Semimonthly
About
   » About APS
   » Editorial Board
   » SCI IF
   » Staff
   » Contact
Browse APS
   » Accepts
   » In Press
   » Current Issue
   » Past Issues
   » View by Fields
   » Top Downloaded
   » Sci Top Cited
Authors
   » Submit an Article
   » Manuscript Tracking
   » Call for Papers
   » Scope
   » Instruction for Authors
   » Copyright Agreement
   » Templates
   » Author FAQs
   » PACS
Referees
   » Review Policy
   » Referee Login
   » Referee FAQs
   » Editor in Chief Login
   » Office Login
Links
   »
HighLights More»   
Computer simulation of the string relaxation modes of the molecule-string model for glass transition
Zhao Xing-Yu, Wang Li-Na, Fan Xiao-Hui, Zhang Li-Li, Wei Lai, Zhang Jin-Lu, Huang Yi-Neng
Acta Physica Sinica, 2011, 60 (3): 036403
Stability and magnetism of fcc single-crystal nickel nanowires by first principles calculations
Cheng Zhi-Da, Zhu Jing, Sun Tie-Yu
Acta Physica Sinica, 2011, 60 (3): 037504
Emergence of local structures in complex network:common neighborhood drives the network evolution
Cui Ai-Xiang, Fu Yan, Shang Ming-Sheng, Chen Duan-Bing, Zhou Tao
Acta Physica Sinica, 2011, 60 (3): 038901
Acta Physica Sinica  
  Acta Physica Sinica--2011, 60 (3)   Published: 15 March 2011
Select | Export to EndNote
REVIEW OF FRONTIER AREA

Comprehensive Survey for the Frontier Disciplines Progress of negative electron affinity GaN photocathode

Fu Xiao-Qian, Chang Ben-Kang, Li Biao, Wang Xiao-Hui, Qiao Jian-Liang
Acta Physica Sinica. 2011, 60 (3): 038503 doi: 10.7498/aps.60.038503
Full Text: [PDF 1204 KB] Download:(919)
Show Abstract
GaN is becoming a promising material in ultraviolet detection and vacuum electronic source field for its good performance. High quantum efficiencies of greater than 70% and 30% have been achieved for the opaque mode and transparent mode GaN photocathode, respectively. This paper reviews the progress of GaN photocahtode in three important fields,including structure design, surface cleaning and Cs/O activation, analyzes the key factors influencing the quantum efficiency, and evaluates the prospect for its development.
ELECTROMAGENTISM, OPTICS, ACOUSTICS, HEAT TRANSFER, CLASSICAL MECHANICS, AND FLUID DYNAMICS

Study on double incidence left-handed material composed of double Z-shaped metal strips

Wang Hai-Xia, Lü Ying-Hua, Zhang Hong-Xin, Wu Yan-Ling
Acta Physica Sinica. 2011, 60 (3): 034101 doi: 10.7498/aps.60.034101
Full Text: [PDF 1360 KB] Download:(995)
Show Abstract
A new 2D left-handed material structural unit is proposed by setting two reversely symmetrical Z metal strips on each side of the dielectric substrate respectively. The structure can present left-handed properties in X waveband, with electromagnetic waves incident either perpendicularly or parallel to the plane of the substrate. By means of numerical simulation, extracting the effective permittivity and permeability from S parameters and building the equivalent magnetic resonance circuits of the structure, the left-handed property is further analyzed and verified. And by comparing the double Z-shape unit with the traditional H-shape unit, it is shown that they have similar responses of presenting left-handed pass band when electromagnetic waves are incident perpendicularly to the substrate, but only the double Z-shape unit can achieve left-handed features when electromagnetic waves are incident parallel to the substrate. The results indicate that the double Z-shape left-handed structural unit is superior to the traditional H-shape structure, namely, the double Z-shape can redound to design left-handed structural unit for double dimension incidence of electromagnetic waves.

Investigation on the reconstruction of roughsurface with hybrid method

Liang Yu, Guo Li-Xin, Wang Rui
Acta Physica Sinica. 2011, 60 (3): 034102 doi: 10.7498/aps.60.034102
Full Text: [PDF 1414 KB] Download:(918)
Show Abstract
Based on the Desantos spectral formalism, using the hybrid method that combines the numerical and approximate algorithms, the reconstruction problem for the one-dimensional rough surface is investigated. For the direct problem, the scattering data is obtained by the numerical algorithm—the method of moments (MOM). For the inverse problem, the profile of rough surface with different roughness is reconstructed by two approximate algorithms—the small perturbation approximation (SPA) and the Kirchhoff approximation (KA) combined with the method of moments. Taking the Gaussian rough surface for example, the numerical results of reconstructed rough surface with different roughness are presented for the hybrid method, and the data are compared and analyzed.

Determination of the optical constants of the magnetron sputtered aluminum oxide films from the transmission spectra

Liao Guo-Jin, Luo Hong, Yan Shao-Feng, Dai Xiao-Chun, Chen Ming
Acta Physica Sinica. 2011, 60 (3): 034201 doi: 10.7498/aps.60.034201
Full Text: [PDF 1201 KB] Download:(1009)
Show Abstract

By combining Swanepoel's theory and the Wemple-DiDomenico dispersion model, a simple method was established to determine the optical contants of the magnetron sputtered aluminum oxide films directly from the corresponding transmission spectra. The results showed that the magnetron sputtered aluminum oxide films exhibit the optical characteristics of high refractive index of 1.566—1.76 (at 550 nm), negligible absorption in spectral region of 400—1100 nm, as well as the direct band gap of about 3.91—4.2 eV. And the specific values of the optical constants strongly depend on the annealing temperature , which is one of the important technological parameters for the magnetron sputtered aluminum oxide films. Moreover, in the weak and medium absorption spectral regions, the calculated values of refractive indices are in satisfactory agreement with the results derived from the high-resolution Tek3000 film-characterization system, indicating the reliability and feasibility of the method in determining the optical constants of Al2O3films.

Research on the algorithm of three-dimensional information encryption based on the phase extraction

Shi Yi-Shi, Wang Ya-Li, Xiao Jun, Xiao Jun, Yang Yu-Hua
Acta Physica Sinica. 2011, 60 (3): 034202 doi: 10.7498/aps.60.034202
Full Text: [PDF 1752 KB] Download:(835)
Show Abstract
The algorithm for three-dimensional information encryption based on the phase extraction is proposed. The three-dimensional information with the pure amplitude and pure phase are constructed as the encryption target. First, the complex amplitude of the three-dimensional information is calculated under the scalar diffraction theory. Then its phase distribution is extracted independently and it is encrypted with the double random phase encoding. The decryption algorithm is just the inverse process as the above. Computer simulations demonstrate the feasibility, the robustness and the security of the algorithm. Further, it is revealed the potential of applying the algorithm for the three-dimensional information encryption with much larger information quantity.

Sequence images hiding technique of three-dimensional object based on principal component analysis in wavelet domain

Shuai Wen-Juan, Feng Shao-Tong, Nie Shou-Ping, Zhu Zhu-Qing
Acta Physica Sinica. 2011, 60 (3): 034203 doi: 10.7498/aps.60.034203
Full Text: [PDF 2293 KB] Download:(923)
Show Abstract
In order to hide sequence images of 3D object in a carrying image, eigenimages are obtained by using principal component analysis method. Wavelet coefficients of eigenimages are embedded into the wavelet domain of the carrying image. Based on the relationship of extracted eigenimages and coefficients, a series of images are reconstructed. The proposed method does not store the object images directly, but store the eigenimages which contain information of the 3D object. The experimental results show that the features of 3D object are effectively embedded into the carrying image, and the proposed algorithm has a high capacity.

The study of color digital holography free from the zero-order diffraction interruption

Li Jun-Chang, Fan Ze-Bin, Tankam Patrice, Song Qing-He, Picart Pascal
Acta Physica Sinica. 2011, 60 (3): 034204 doi: 10.7498/aps.60.034204
Full Text: [PDF 1786 KB] Download:(815)
Show Abstract
In the study of color digital holography, using the spherical wave as the reconstruction wave, the wave-front reconstruction with the angular spectrum diffraction formula is an effective approach. However, this method is usually accompanied by intense zero-order diffraction interruption. In this paper, based on the theoretical analysis, an important modification of the wave-front reconstruction process has been made. The color digital holography experiment result demonstrated that the quality of reconstructed color image has been improved remarkably with this modified method.

The use of dynamic cavity environment to achieve controlling of the process of spontaneous emission of an atom

Huang Xian-Shan, Liu Hai-Lian
Acta Physica Sinica. 2011, 60 (3): 034205 doi: 10.7498/aps.60.034205
Full Text: [PDF 1330 KB] Download:(705)
Show Abstract
In the paper, we theoretically discuss the use of dynamic cavity environment to realize controlling of the evolution of spontaneous emission from an excited two-level atom. It is found that cyclical changes in cavity environment leads to the interaction betwcen the electromagnetic modes, resulting in the redistribution of the electromagnetic modes density; both the frequency of energy exchange and the energy dissipation rate between atom and environment are affected. When the frequency of environment change is relatively accordant with the process of energy exchange between the atom and environment, the decay rate is obviously inhibited and a stable coherence evolution can be obtained. Thus the evolution of coherent states can be modulated by using dynamic environment changes.

Micro-nano-optical machine system tunable wavelength vertical cavity surface emitting lasers with wide tunable range

Guan Bao-Lu, Zhang Jing-Lan, Ren Xiu-Juan, Guo Shuai, Li Shuo, Chuai Dong-Xu, Guo Xia, Shen Guang-Di
Acta Physica Sinica. 2011, 60 (3): 034206 doi: 10.7498/aps.60.034206
Full Text: [PDF 1320 KB] Download:(735)
Show Abstract
The stucture of tunable vertical cavity surface emitting laser is obtained based on the micro-nano-mechanical technology. The DBR reflector with Al0.8Ga0.2As sacrificial layer consisted the micro-nano reflector systerm, which combines with the multi-well active region coupled structure. In addition, the structure of micro-nano-optical machine system is not only the DBR reflector, but also serves to tune the wavelength of lasing by the electrostatic force. Good laser characteristics are obtained with continuous tuning ranges over 18.8 nm near 968.8 to 950 nm for 0—7 V tuning bias.

Superresolution in adaptive optics confocal scanning laser ophthalmoscope

Lu Jing, Li Hao, He Yi, Shi Guo-Hua, Zhang Yu-Dong
Acta Physica Sinica. 2011, 60 (3): 034207 doi: 10.7498/aps.60.034207
Full Text: [PDF 2671 KB] Download:(1048)
Show Abstract
The resolution of adaptive optics confocal scanning laser ophthalmoscope is constrained by human eye’s aberration, numberical aperture and pinhole size. A super resolved adaptive optics confocal scanning laser ophthalmoscope is presented. By using adaptive optics to detect and compensate human eye’s aberration, and using optical superresolution to improve resolution which is degraded by large pinhole size, the system can achieve high resolution, real-time human retina image in vivo .

Optimization of medium and control characteristics of stimulated Brillouin scattering based on mixed media

Hasi Wu-Li-Ji, Li Xing, Guo Xiang-Yu, Lu Huan-Huan, Lü Zhi-Wei, Lin Dian-Yang, He Wei-Ming, Fan Rui-Qing
Acta Physica Sinica. 2011, 60 (3): 034208 doi: 10.7498/aps.60.034208
Full Text: [PDF 1178 KB] Download:(773)
Show Abstract
In this paper, the optimization of medium and control characteristics of stimulated Brillouin scattering (SBS) based on mixed media is investigated. The excellent intersolubility of perfluorocarbon liquid media is analyzed and the dependence of gain coefficient, phonon lifetime and Brillouin frequency shift of HT-230/FC-72 mixed media on mixing-ratio is numerically simulated. In Countinuum’s Nd: YAG seed-injected laser system, we measured absorption coefficient, optical breakdown threshold, energy reflectivity and Stokes pulses waveform of HT-230/FC-72 mixture under different mixing-ratio. The results indicate that the mixed media not only can optimize the medium, but also can control the characteristics of SBS within a certain range.

The two-photon absorption saturation process in an Au nanoparticle array

Wang Kai, Long Hua, Fu Ming, Zhang Li-Chao, Yang Guang, Lu Pei-Xiang
Acta Physica Sinica. 2011, 60 (3): 034209 doi: 10.7498/aps.60.034209
Full Text: [PDF 1252 KB] Download:(866)
Show Abstract
The triangular Au nanoparticle array of size 37 nm was fabricated on a quartz substrate using nanosphere lithography. By performing the Z-scan method with femtosecond laser (800 nm, 50 fs), the optical nonlinearity of the Au nanoparticle array was determined. The results showed an intensity-related two-photon absorption saturation processes. As the excitation intensity increases, the nonlinear absorption changes from two-photon absorption to saturated absorption, while the nonlinear refraction exhibits self-defocusing effect. The one- and two-photon figures of merit, W=7.5 and T=0.12, were obtained, validating a high efficiency nonlinear material for all-optical switching.

Theoretical research on cascaded difference frequency generation of terahertz radiation

Zhong Kai, Yao Jian-Quan, Xu De-Gang, Zhang Hui-Yun, Wang Peng
Acta Physica Sinica. 2011, 60 (3): 034210 doi: 10.7498/aps.60.034210
Full Text: [PDF 1323 KB] Download:(1104)
Show Abstract
A novel mechanism of cascaded difference frequency generation (DFG) is advanced in this article to solve the problem of low-efficiency in terahertz (THz) DFG. The cascaded DFG process is theoretically analyzed using ZnTe crystal as an example. The optimal pumping condition and crystal length is obtained, and the effects of crystal absorption, wave number mis-match and pumping intensity are investigated by solving the coupling wave equations of cascaded DFG. It is obviously seen from the calculation results that the terahertz conversion efficiency can be greatly enhanced in cascaded DFG, in which the photon conversion efficiency can even break through the Manley-Rowe limit.

Three-dimensional short-range interactions of strongly nonlocal optical spatial solitons

Zhang Xia-Ping
Acta Physica Sinica. 2011, 60 (3): 034211 doi: 10.7498/aps.60.034211
Full Text: [PDF 1312 KB] Download:(835)
Show Abstract
Basing on the accurate Gaussian analytical solution of a pair of (1+2)D optical spatial solitons with symmetrical oblique incidence,we investigated the short-range interactions in the strongly nonlocal nonlinear media.Two solitons in close proximity can be intertraped via the strong nonlocality ,and propagate together in a stable spiral and the trajectory of mass center of solitons will deflect because of the phase difference and the ratio of the power of two solitons under the condition of momentum conservation. It is possible to find its application in planar all-optical interconnection in bulk media.We analyszed the evolution of the Poynting vector as they propagate through the strongly nonlocal media.

Separate spatial soliton pairs in biased series photorefractive polymer circuit

Ji Xuan-Mang, Jiang Qi-Chang, Liu Jin-Song
Acta Physica Sinica. 2011, 60 (3): 034212 doi: 10.7498/aps.60.034212
Full Text: [PDF 1365 KB] Download:(621)
Show Abstract
This paper presents calculations based on the idea of photorefractive polymer spatial solitons, namely, screening solitons being formed in a biased series photorefractive polymer circuit consisting of two photorefractive polymer connected electronically by electrode leads in a chain with a voltage source. A system of two coupled equations is derived under appropriate conditions for two-beam propagation in the series photorefractive polymer circuit. The existence of dark-dark, bright-dark and bright-bright photorefractive polymer soliton pairs in such a circuit is proved. In the limit in which the optical wave has a spatial extent much less than the width of the photorefractive polymer, the two solitons in dark-dark soliton pairs can affect each other’s spatial profiles and the dynamical evolution by the light-induced current. For a bright-dark soliton pair, the dark soliton can affect the other soliton by light-induced current, but the bright soliton cannot. The two solitons in bright-bright soliton pairs cannot affect each other.

Compound photonic crystals with cholesteric liquid crystals sandwiched isotropic defect layers

He Zheng-Hong, Ye Zhi-Cheng, Li Zheng-Guang, Cui Qing-Yu, Su Yi-Kai
Acta Physica Sinica. 2011, 60 (3): 034213 doi: 10.7498/aps.60.034213
Full Text: [PDF 1281 KB] Download:(634)
Show Abstract
Forbidden gaps of one-dimensional compound photonic crystals consisting of cholesteric liquid crystals sandwiched by periodic isotropic layers are investigated. The common forbidden gaps appear for both incident left and right polarization light which is different from the cholesteric liquid crystals. The forbidden gaps for incident left polarization light will disappear and the forbidden gaps for incident right polarization light will merge and become wider with the increasing of thickness ratio of cholesteric liquid crystals to periodic isotropic layers. The effect of forbidden gaps for incident left and right polarization light becomes obvious with the increasing of refractive index of periodic isotropic layers. The corresponding forbidden gaps for two colors of red, green and blue will appear by tuning thickness ratio of cholesteric liquid crystals to periodic isotropic layers and the refractive index of periodic isotropic layers, which can be used to fabricate reflective color filters for liquid display.

Heat transfer characteristics in fabrication of heat method in photonic crystal fiber grating

Qi Yue-Feng, Qiao Han-Ping, Bi Wei-Hong, Liu Yan-Yan
Acta Physica Sinica. 2011, 60 (3): 034214 doi: 10.7498/aps.60.034214
Full Text: [PDF 1422 KB] Download:(977)
Show Abstract
The grating fabrication technology with heat method in photonic crystal fiber based on its structural change is researched. The principle of photonic crystal fiber grating is analyzed theor etically. Heat transfer theory and finite element method are both used to analyze the thermal field distribution in the fiber, as well as the influence of air hole structure in the cladding, and the parameters of laser beam in the process of grating fabrication are discussed. The research results show that the grating can be formed by the periodic air hole collapse in the cladding of photonic crystal fiber. Under double-point heating, the energy will be uniformly distributed in the radial direction and approximated by the Gaussian distribution in the axial direction. The collapsed air holes in the cladding accelerate the process of forming grating. In the same size of luminous spot, as the layers and the radii of air holes increase, the laser power for collapsing fiber decreases. Moreover, the relationship between laser power and air filling rate is obtained by stimulating the grating fabrication process in photonic crystal fiber with 1 to 7 layers of air holes. This kind of photonic crystal fiber grating can improve the thermal and long-term stability of conventional grating, and so it will have great potential applications in the relevant fields of optical fiber sensors.

Numeric simulation of the diffraction pattern of zigzag grating

Zang Hua-Ping, Cao Lei-Feng, Wang Chuan-Ke, Jiang Gang, Wei Lai, Fan Wei, Zhou Wei-Min, Gu Yu-Qiu
Acta Physica Sinica. 2011, 60 (3): 034215 doi: 10.7498/aps.60.034215
Full Text: [PDF 1270 KB] Download:(1015)
Show Abstract
The zigzag grating is one of the newly proposed optical dispersive elements which has an excellent diffraction characteristics and has important applications in the spectrum measurement and analysis. The simulation results of the diffraction pattern of the zigzag grating for X ray are presented using a new numerical method based on the convolution theorem, and comparison of its diffraction pattern with those of the traditional grating and sinusoidal grating are studied. It is seen from the results that all higher order diffractions of the zigzag grating are suppressed below the level of four orders of magnitude compared with the first order diffraction, which is superior to the traditional grating, being consistent with the theoretical expectations. Moreover, the impact caused by the absorber is analyzed, which eventually confirms that the zigzag grating has perfect practical application feasibility. The conclusions provide a potential alternative for the physical design of the zigzag gating, which is expected to replace the traditional transmission grating in applications to the soft X-ray spectrum measurement.

Experimental calibration of transmission grating and theoretical calculation of diffraction efficiency

Shang Wan-Li, Zhu Tuo, Xiong Gang, Zhao Yang, Zhang Wen-Hai, Yi Rong-Qing, Kuang Long-Yu, Cao Lei-Feng, Gao Yu-Lin, Yang Jia-Min, Zhao Yi-Dong, Cui Ming-Qi, Zheng Lei, Han Yong, Zhou Ke-Jin, Ma Chen-Y
Acta Physica Sinica. 2011, 60 (3): 034216 doi: 10.7498/aps.60.034216
Full Text: [PDF 1230 KB] Download:(987)
Show Abstract
Transmission grating is widely used in measurement of soft X rays. In order to measure the diffraction efficiencies of the transmission grating which is used in laser fusion, the transmission grating was calibrated on Beijing Synchrotron Radiation Facility in the energy region from 200eV to 1600eV, and the experimental results have been obtained. The model for grating efficiency simulation has been developed and calculations using a new so called 7-side quasi-trapezoidal cross section model were carried out. The results from the new model are in good agreement with the experimental data. The exact grating wire cross section is described.

Analysis of coupling characteristics of midinfrared high polarization chalcogenide glass dual-core photonic crystal fiber

Liu Shuo, Li Shu-Guang, Fu Bo, Zhou Hong-Song, Feng Rong-Pu
Acta Physica Sinica. 2011, 60 (3): 034217 doi: 10.7498/aps.60.034217
Full Text: [PDF 1310 KB] Download:(975)
Show Abstract
A kind of chalcogenide glass midinfrared dual-core photonic crystal fiber has been proposed in this paper. The coupling characteristic of this fiber has been studied by multipole method using the basic theory of coupling. It is found that the birefringence of dual-core PCF with pitch 5.4 μm, air-hole radius 1.35 μm and air-filling fraction 0.5 is 0.551×10-2 at normalized frequency λ/Λ = 2.04 μm. At normalized frequency λ/Λ = 0.93 μm, coupling lengths are 145.32 μm and 154.68 μm for x-polarized mode and y-polarized mode, respectively. The band extended to midinfrared. This dual-core photonic crystal fiber with coupling length and high polarization is useful for manufacturing midinfrared band optical fiber coupler.

A new sub-aperture stitching method of measuring special optical element

Chang Jun, Zhang Zheng-Hui, Wang Rui-Rui
Acta Physica Sinica. 2011, 60 (3): 034218 doi: 10.7498/aps.60.034218
Full Text: [PDF 1339 KB] Download:(872)
Show Abstract
Novel conformal window can enhance the aerodynamic performance of aircraft obviously. Due to the surface complexity of these conformal windows, the measuring of conformal windows is infeasible by using the conventional optical measurement technique. In this paper, we describe a new sub-aperture stitching method for conformal measurement, and introduce the design of this technology. Based on the theory of compensation method, a compensator is designed for a 70mm aperture conformal window, of which the final residual wavefront error(RMS) is 0.0515λ(λ=632.8nm).

Transmission characteristics of elastic wave in 1D solid-solid cylindrical phononic crystal

Liu Qi-Neng
Acta Physica Sinica. 2011, 60 (3): 034301 doi: 10.7498/aps.60.034301
Full Text: [PDF 1294 KB] Download:(826)
Show Abstract
Transmission characteristics of elastic wave in solid-solid cylindrical phononic crystal are obtained under condition of restrictied transrerse elastic wave, and the characteristics of mode is studied. Transmission characteristics of elastic wave versus mode quantum number and cylinder radius are calculated by the transfer matrix method. The new characteristics of elastic wave in solid-solid cylindrical phononic crystal are obtained. Transmission characteristics of elastic wave are determined by the mode quantum number and cylinder radius.

Simulation of a metamaterial beam for mechanical wave absorption

Lin Guo-Chang, Sun Hong-Wei, Tan Hui-Feng, Du Xing-Wen
Acta Physica Sinica. 2011, 60 (3): 034302 doi: 10.7498/aps.60.034302
Full Text: [PDF 1258 KB] Download:(1034)
Show Abstract
In this paper, we present a metamaterial beam consisting of a uniform isotropic beam with many small mass-spring systems serving as mechanical wave absorbers. Based on the analysis of two different mass-spring systems, negative effective mass and negative effective stiffness are explained theoretically. The governing equations of a unit cell of a metamaterial beam are derived using the Hamilton’s principle. The mechanical wave absorbabilities of the following two different finite metamaterial beams are analyzed by numerical simulation:one is the bean in which mass-spring systems with linearly varying elastic coefficients are uniformly distributed, and the other is the bean in which four identical absorber subgroups composed of spring-damper subsystems with linearly varying natural frequenciesare uniformly distributed. The results reveal that the mechanical wave transmitted in the metamaterial beam is absorbed by resonating with spring-mass absorbers, which verifies the effectivity of the proposed metamaterial beam on mechanical wave absorption.

The application of symplectic geometric algorithm in a special Chaplygin system

Liu Shi-Xing, Liu Chang, Chang Peng, Wang Zhong-Wen, Guo Yong-Xin
Acta Physica Sinica. 2011, 60 (3): 034501 doi: 10.7498/aps.60.034501
Full Text: [PDF 1125 KB] Download:(640)
Show Abstract
A special Chaplygin system is studied numerically by using the symplectic geometric algorithm and compared with the classical R-K method. By comparing the results of the two methods, the advantage of symplectic geometric algorithm used on this special Chaplygin mechanical system is demonstrated.

Development of shear band in a granular material in biaxial tests

Bi Zhong-Wei, Sun Qi-Cheng, Liu Jian-Guo, Jin Feng, Zhang Chu-Han
Acta Physica Sinica. 2011, 60 (3): 034502 doi: 10.7498/aps.60.034502
Full Text: [PDF 1735 KB] Download:(1365)
Show Abstract
Granular matter is a large assemblage of dense packed particles. A granular skeleton frame is linked by grain-to-grain contacts. An external loading is usually transmitted through selective pathways from the skeleton frame, and heterogeneous force chain architecture is formed. The formation and evolution of shear band have importarit bearing to the stability of a granular assembly. In this work, the mechanical properties of granular matter under biaxial test are studied by using DEM simulations. Evolutions of stress, volumetric strain, coordination number, distribution of particle rotation and solid fractions are analyzed. The results show that within shear zone the solid fraction is smaller and the coordination number fluctuates violently, which indicates that they are unjammed, while beyond the shear band the particles are jammed. Therefore, we could say that the shear band actually corresponds to the complicated jamming transition. Three types of force chain configurations are observed under different axial strains: circle-shaped, column-shaped, both column and vortex-shaped. Such structures would be dominant to the mechanical properties of macro-mechanical properties and granular system, and pending further studies.

Centreline statistics of the small-scale turbulence of a circular jet and their dependence on high frequency noise

Xu Min-Yi, Du Cheng, Mi Jian-Chun
Acta Physica Sinica. 2011, 60 (3): 034701 doi: 10.7498/aps.60.034701
Full Text: [PDF 1380 KB] Download:(796)
Show Abstract
This study systematically investigates the statistics of the centreline small-scale turbulence of a circular jet issuing from a smooth contraction nozzle. Detailed velocity measurements were performed for the exit Reynolds number of Re=20100, where ReUjd /ν with Uj being the exit mean velocity, d the nozzle diameter and ν the kinematic viscosity. After effectively filtering out high frequency noises, statistical properties of the small-scale turbulence were obtained appropriately; those properties include turbulence energy dissipation rate, Kolmogorov length scale, Taylor scale, turbulence Reynolds number, skewness and flatness of the velocity derivative. It is observed that these properties satisfy their self-preserving relations in the far field. It is also revealed that the small-scale turbulence reaches the self-preserving state earlier than does the large-scale motion. Besides, the smallest-scale turbulence depends least on the initial and boundary conditions and therefore behaves most universally across different flows.
CONDENSED MATTER: STRUCTURAL, MECHANICAL, AND THERMAL PROPERTIES

The evolution of crystalline structure in the preparationof PAN-based carbon fibers studiedby whole powder pattern fitting

Zhang Cai-Hong, Sheng Yi, Tian Hong, Xu Yao, Lü Chun-Xiang, Wu Zhong-Hua
Acta Physica Sinica. 2011, 60 (3): 036101 doi: 10.7498/aps.60.036101
Full Text: [PDF 1641 KB] Download:(1034)
Show Abstract
Based on the Rietveld theory and Maud software, the evolution of crystalline structure of PAN-based carbon fibers was studied by investigating the different stages in the preparation of carbon fibers. The microstructure parameters of PAN fibers, oxidative fibers, and carbon fibers, including cell parameters, apparent crystal grain sizes, textural structure and micro-strain, were obtained from the named whole powder pattern fitting method for XRD result. Based on rigorus theory of crystallography, the whole powder pattern fitting treats the whole XRD powder diffraction pattern rather than individual diffraction peaks, resulting in higher credibility and precision. The results indicated that polymer chains were arranged along the axis of PAN fiber and the apparent crystallite size was about 6.4 nm. After pre-oxidation, the originally ordered structure in PAN fiber was damaged and new less-ordered cyclic ladder structure was formed in the pre-oxidized PAN fibers, while the apparent crystallite size of fiber decreased obviously. With the carbonization process, the cyclic ladder structure of per-oxidized fibers transferred into layer structure similar to that of graphite. The layers were oriented along the axis of carbonized fiber that contributed to the X-ray diffraction, which comprised the apparent crystallite grains. As the carbonization temperature increased, size of the layer structure in the direction perpendicular to fiber axis increased clearly, the preferential orientation was enhanced and the layer structure became much more ordered.

Dynamic relaxation behaviors of poly(methyl methacrylate)/Ga nanocomposites

Zhou Xue-Mao, Chen Xiao-Meng, Wu Xue-Bang, Shui Jia-Peng, Zhu Zhen-Gang
Acta Physica Sinica. 2011, 60 (3): 036102 doi: 10.7498/aps.60.036102
Full Text: [PDF 1330 KB] Download:(815)
Show Abstract
Two kinds of poly(methyl methacrylate)/gallium (PMMA/Ga) nanocomposites with different Ga contents (11.3% and 13.5%) were prepared by free radical polymerization. The relaxation dynamics of PMMA/Ga nanocomposite above the glass transition temperature has been investigated by mechanical spectroscopy. It was found that the peak temperatures of α relaxation of the nanocomposites increase with the increasing Ga content, but the peak heights of α relaxation decrease. Besides, the composition-dependent dynamics of the α' relaxation in PMMA/Ga nanocomposites was also studied.

Growths of InAs/GaAs and InAs/In x Ga1-x As/GaAs nanowire heterostructures

Ye Xian, Huang Hui, Ren Xiao-Min, Guo Jing-Wei, Huang Yong-Qing, Wang Qi, Zhang Xia
Acta Physica Sinica. 2011, 60 (3): 036103 doi: 10.7498/aps.60.036103
Full Text: [PDF 1627 KB] Download:(922)
Show Abstract
InAs/GaAs and InAs/In xGa1-xAs/GaAs nanowire heterostructures are grown by metal organic chemical vapor deposition via Au-assistant vapor-liquid-solid mechanism. We find that the InAs nanowires grow directly on GaAs nanowires in a random way, or they grow along the sidewall of the GaAs nanowires, and thet InAs nanowires grow vertically on GaAs nanowires by using an In x Ga1-xAs (0≤x≤1) buffer segment. It can be concluded that the influences of crystal lattice mismatch and difference in interfacial energy can be eliminated by inserting a ternary compound semiconductor buffer segment, thereby improving the crystal quality and the capability to control the growth of nanowire heterostructure.

First principles calculations of interaction between an armchair-edge graphene nanoribbon and its graphite substrate

Yu Dong-Qi, Zhang Zhao-Hui
Acta Physica Sinica. 2011, 60 (3): 036104 doi: 10.7498/aps.60.036104
Full Text: [PDF 1243 KB] Download:(992)
Show Abstract
Based on the density functional theory, first principles calculations have been performed to study interaction of armchair-edge graphene nanoribbons and their graphite substrates. As a result, it has been found that the interaction gives rise to deformation of the graphene nanoribbons and the graphite substrates, and the deformed graphene nanoribbons have the energy band structures with band gaps smaller than those of the isolatedones.

Characterization of the transparent n-type ZnO ceramic with lowresistivity prepared under high pressure

Qin Jie-Ming, Zhang Ying, Cao Jian-Ming, Tian Li-Fei, Dong Zhong-Wei, Li Yue
Acta Physica Sinica. 2011, 60 (3): 036105 doi: 10.7498/aps.60.036105
Full Text: [PDF 1258 KB] Download:(779)
Show Abstract
In this paper,the preparetion of transparent ZnO ceramic with with low resistivity by high pressure sintering was reported,and the problem of high resistivity and opaqueness for ZnO under atmospheric pressure sintering was solved. The ZnO ceramic of optimal photoelectronic performance with high transparency and low resistivity under the pressure of 5 GPa and at the temperature of 800℃ was obtained. The transmissivily is about 49%, the electronic resistivity is 0.57 Ω ·cm, the width of band gap is 3.31 eV, the carrier concentration is 8.36×1017 cm-3 and the mobility is 23 cm2 ·V-1 ·s-1. The excellent n-type electrical conductivity is attributed to the contribution of Zni and VO donor defect. The results of this work have important significance for ZnO ceramic application as photoelectronic components for ultraviolet emission.

Research on the total-dose irradiation damage effect for static random access memory-based field programmable gate array

Gao Bo, Yu Xue-Feng, Ren Di-Yuan, Li Yu-Dong, Cui Jiang-Wei, Li Mao-Shun, Li Ming, Wang Yi-Yuan
Acta Physica Sinica. 2011, 60 (3): 036106 doi: 10.7498/aps.60.036106
Full Text: [PDF 1169 KB] Download:(705)
Show Abstract
In order to investigate the total-dose irradiation effects of Altera static random access memory (SRAM)-based FPGA (field programmable gate array), the irradiation response of basic cell of FPGA, i.e. the CMOS, is studied, and the relationship of the output waveform as a function of total dose has been obtained. It indicates that the output waveforms become aberrated and the peak-peak value turns to about 1/10 of the initial value as the total dose increased, resulting from the degradation of leakage current both from field oxygen and the structure; but there are relatively high and low levels left in the output waveforms. Meanwhile, the high level cant keep the already existing state and changes to the low level, and the conversion speed is accelerated with the increase of the total dose. The low level becomes larger than the initial value. As the gate-oxygen is quite thin, the rise time, fall time, and delay of the output waveforms change little with the total dose.

Effect of vacuum thermal-annealing temperatures on the microstructure and optical properties of single-phased Ag2O film

Zhang Zeng-Yuan, Gao Xiao-Yong, Feng Hong-Liang, Ma Jiao-Min, Lu Jing-Xiao
Acta Physica Sinica. 2011, 60 (3): 036107 doi: 10.7498/aps.60.036107
Full Text: [PDF 1721 KB] Download:(748)
Show Abstract
A single-phased Ag2O film was deposited on glass substrate by direct-current reactive magnetron sputtering, and was then vacuum thermally annealed at different annealing temperatures (T A) for 1 hour. Effect of the TAon the films microstructure and optical properties was investigated by X-ray diffractometry, scanning electron microscopy and spectrophotometry. The results indicate that Ag nano-scaled particles begin to appear in the annealed Ag2O film at TA= 300 ℃. The Ag content obviously increases with increasing TA, and in particular, Ag2O phase is completely transformed into Ag at T A = 475 ℃. The evolution of the films surface morphology from dense to loose indicates that the diffusion and escape of O atoms from film surface accompanied the thermal decomposition reaction of Ag2O to Ag particles during the vacuum thermal annealing. The changes of the films transmissivity, reflectivity and absorptivity with T A are attributed to the thermal decomposition of Ag2O and the films structure evolution during annealing.

First-principles study of the electronic structure and elastic property of Li x FePO4

Ru Qiang, Hu She-Jun, Zhao Ling-Zhi
Acta Physica Sinica. 2011, 60 (3): 036301 doi: 10.7498/aps.60.036301
Full Text: [PDF 1400 KB] Download:(815)
Show Abstract
Based on density functional theory of the first-principle, the electronic structures of LiFexPO4 (x=0.0, 0.75, 1.0) are calculated. The calculated results show that Fe3d states restrained by crystalline field cannot contribute to free electrons even though Fe3d states cross the Fermi level. Meanwhile, Fe—O bond is beneficial to stabilize the alloy structure due to the p-d hybrid orbital. With lithium ion extraction, the enhanced covalent bonds appear. In LixFePO4 system, the strength of covalent bond is in the order of P—O>Fe—O>Li—O. LixFePO4 system displays brittleness of material characteristic, and the LixFePO4(x=1.0, 0.75) with lithium intercalation have stronger average bonding strength than that of FePO4.

Monte Carlo simulation on the property of ferromagnetic order of Zn1- x Mn x O Nanofilms

Gao Qian, Lou Xiao-Yan, Qi Yang, Shan Wen-Guang
Acta Physica Sinica. 2011, 60 (3): 036401 doi: 10.7498/aps.60.036401
Full Text: [PDF 1285 KB] Download:(851)
Show Abstract
Based on the analysis of ferromagnetic mechanism of diluted magnetic semiconductors (DMSs), an Ising model with multi-exchange interactions is established. The reason of the shape of ferromagnetic order is simulated by Monte Carlo (MC) simulation with the Metropolis algorithm. The result reveals that the lower concentrations of Mn doping (x) are helpful for forming the ferromagnetic order. However, with the lower concentrations of Mn doping the magnetization of the system will be smaller and the Courier temperature will be lower. The modifying efect of carrier on the formation of ferromagnetism is enhanced with the increase of x and the decrease of the anisotropy constant (K). This work predicts that the increase of K will heighten the ferromagnetism and the Courier temperature.

Microstructure formation mechanism of rapidly solidified ternary Co-Cu-Pb monotectic alloys

Yan Na, Wang Wei-Li, Dai Fu-Ping, Wei Bing-Bo
Acta Physica Sinica. 2011, 60 (3): 036402 doi: 10.7498/aps.60.036402
Full Text: [PDF 1995 KB] Download:(911)
Show Abstract
The metastable phase separation and rapid solidification of ternary Co-Cu-Pb monotectic alloys have been investigated under free fall condition. With the decrease of droplet diameter, the microstructures of Co51Cu47Pb2 and Co47Cu44Pb9 alloys display a "dendrite→core-shell→dendrite" transformation and a morphology transition from core-shell to homogeneous microstructure, respectively. X-ray diffraction analysis indicates that the solidified microstructures are composed of α(Co), (Cu) and (Pb) phases. α(Co) and (Cu) phases grow mainly in dendritic manner, and (Pb) phase is distributed interdendritically among (Cu) phase. Both experimental results and theoretical calculations reveal that the interfacial energy between (Co)/(Pb) liquid phases is larger than thoses of (Co)/(Cu) and (Cu)/(Pb) phases. The weak wetting ability between (Co) and (Pb) liquids results in the distribution of (Pb) phase inside the Cu-rich zone instead of Co-rich zone. Three possible solidification routes are deduced according to the solidification microstructure, in which the solidification process consists of phase separation L→L1(Cu)+L2(Co), peritectic transformation α(Co)+L→(Cu) and monotectic transformation L(Cu)→S(Cu)+L(Pb).

Computer simulation of the string relaxation modes of the molecule-string model for glass transition Hot!

Zhao Xing-Yu, Wang Li-Na, Fan Xiao-Hui, Zhang Li-Li, Wei Lai, Zhang Jin-Lu, Huang Yi-Neng
Acta Physica Sinica. 2011, 60 (3): 036403 doi: 10.7498/aps.60.036403
Full Text: [PDF 1196 KB] Download:(767)
Show Abstract
Monte Carlo protocols to simulate the string relaxation modes are proposed according to the Hamiltonian of the molecule-string model for glass transition. The simulated relaxation times of the 1st and 2nd modes are consistent with the predictions of the string relaxation equation of the model,thus matually verifying each other. The results show the reasonableness of not only the string relaxation equation, at least the theoretical predictions of the 1st and 2nd relaxation modes, but also the proposed simulation method, and further clarify the pictures of the molecule random energy fluctuations and jumps of the molceules in the strings, as well as provide gist and clews to the study of the multi-state molecule string relaxation dynamics and the further simulation of the complex interactions between the molecule strings.

Influence of RF power on the structure and properties of glow discharge polymer

Yan Jian-Cheng, He Zhi-Bing, Yang Zhi-Lin, Zhang Ying, Tang Yong-Jian, Wei Jian-Jun
Acta Physica Sinica. 2011, 60 (3): 036501 doi: 10.7498/aps.60.036501
Full Text: [PDF 1200 KB] Download:(821)
Show Abstract
Using trans-2-butene and hydrogen as the precursor, the glow discharge polymer films was successfully coated on KBr discs by glow discharge polymerization at different powers. The chemical structure, thermal stability of the GDP films and the deposition rate of GDP films were characterized by the FT-IR, TG and surface profiler technology. The Results show that the deposition rate, the olefinic structure, the ratio of C/H, and the content of C C in GDP films increase with the RF power increasing. The thermal stability of GDP films fabricated at higher RF power is better.

Statistical power consumption of RC interconnect tree with process fluctuation

Dong Gang, Xue Meng, Li Jian-Wei, Yang Yin-Tang
Acta Physica Sinica. 2011, 60 (3): 036601 doi: 10.7498/aps.60.036601
Full Text: [PDF 1217 KB] Download:(604)
Show Abstract
In order to effectively analyze the statistical power consumption of RC interconnect tree with process fluctuation, a method of constructing interconnect parasitic parameters and driving point admittance moments is first presented in this paper. Then, the expressions of mean and standard deviations of interconnect power consumption are obtained. The calculation results indicate that the errors of mean and standard deviations are less than 4.36 % and 6.68 % respectively compared with those calculated by the widely used Monte Carlo method. Results show that the proposed method has a good accuracy and high efficiency.

Initial growth of SrTiO3 on Sr/Si(001) studied by scanning tunneling microscope

Qiu Yun-Fei, Du Wen-Han, Wang Bing
Acta Physica Sinica. 2011, 60 (3): 036801 doi: 10.7498/aps.60.036801
Full Text: [PDF 2639 KB] Download:(774)
Show Abstract
SrTiO3 ultra-thin film was deposited on the Sr/Si(001) surface using pulsed laser deposition (PLD) at room temperature and studied using scanning tunneling microscopy (STM). After annealing at 660 ℃ for about 60 minutes in ultrahigh vacuum (UHV), nanosize islands were formed on the Sr/Si(001) surface. High resolution STM images and dI/dV mapping of islands on Sr/Si(001) were obtained. The islands can be attributed to TiSi2 islands with C49 and C54 structures. The existence of Sr on Si is not sufficient to prevent the reaction between Si and Ti in preparation of ultra-thin SrTiO3 films.

The type identification of dislocation loops by TEM and the loop formation in pure Fe implanted with H+*

Huang Yi-Na, Wan Fa-Rong, Jiao Zhi-Jie
Acta Physica Sinica. 2011, 60 (3): 036802 doi: 10.7498/aps.60.036802
Full Text: [PDF 2643 KB] Download:(1069)
Show Abstract
This paper is divided into two parts: the first part is to identify the type of dislocation loops in materials by using TEM. The inside-outside method to identify V-loops or I-loops is described in detail. The second part discusses the dislocation loops in pure Fe implanted with H+ in a accelerator and followed by aging at 673—773 K.

Microstructure and magnetic properties of the cobalt ions implanted TiO2 films

Ding Peng, Liu Fa-Min, Yang Xin-An, Li Jian-Qi
Acta Physica Sinica. 2011, 60 (3): 036803 doi: 10.7498/aps.60.036803
Full Text: [PDF 2940 KB] Download:(895)
Show Abstract
TiO2 thin films were prepared by direct current magnetron sputtering on glass substrates, then were implanted by cobalt ions, and finally annealed at 500 ℃ for 50 min. Specimens for transmission electron microscopy were prepared by peeling-scattering technology, and were observed in situ by scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and high resolution transmission electron microscopy (HRTEM). The films were identified as anatase structure. The Co ions exist mainly in a thin layer beneath the surface of the films. The implanted Co ions damage the TiO2 crystals and some of them exist as CoO. The annealing treatment could repair the TiO2 grains and make the Co ions diffuse into the TiO2 lattice. The vibrating sample magnetometer (VSM) measurements show that the Co ion implanted TiO2 films are ferromagnetic at room temperature and the annealing treatment in vacuum could enhance the ferromagnetism, which could be explained within the scope of the BMP theory.

Influence of oxygen partial pressure on the crystal quality and optical properties of Mg-doped ZnO films

Bao Shan-Yong, Dong Wu-Jun, Xu Xing, Luan Tian-Bao, Li Jie, Zhang Qing-Yu
Acta Physica Sinica. 2011, 60 (3): 036804 doi: 10.7498/aps.60.036804
Full Text: [PDF 1308 KB] Download:(874)
Show Abstract
Zn1-xMgxO films have been deposited on Al2O3(0001) substrates at different oxygen pressures by using pulsed laser deposition method. The influence of oxygen pressure on the crystal quality and optical properties of the films is studied with X-ray diffraction (XRD), transmittance spectra, and photoluminescence (PL). It is found that the crystal quality of the films lowers with increasing of oxygen pressure from 10-4Pa to 10 Pa. At the pressure of 10-4 Pa, the epitaxial relationship between the film and sapphire substrate is determined to be ZnMgO (0001)// Al2O3(0001),ZnMgO 1010]//Al2O3 1120]. In the oxygen rich environment, however, another epitaxial relationship, ZnMgO (0001)//Al2O3(0001) and ZnMgO 1010]//Al2O3 1010], is also present in the films, which is suggested to be responsible for the decline of the crystal quality. Compared with pure ZnO films, the UV peak of Zn1-xMgxO alloys shows red-shift from 3.374 to 3.332 eV with increasing oxygen working pressure increasing from 10-4 Pa up to 10 Pa. The difference in red-shifts can be attributed to the decrease of Mg content in the films resulting from the variation of oxygen pressure. A broad UV PL spectrum was observed at 10 K in the films deposited under different pressures and can be decomposed into two recombination processes of excitons, corresponding to the bound and the localized exciton luminescence, respectively. The binding energy of bound excitons in the ZnMgO films is larger than that in pure ZnO and has an increasing trend with increasing oxygen pressure.

Monoclinic phase of erbium oxide coatings fabricated by pulsed magnetron sputtering

Li Xin-Lian, Wu Ping, Qiu Hong, Chen Sen, Song Bin-Bin
Acta Physica Sinica. 2011, 60 (3): 036805 doi: 10.7498/aps.60.036805
Full Text: [PDF 1443 KB] Download:(1939)
Show Abstract
Erbium oxide coatings were fabricated by midfrequency pulsed reactive magnetron sputtering by varying the deposition conditions with respect to the sputtering power from 78 W to 124 W and substrate temperature from room temperature to 677 ℃. Atomic force microscopy, nanoindentation, X-ray diffraction and grazing incidence X-ray diffraction were used to investigate the coatings’ surface morphology, mechanical properties and crystallization behaviors. Electrical properties of the coatings were also measured. Erbium oxide coatings fabricated by pulsed magnetron sputtering have high deposition rate, varying from 28 nm/min to 68nm/min. A monoclinic Er2O3 phase is obtained in the coatings. The crystalline quality of the coatings decreases with the increasing of the sputtering power. The diffraction intensity of monoclinic phase decreases as the substrate temperature was increased from room temperature to 500 ℃ and 677 ℃. It is believed that the high deposition rate and low substrate temperature could lead to the formation of the monoclinic Er2O3 coatings. The hardness and elastic modulus of the coatings deposited at substrate temperatures from room temperature to 677 ℃ vary from 11.9 GPa to 15.7 GPa and from 179 GPa to 225 GPa, respectively. The coatings deposited from room temperature to 677℃ all have high resistivity, varying from 1.5×1012 Ω ·cm to 3.1×1012 Ω ·cm, meeting the requirements of the insulating coatings in application to fusion reactor.

Ballistic phonon transport and thermal conductance in multi-channel quantum structure at low temperatures

Ye Fu-Qiu, Li Ke-Min, Peng Xiao-Fang
Acta Physica Sinica. 2011, 60 (3): 036806 doi: 10.7498/aps.60.036806
Full Text: [PDF 1327 KB] Download:(708)
Show Abstract
By using the elastic approximation model and scattering matrix method, we investigated the acoustic phonons transport and thermal conductance in a H-branch four-channel nanostructure. The calculated results show that, for the incident acoustic phonons of low frequency, as long as the transverse width of each channel is equal, the transmission coefficient of mode 0 in each channel almost equals 0.25 and receives no influence from the changes of the other structure parameters. But for the incident acoustic phonons of high frequency, the transmission coefficient of mode 0 in each channel is very sensitive to the structure parameters and there is bigger difference corresponding to the transmission coefficients of different channels. When the temperature is very low, the thermal conductance in each channel is about 1 4 π2k2BT/(3h). With the increase of temperature, the thermal conductance of each channel changes to different degrees. By changing the length of scattering region or the transverse width of each channel, we can control the separating degree of modes and the thermal conductance of each channel efficiently and realize acoustic phonon selective transport and thermal conduction.
CONDENSED MATTER: ELECTRONIC STRUCTURE, ELECTRICAL, MAGNETIC, AND OPTICAL PROPERTIES

First-principles study on the electronic structures and structural stability of Cd-doped ZnO

Pu Chun-Ying, Tang Xin, Lü Hai-Feng, Zhang Qing-Yu
Acta Physica Sinica. 2011, 60 (3): 037101 doi: 10.7498/aps.60.037101
Full Text: [PDF 1362 KB] Download:(947)
Show Abstract
The VASP (Vienna Ab-initio Simulation Package) based on the density-functional theory (DFT) method combined with projector augmented wave (PAW) method is used to calculate the lattice parameters, band gap, density of states (DOS), and formation enthalpy of ZnCdO alloy by considering all the doping configurations. The calculation results indicate that the average parameters of wurtzite (wz) Zn1-xCdxO alloy, a and c, increase linearly, but the ratio of c/a does not change obviously with the increase of Cd content. With increasing Cd content, the band gap is reduced and the variation of band gap can be fitted by Eg(x)=3.28-5.04x+4.60x2, which is consistent with the experimental results. At a given Cd content, different doping configurations result in different Eg values, being one of the reasons of widening of the photoluminescence spectra of ZnCdO alloy. The DOS of wz-ZnCdO alloy in conduction band is shifted towards the lower energy side after Cd doping, causing the reduction of band gap. The reduction of band gap can be attributed to the contribution of 5s states of Cd. By comparing the formation enthalpy of wz-ZnCdO with those of zinc blende and rocksalt ZnCdO alloys, we find that the wurtzite phase of ZnCdO can coexist with zinc blende phase in the range of Cd content from 0.25 to 0.75 and will transit to the rocksalt phase at the Cd content of about 0.80.

First-principles calculation of electronic structure of (Zn,Al)O and analysis of its conductivity

Liu Jian-Jun
Acta Physica Sinica. 2011, 60 (3): 037102 doi: 10.7498/aps.60.037102
Full Text: [PDF 1197 KB] Download:(1126)
Show Abstract
The electronic structures of ZnO and (Zn,Al)O are investigated by using the first-principles pseudopotential plane wave method in the generalized gradient approximation. The effects of Al doping on the bonding of ZnO and the interaction between electrons are analyzed from atomic population, bond population, energy band and electronic density of states based on the molecular orbital theory. Carrier concentration of (Zn,Al)O is calculated from the first-principles calculations, furthermore the change in ZnO conductivity is analyzed. The carrier concentration and the conductivity of ZnO are increased significantly by Al doped ZnO compared with the experimental results.

First-principles calculation and experimental study of Si-doped β-Ga2O3

Zhang Yi-Jun, Yan Jin-Liang, Zhao Gang, Xie Wan-Feng
Acta Physica Sinica. 2011, 60 (3): 037103 doi: 10.7498/aps.60.037103
Full Text: [PDF 1641 KB] Download:(1037)
Show Abstract
By using the first-principles ultra-soft pseudo-potential (USP) approach of the plane-wave based upon density functional theory (DFT), the energy band structure, electron density of states, difference in charge density and optical properties of the intrinsic β-Ga2O3 and Si-doped β-Ga2O3 were calculated under generalized gradient approximation (GGA). The intrinsic β-Ga2O3 and Si-doped β-Ga2O3 films were deposited on sapphire (0001) substrates by pulsed laser deposition (PLD), the optical absorption spectra and reflectance spectra were measured. The results showed that the whole energy band moved to the low energy side, the conductivity was n-type, the optical band gap increased, the absorption edge shifted to short wavelength, and the reflectivity decreased. The calculation results are consistent with experimental data.

First-principles study on the electronic structures of diadochic compounds Bi2Te3- x Sex(x ≤3)

Liu Feng-Li, Jiang Gang, Bai Li-Na, Kong Fan-Jie
Acta Physica Sinica. 2011, 60 (3): 037104 doi: 10.7498/aps.60.037104
Full Text: [PDF 1786 KB] Download:(1100)
Show Abstract
Based on density functional theory with spin-orbit corrections included, the electronic structures of diadochic compounds Bi2Te3-xSex(x≤3) have been calculated by first-principles full-potential linearized augmented plane-wave method. The calculated results indicate that spin-orbit interaction is crucial in understanding the gap structure near the Fermi energy. Bi2Te3-xSex(x≤3) are indirect-gap semiconductors, and there is a saddle point at the Γ point. The density of states near Fermi level mainly consists of p orbitals of each atom. For the chemical bonding of the various layers of atoms, the covalence bond component of X(1)—Bi is stronger than that of X(2)—Bi (X=Te, Se). With the increase of the Se mol ratio in the systems, the unit cell volume is reduced, the energy of the system is increased, and the covalence bond component of Te(1)—Bi, Se(2)—Bi, Se(1)—Bi is gradually enhanced.

Non-solvent addition induced self-organization for enhancement of performance of poly(3-hexylthiophene) organic field-effect transistors

Tian Xue-Yan, Zhao Su-Ling, Xu Zheng, Yao Jiang-Feng, Yao Jiang-Feng, Zhang Fu-Jun
Acta Physica Sinica. 2011, 60 (3): 037201 doi: 10.7498/aps.60.037201
Full Text: [PDF 1435 KB] Download:(626)
Show Abstract
In order to enhance the performance of poly(3-hexylthiophene) (RR-P3HT) organic field-effect transistors (OFET) by low temperature solution-process of non-solvent addition (acetonitrile and ethanol), the resulting self-organization of polymer semiconductor layer and performance of RR-P3HT OFET are studied in this paper. The results fshow that an appropriate non-solvent addition (acetonitrile and ethanol) promotes the formation of more microcrystalline lamellae and improves the self-organization of polymer semiconductor layer, resulting in electrical properties enhancement of polymer OFET. The results indicate that the field-effect of RR-P3HT OFET with 5% acetonitrile addition can reach 3.39×10-3 cm2/V ·s, which is higher by a factor of 8 than that with 0% acetonitrile addition. Encessive non-solvent addition (acetonitrile and ethanol) leads to more precipitates which reduce microcrystalline lamellae and lowers the quality of polymer film, resulting in performance degradation of polymer OFET.

Influence of NPB:CBP modulated hole transporting layer on yellow organic light-emitting device characteristics

Chen Su-Jie, Yu Jun-Sheng, Wen Wen, Jiang Ya-Dong
Acta Physica Sinica. 2011, 60 (3): 037202 doi: 10.7498/aps.60.037202
Full Text: [PDF 1200 KB] Download:(1196)
Show Abstract
Organic light-emitting devices (OLEDs) with the structure of indium-tin oxide (ITO)/N, N'-diphenyl-N, N'-bis(1-naphthyl-pheny1)-1, 1'-biphenyl-4, 4'-diamine (NPB):4, 4'-N, N'-dicarbazole-biphenyl (CBP)/CBP:bis iridium (acetylacetonate) /2, 9-dimethyl-4, 7-diphenyl-phenanthroline (BCP)/Mg:Ag were fabricated. A doping system consisting of NPB and CBP was employed as the modulated hole transporting layer. The electroluminescent characteristics of the OLEDs were investigated by adjusting the concentration proportions of NPB:CBP doping system. The results showed that the hole transporting capability can be adjusted and the power efficiency was remarkably affected by different doping concentration of NPB:CBP system. Optimized yellow light OLED with a maximum power efficiency of 18.1 lm/W was obtained with an optimum concentration proportion of NPB:CBP of approximately 1 ∶3. The improved OLED performance was attributed to the reduction of hole injection and low transporting capability by doping bipolar host material CBP in hole transporting layer, which significantly enhanced charge carrier balance and electron-hole recombination probability.

Influence of spin-coating rate and annealing method of water-soluble CuPc on blue organic light-emitting devices performance

Gao Li-Yan, Zhao Su-Ling, Xu Zheng, Zhang Fu-Jun, Sun Qin-Jun, Zhang Tian-Hui, Yan Guang, Xu Xu-Rong
Acta Physica Sinica. 2011, 60 (3): 037203 doi: 10.7498/aps.60.037203
Full Text: [PDF 1597 KB] Download:(1016)
Show Abstract
Investigated in this work are the effects of the spin-coating rate of water-soluble copper phthalocyanine (WS-CuPc) and the annealing method of WS-CuPc films obtained at the optimal spin-coating rate on the performances of blue organic light-emitting devices (OLEDs). The OLEDs, eack with a configuration of ITO/WS-CuPc/NPB/Be(PP)2/LiF/Al, are fabricated by using WS-CuPc as hole injection layer, NPB as hole transport layer and Be(PP)2 as emission layer separately. In our experiments, a new annealing method of WS-CuPc is used first for heating the ITO glass, and then for spin-coating the WS-CuPc. The performances of the device prepared with the new annealing method are compared with those of the devices prepared with the traditional annealing method or no annealing treatment. And the effects of different annealing treatments on the surface topography are analyzed by atomic force microscope (AFM). The experimental results demonstrate that there exists an optimal spin-coating rate of WS-CuPc, about 3000 r/min. Based on the optimal spin-coating rate of WS-CuPc, the roughness of the film prepared with the new annealing method is lowest and the performances of the device are best.

Scanning tunnelling microscope investigation of the TiSi2 nano-islands on Sr/Si(100) surface

Yang Jing-Jing, Du Wen-Han
Acta Physica Sinica. 2011, 60 (3): 037301 doi: 10.7498/aps.60.037301
Full Text: [PDF 1829 KB] Download:(679)
Show Abstract
For the investigation of the interface stability of SrTiO3/Sr/Si(100) system during high temperature annealing process, we have grown 1—2 atom layer SrTiO3 ultra-thin film on Sr/Si(100)-2×1 substrate using pulsed laser deposition technique. After annealing, we found that nano-scale islands appear in the surface. These nano-islands show metallic property by scanning tunneling microscopy, and the STM image shows bias voltage dependence of these nano-islands. Oxygen in the oxide reacts with silicon and forms volatile silicon monoxide during vacuum annealing, while Ti atoms in the oxide react with silicon, forming C-54 TiSi2 islands.

Regulating effect of a bonding bridge on rectifying performance in molecular rectifiers

Pan Jin-Bo, Zhang Zhen-Hua, Qiu Ming, Guo Chao
Acta Physica Sinica. 2011, 60 (3): 037302 doi: 10.7498/aps.60.037302
Full Text: [PDF 1458 KB] Download:(618)
Show Abstract
Using the density-functional theory and the non-equilibrium Greens function method, we investigated the electronic transport properties and rectifying performance of three different molecular devices based on different molecular configurations of the same molecule species. The results show that rotation of a mid-benzene ring (bonding bridge—πbridge) can change the delocalization of a molecular orbital and thus change their transport property and rectifying performance. This finding suggests that the variation of the bonding bridge orientation can control the rectifying performance of a molecular device effectively. It is of significance for designing a novel molecular rectifier.

Non-classical state effect on the persistent current in one-dimensional mesoscopic ring with electron-phonon interaction

Luo Zhi-Hua, Liang Guo-Dong
Acta Physica Sinica. 2011, 60 (3): 037303 doi: 10.7498/aps.60.037303
Full Text: [PDF 1159 KB] Download:(730)
Show Abstract
Based on the efficacy of the phonon coherent state and with consideration of the non-classical effect of the squeezed state of phonon, the influence of the electron-magnon interaction and the electron-phonon interaction on the persistent current in one-dimensional mesoscopic ring is studied. Compared with the free ring, our study shows that in one-dimensional mesoscopic ring, the amplitude of the persistent current exponentially diminishes due to the electron-magnon interaction. For the normal state electron, the interaction of the electron-phonon causes the persistent current to weakendce to the Debye-Waller effect. However, taking the correlation between the hopping electron states and the one-phonon coherent states into the equation, the ground energy of the mesoscopic system is declined in a large scale. In result, the persistent current In is increased substantially. On the other hand, taking the behavior of the two-phonon coherent state into account, as the effect of the squeezed states of phonons maintains the phase coherence of electrons, so the Debye-Waller attenuation is weakened effectively. Especially, when the squeezed angle is larger, because of the non-adiabatic correlation between the squeezed-phonon states and the coherent states of phonon, it causes a significant decline in the ground state energy and a significant increase in the squeezed angle, thus persistent current has a even more significant increase. It should be pointed out, that the persistent current shows period oscillation as the external magnetic flux changes. Even the external magnetic flux Φem=0, still the persistent current of the intrinsic has I ~ n≠0. The system continuoues to support the equilibrium spin and charge flow, the external magnetic flux only plays the role of an adiabatic parameter.

The electrical transport properties of Ag/Nd0.7Sr0.3MnO3 ceramic interface

Chen Shun-Sheng, Huang Chang, Wang Rui-Long, Yang Chang-Ping, Medvedeva I
Acta Physica Sinica. 2011, 60 (3): 037304 doi: 10.7498/aps.60.037304
Full Text: [PDF 1289 KB] Download:(929)
Show Abstract
The transport properties of interface between metal electrode and Nd0.7Sr0.3MnO3 bulk have been investigated under 2-wire measuring mode using permeating Ag and Ag-glue contact, respectively. The results show that, for the permeating Ag contact, the measured results are similar to that of 4-wire measurement, and an ohmic character is obtained without EPIR effect. However, a strongly nonlinear V-I curve appears and exhibits a stable EPIR effect for the Ag-glue contact. Besides, It also shows remarkable difference when loaded with alternating current for the two different kinds of contacts. For the former, the real part of impedance R' increases with increasing frequency which is attributable to the skin effect; for the latter, however, the R' is of about megohm order of magnitude and the R' peak decreases with increasing frequency. Moreover, the R' peak splits into two peaks which respectively move to high and low temperature when further increasing the frequency. In combination with the data of scanning electron microscopy, the differences of electrical transport are discussed.

Study of zinc tin oxide thin-film transistor

Wang Xiong, Cai Xi-Kun, Yuan Zi-Jian, Zhu Xia-Ming, Qiu Dong-Jiang, Wu Hui-Zhen
Acta Physica Sinica. 2011, 60 (3): 037305 doi: 10.7498/aps.60.037305
Full Text: [PDF 1153 KB] Download:(990)
Show Abstract
Thin film transistors with zinc tin oxide as the active channel layer were fabricated on ITO glass by rf magnetron sputtering. SiO2 gate dielectric was grown using plasma-enhanced chemical vapor deposition (PECVD). These devices operate with a maximum field effect mobility of 9.1 cm2/V ·s, threshold voltage of -2 V, and current on/off ratio of 104.

Influence of AC current on the profile of GMI effect in Fe-based nanocrystalline wire

Li Yin-Feng, Feng Su-Qin, Wang Jian-Yong
Acta Physica Sinica. 2011, 60 (3): 037306 doi: 10.7498/aps.60.037306
Full Text: [PDF 1208 KB] Download:(775)
Show Abstract
The influence of AC current (with amplitud of Iac =0.2—20 mA and frequency of f=1 kHz—1 MHz) upon the profile of gian magnetoimpedance (GMI) effect of a Fe-based nanocrystalline wire with transverse domain structure have been investigated. The experiment indicates that the GMI effect of the sample exhibits a two-peak feature. With the increasing of f, the peak field Hm increases, while Hm decreases even to H=0 when Iac increases. According to the current theoretical models, the peak field Hm should conrrespond to the transverse anisotropy field Hk, Hm=Hk. However, we found that this conclusion is correct only for the case of very small AC current. So a relationship Hm=Hk cos3θ, where θ is the angle between saturation magnetisation and the axis of wire, has been deduced by minimizing the energy in the process of magnetisation rotation. The experiments can be explained by this result.

Fabrication of single-domain GdBCO bulk superconductors using a novel configuration

Li Guo-Zheng, Yang Wan-Min
Acta Physica Sinica. 2011, 60 (3): 037401 doi: 10.7498/aps.60.037401
Full Text: [PDF 1473 KB] Download:(663)
Show Abstract
Based on the top seeded infiltration and growth technique (TSIG), a novel configuration was employed to fabricate single-domain Gd-Ba-Cu-O (GdBCO) bulk superconductors. And the morphology, microstructure, and superconducting properties of the products were investigated in detail. The results indicate that, employing the novel configuration can increase the supporting ability of the liquid source pellet, and the slope or collapse of the sample during the heat treatment process can be effectively avoided, thus the stability and repeatability of the experiments are advanced. In addition, the novel configuration also contributes to the complete growth of the whole bulk.

Theoretical research on two gaps in cuprate superconductors:an electronic Raman scattering study

Lu Hong-Yan, Chen San, Liu Bao-Tong
Acta Physica Sinica. 2011, 60 (3): 037402 doi: 10.7498/aps.60.037402
Full Text: [PDF 1277 KB] Download:(849)
Show Abstract
Electronic Raman experiments have shown the presence of two types of gaps in hole-doped cuprate superconductors: one is the gap that increases with underdoping and survives in the pseudogap normal state and the other is the gap that traces the superconducting dome and disappears above the transition temperature. This two-gap behavior is important in that it is related to the mechanism of the pseudogap. By calculating the electronic Raman spectra we show that this behavior is consistent with the picture in which the d-wave superconducting (SC) order and d-density-wave (DDW) order compete in the phase diagram. In particular, the energy of the B1g peak is determined by both the SC and the DDW orders, increases with underdoping and survives in the DDW normal state. On the other hand, the B2g peak is shown to be sensitive to the SC order alone, and thus vanishes in the normal state (even if in the presence of the DDW order). The doping dependence and the temperature dependence of the peak energies in the two channels accord nicely with recent experimental results, which strongly supports the competing-order point of view for the superconducting and pseudogap phases.

Microscopic mechanism of the zero-field splitting parameters for 6 S(3d5) state ions at trigonal symmetry crystal filed

Yang Zi-Yuan
Acta Physica Sinica. 2011, 60 (3): 037501 doi: 10.7498/aps.60.037501
Full Text: [PDF 1231 KB] Download:(621)
Show Abstract
The microscopic mechanism of the zero-field splitting parameters (ZFS) including D and (a-F) for 6 S(3d5) state ion in trigonal-symmetry crystal field have been investigated using the complete diagonaliztion method (CDM) by taking into account the spin-spin (SS), the spin-other-orbit (SOO) and the orbit-orbit (OO) magnetic interactions besides the well-known spin-orbit (SO) magnetic interaction. It was found that the contribution to the ZFS parameters D and (a-F) arising from the spin-orbit (SO) magnetic interaction is the most important in most of the crystal field (CF) ranges,but the contribution to the zero-field splitting (ZFS) parameter D and (a-F) from the other three mechanisms, including the SS mechanism, SOO mechanism and OO mechanism, cant be ignored. The ZFS parameters D and (a-F) arise from the net spin quartet states as well as the combined effects of the spin doublet states and the spin quartets states, and the contribution to the ZFS parameters from the net spin doublet states are zero. Our investigation shows that the rank-2 ZFS parameter D primarily results from the net spin quartet states whereas the rank-4 ZFS parameter (a-F) primarily results from the combined effect of the spin doublet states and the spin quartet states. An illustrative evaluation is performed for the typical crystal material Fe3+: Al2O3. Good agreement between the theoretical values and the experimental finding are obtained.

The analytical investigation of the magnetic orientation and hysteresis loop in exchange-spring magnetic multilayers

Deng Ya, Zhao Guo-Ping, Bo Niao
Acta Physica Sinica. 2011, 60 (3): 037502 doi: 10.7498/aps.60.037502
Full Text: [PDF 1287 KB] Download:(799)
Show Abstract
Using the interface coupling constant Ji and the soft layer thickness Ls as the main variables, the changes of the magnetic moments with the applied field and the hysteresis loops of Nd2Fe14B/α-Fe trilayers, whose easy axes of all layers lie in the film plane, have been investigated. Analysis shows that Ji has significant influence on the magnetic orientation, the pinning field HP and the coercivity mechanism. When Ls is small, HP equals to HN, where the coercivity mechanism transforms from nucleation to pinning as Ji decreases, whereas for large Ls this trend is reversed. The critical thickness, at which the nucleation field and pinning field detaches, decreases as Ji decreases. When the reduced exchange coupling is considered, the rigid composite magnet appears only when Ls is very small. The reduced exchange coupling leads to a sudden change of angle of magnetization at the interface, which results in the change of the behavior of the trilayers from the single-phase one to the two-phase one and in the decrease of HN, whereas HP increases when Ls is larger.

Theory of giant magneto-impedance effect in amorphous ribbon with transverse bias magnetic field

Bao Bing-Hao, Ren Nai-Fei, Luo Ying
Acta Physica Sinica. 2011, 60 (3): 037503 doi: 10.7498/aps.60.037503
Full Text: [PDF 1182 KB] Download:(720)
Show Abstract
Taking into account the amorphous alloy ribbon with the 180°magnetic domain walls and transverse bias magnetic field, and adopting multi-domain structure model, the theory of giant magneto-impedance (GMI) effect was found by minimizing the total free energy and by the solution of the Maxwell’s equations combining with Landau-Lifshitz equation. A new four-state method is proposed to calculate the average magnetic permeability of four states of the amorphous materials, which is used to replace the permeability obtained based on the single domain model. The method has an advantage in explaining the GMI effect over the theory established by single domain model.

Stability and magnetism of fcc single-crystal nickel nanowires by first principles calculations Hot!

Cheng Zhi-Da, Zhu Jing, Sun Tie-Yu
Acta Physica Sinica. 2011, 60 (3): 037504 doi: 10.7498/aps.60.037504
Full Text: [PDF 1316 KB] Download:(1000)
Show Abstract
The stability and magnetism in fcc single-crystal nickel nanowires with low-index axial direction are studied by first principles methods in this work. For fcc nickel nanowires, it is found that [110] is the most stable direction, while [111] is less stable and [001] the least stable. Nickel nanowires can be described by a simple core-shell model. The core atoms of nanowires have almost the same magnetic moment as in bulk metal. Surface atoms of nickel nanowires have larger atomic magnetic moments in varying degrees related to axial direction. In our calculated nanowires with low-index axial directions, surface atoms in [110] nanowires have lowest magnetic moments while those in [100] nanowires have the largest.

Magnetostriction-jump effect in〈110〉 oriented Tb0.3Dy0.7Fe1.95 crystal after non-coaxial field annealing

Zhang Chang-Sheng, Ma Tian-Yu, Yan Mi
Acta Physica Sinica. 2011, 60 (3): 037505 doi: 10.7498/aps.60.037505
Full Text: [PDF 1593 KB] Download:(765)
Show Abstract
An〈110〉 oriented Tb0.3Dy0.7Fe1.95 rod was annealed under a field of 0.3 T, which was applied 35° away from its axis. Magnetostriction-jump effect of the magnetically annealed crystal was investigated under a series of uniaxial compressive pre-stresses ranging from 0 to 30 MPa. The magnetically annealed crystal possessed much higher saturation magnetostriction λs than the ones without applying any pre-stresses. When the compressive pre-stress was less than 20 MPa, the magnetically annealed specimen still exhibited obvious magnetostriction jump effect, possessing improved saturation magnetostriction λs and enhanced burst magnetostriction λm. A satisfactory magnetostriction as high as 2315×10-6 could be obtained in the annealed crystal with the application of a pre-stress of 20 MPa. Furthermore, under a compressive pre-stress below 5 MPa, the critical field at which the magnetostriction-jump effect occurs also decreased, which was beneficial for low field applications. Difference in the magnetization processes caused by magnetic annealing was revealed through investigating the pre-stress dependences of the burst field Hjump and the distribution width of non-180° domain wall motion. Magnetic force microscopy images showed the changes of magnetic domain configurations induced by field annealing. Effects of the induced additional anisotropy on the magnetostrictive behaviors were also discussed.

Dielectric properties and nonlinear current-voltage behavior of MgTiO3-doped CaCu3Ti4O12 ceramics

Cao Lei, Liu Peng, Zhou Jian-Ping, Wang Ya-Juan, Su Li-Na, Liu Cheng
Acta Physica Sinica. 2011, 60 (3): 037701 doi: 10.7498/aps.60.037701
Full Text: [PDF 1496 KB] Download:(735)
Show Abstract
The CaCu3Ti4O12-xMgTiO3(x= 0, 0.25, 0.5, 1.0) ceramics have been prepared by a solid-state reaction method. The effects of MgTiO3 doping on the phase structure, microstructure and dielectric properties of CaCu3Ti4O12 ceramics have been investigated. The results indicate that MgTiO3 doping not only reduced the dielectric loss of low frequency range and raised the breakdown voltage but also significantly improved the I-V nonlinearity coefficient. The optimized properties of MgTiO3 doped CaCu3Ti4O12 can be well explained by the uniformity of the grains, the reduction of the average grain boundary thinkness and the enhancement of the grain boundary resistance. Among the CaCu3Ti4O12-MgTiO3 specimens in this work, the CaCu3Ti4O12-0.5MgTiO3 specimen has achieved the best comprehensive properties, which include a dielectric constant (εr) of 53958, dielectric loss (tanδ) of 0.06 at 1 kHz, breakdown voltage (Eb) of 295 V/mm and a large nonlinearity coefficient of 66.3.

Analysis of Y2O3 doped TiO2 films topography prepared by radio frequency magnetron sputtering

Cao Yue-Hua, Di Guo-Qing
Acta Physica Sinica. 2011, 60 (3): 037702 doi: 10.7498/aps.60.037702
Full Text: [PDF 2218 KB] Download:(698)
Show Abstract
Y2O3-TiO2 composite film were deposited on Si substrate at room temperature by means of radio frequency magnetron sputtering. The crystalline state and topography of the film before and after annealing were measured by XRD and AFM, and the mechanism of the film being more compact was discussed. The result revealed that the evenness and compactness of the film can be improved with increasing the sputtering power, which is due to the fact of more Y2O3 filling the pores around TiO2with raising sputtering power, which inhibited the growth of big TiO\-2 grains and improved the evenness and compactness of film. After annealing, XRD pattern indicated that the addition of Y2O3 favors the formation of rutile TiO2 film which has high-dielectric constant.

The design of a quasi-omnidirectional tabulate metamaterial absorber

Gu Chao, Qu Shao-Bo, Pei zhi-Bin, Xu Zhuo, Liu Jia, Gu Wei
Acta Physica Sinica. 2011, 60 (3): 037801 doi: 10.7498/aps.60.037801
Full Text: [PDF 1254 KB] Download:(769)
Show Abstract
We report the design of a quasi-omnidirectional tabulate metamaterial absorber, which is substantiated on the double-faced absorbing, polarization-insensitive and wide-angle property of the metamaterial cell. Both theoretical and simulated results reveal that our absorber surely has a distinct absorption point with double-faced absorbing property near 6.18 GHz, which is not influenced significantly by the polarization angle and the angle of incidence. The retrieved impedance indicates the electromagnetic resonance of the metamaterial could be tuned to match approximatively the impedance of the free space to suppress the reflectance at the absorption frequency. The distributions of the power loss indicates the strong absorption is mainly due to dielectric loss of the substrates and the design of adopting two different substrates could make the coupling of the front absorber and the back absorber depressed, which effectively suppresses the transmission caused by the coupling. This metamaterial absorber may have applications in many scientific and technological areas.

The electronic structure and infrared spectroscopy of Al-H and Fe-H codoped rutile-type TiO2

Zhang Zheng-Jie, Meng Da-Wei, Wu Xiu-Ling, He Kai-Hua, Fan Xiao-Yu, Liu Wei-Ping, Huang Li-Wu, Zheng Jian-Ping
Acta Physica Sinica. 2011, 60 (3): 037802 doi: 10.7498/aps.60.037802
Full Text: [PDF 1394 KB] Download:(807)
Show Abstract
Rutile from Shuanghe and Bixiling area in the Dabie Orogen were investigated by Micro- Fourier transform infrared spectroscopy (FTIR). The results show that all the grains exhibit a sharp band near 3280 cm-1 or 3295 cm-1. Two structures have been suggested about the position of H in rutile, namely the chanel center (CC) and basal octahedron edge (BOE) models. The lattice structure and electronic band structure of Al—H and Fe—H codoped rutile TiO2 has been calculated by first-principles method. According to O—H bond vibration frequency of FTIR and O—H…O bond distance between O—O of computational results, we deduce that modified channel center (MCC) model is more reasonable. The calculation results indicate that the t2g state of Fe overlaps with the O 2p state, which will narrow the band gap and lead to red shift in optical absorption spectra.

Mid-infrared spectroscopic properties of geometrically frustrated basic cobalt chlorides

Liu Xiao-Dong, Tao Wan-Jun, Zheng Xu-Guang, Hagihala Masato, Meng Dong-Dong, Zhang Sen-Lin, Guo Qi-Xin
Acta Physica Sinica. 2011, 60 (3): 037803 doi: 10.7498/aps.60.037803
Full Text: [PDF 1229 KB] Download:(655)
Show Abstract
Three types of FTIR spectrometers were employed to measure the mid-infrared (4000—400 cm-1) absorption spectra of geometrically frustrated hydroxyl cobalt chloride Co2(OH)3Cl, and the intrinsic absorption peaks in the functional group region and fingerprint region were selected and assigned to corresponding vibrational modes according to its known crystal structure. In the assigning process, great emphasis was laid on analyzing the exact experimental data of hydroxyl stretching vibration mode vOH, that is, estimating the free vOH of the Co3—OH group without any hydrogen bond (H-bond), to obtain the red-shift which reflects the formation of an H-band in Co2(OH)3Cl. A 156 cm-1 red-shift is obtained theoretically which demonstrates the presence of non-negligible weak H-bonds, and eventually result in the discovery of the rarely reported trimeric H-bond in the field of crystalline materials, which consists of three independent hydroxyl donors and only one Cl- acceptor. We explained the relative weakness of this kind of hydrogen bond which may have a critical effect on the lattice symmetry and magnetic structure.

A new method to measure the carrier concentration of p-GaN

Zhou Mei, Zhao De-Gang
Acta Physica Sinica. 2011, 60 (3): 037804 doi: 10.7498/aps.60.037804
Full Text: [PDF 1226 KB] Download:(866)
Show Abstract
A new method to measure the carrier concentration of p-GaN is proposed. The main idea is as follows: the difference between p-n+ structure GaN ultraviolet photodetector’s quantum efficiency at two different wavelengths varies remarkably with increasing reversed bias, and the most characteristic change occurs at a reversed voltage under which the p-GaN layer starts to be completely depleted, consequently the carrier concentration of p-GaN can be derived basing on this effect. The simulation results prove the validity of the idea even under the condition of high surface recombination velocity and bad ohmic contact. The thickness choice of p-GaN samples during the carrier concentration test experiment using this method is investigated. It is shown that the optimized thickness of p-GaN decreases with the increase of carrier concentration of p-GaN samples.

Preparation and luminescent properties of SrMoO4:Eu3+phosphor for light emitting diode

Tang Hong-Xia, Lü Shu-Chen
Acta Physica Sinica. 2011, 60 (3): 037805 doi: 10.7498/aps.60.037805
Full Text: [PDF 1208 KB] Download:(336)
Show Abstract
The SrMoO4:Eu3+red phosphors that can be excited effectively by the ultraviolet, near ultraviolet and blue light emitting diode (LED) were prepared by chemical coprecipitation. The crystal structure and luminescent properties of the SrMoO4:Eu3+ phosphors were investigated. The X-ray diffraction patterns showed that the SrMoO4:Eu3+synthesized by the process was a pure phase with tetragonal structure. The excitation spectrum of the SrMoO4:Eu3+red phosphors consisted of a broad band peak and a series of sharp peaks, and since the strong peaks were located at 280 nm (the broad band center), 395 nm and 465 nm, respectively, the phosphor can be excited effectively by the UV LED and Blue LED. The emission spectrum excited by 395 nm showed a strong emission peak at 613 nm, originating from the 5D07F2transition of Eu3+ions. The Eu3+ion concentration has great influence on the crystal parameters, the crystal symmetries and the luminescent properties. The influence of different concentrations of doped Eu3+ions on the luminescent intensity of SrMoO4:Eu3+was studied and the optimal doping concentration was found to be 15%.

Luminescent properties of Eu3+ doped Gd2W2O9 and Gd2(WO4)3 nanophosphors

Feng Xiao-Hui, Meng Qing-Yu, Sun Jiang-Ting, Lü Shu-Chen, Sun Li-nan
Acta Physica Sinica. 2011, 60 (3): 037806 doi: 10.7498/aps.60.037806
Full Text: [PDF 1700 KB] Download:(347)
Show Abstract
Eu3+ doped Gd2W2O9 and Gd2(WO4)3 nanophosphors with different concentrations were prepared via a co-precipitation method. The structure and morphology of the nanocrystal samples were characterized by using X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). The emission spectra and excitation spectra of the samples were measured, the J-O parameters and the quantum efficiencies of the 5D0 level of Eu3+ of the samples were calculated, and the concentration quenching curves of Eu3+ luminescence in different hosts were given. The study results indicate that similar to the Gd2(WO4)3:Eu, the red emission of Eu3+ 5D07F2 transition in Gd2W2O9:Eu can also be effectively excited by 395 nm near-UV light and 465 nm blue light. So the Gd2W2O9:Eu red phosphors may have a potential application for white light emitting diodes.

Photovoltaic effect of a-C: Fe/AlOx /Si based heterostructures

Wu Li-Hua, Zhang Xiao-Zhong, Yu Yi, Wan Cai-Hua, Tan Xin-Yu
Acta Physica Sinica. 2011, 60 (3): 037807 doi: 10.7498/aps.60.037807
Full Text: [PDF 1353 KB] Download:(812)
Show Abstract
The photovoltaic effect of a-C: Fe/AlOx/Si based heterostructures prepared by Pulsed Laser Deposition (PLD) and its applications for solar cells were investigated. Thin alumina layer with a thickness of ~2nm was introduced to the interface between carbon and silicon, and the photovoltatic properties, such as open circuit voltage of ~0.33 V and short current density of ~4.5 mA/cm2, were improved dramatically compared with the samples without the insulation alumina layer. This may be related to the improvement of interface quality, where there are lower recombination centers such as defects and traps, which are approved by the C-V measurement. This work may shed light on the carbon/silicon based solar cells.

Investigation of luminescence properties of basal plane dislocations in 4H-SiC

Miao Rui-Xia, Zhang Yu-Ming, Tang Xiao-Yan, Zhang Yi-Men
Acta Physica Sinica. 2011, 60 (3): 037808 doi: 10.7498/aps.60.037808
Full Text: [PDF 1179 KB] Download:(855)
Show Abstract
Luminescence properties of basal plane dislocations in 4H-SiC are studied by means of cathodoluminescence(CL) and defect selective etching. It is found that basal plane screw dislocations (BTSD) and basal plane mixed dislocations (BMD) have green and blue-green luminescence properties, respectively. The spectrum peaks near 530 nm and 480 nm correspond to BTSD and BMD,respectively. It is found from measurement that the luminescence peak from BMD is blue-shifted. The atoms of BTSD near the dislocation core are affected by tensile stress along the Burger’s vector direction, leading to its band gap narrowed. In addition, the Burger’s vector of BMD has both screw and edge components. It is the edge component that is responsible for the band gap broadening. In other words, the wavelength from BMD is shorter than that from BTSD.

Single-photon interference based on a single InAs quantum dot

Li Yuan, Dou Xiu-Ming, Chang Xiu-Ying, Ni Hai-Qiao, Niu Zhi-Chuan, Sun Bao-Quan
Acta Physica Sinica. 2011, 60 (3): 037809 doi: 10.7498/aps.60.037809
Full Text: [PDF 1186 KB] Download:(871)
Show Abstract
Single InAs quantum dot (QD) sample is grown by molecular-beam epitaxy (MBE), and the photoluminescence (PL) from a single QD at 5 K is measured. By means of Hanbury-Brown and Twiss (HBT) setup, we measure the photon correlation of the PL which indicates that the PL of QD is single-photon emission. This single-photon source is used to demonstrate experimentally the single-photon interference via Mach-Zehnder (MZ) interferometer. In addition, the measured interference and fringe visibility are analyzed by changing the different linear polarization of the photon between two arms of MZ interferometer.
INTERDISCIPLINARY PHYSICS AND RELATED AREAS OF SCIENCE AND TECHNOLOGY

Surface morphology and optical properties of Ta2O5 films prepared by radio frequency sputtering

Di Guo-Qing
Acta Physica Sinica. 2011, 60 (3): 038101 doi: 10.7498/aps.60.038101
Full Text: [PDF 1633 KB] Download:(2302)
Show Abstract
Ta2O5 films were deposited at room temperature by radio frequency(RF) sputtering with the target of bulk Ta2O5, in Ar or Ar-O2 mixture atmosphere. The reflectivity spectra measured from two sides of a film are compared to evaluate the optical absorption of the film. It is found that the excess optical absorption arises from deficiency in oxygen during sputtering. These defects can be eliminated effectively by selecting adequate Ar-O2 mixture and power for sputtering, and unabsorbing Ta2O5 films with compactness and smoothness can be obtained without annealing.

Finite size effect of the ballistic depositionmodel with shadowing

Hao Da-Peng, Tang Gang, Xia Hui, Han Kui, Xun Zhi-Peng
Acta Physica Sinica. 2011, 60 (3): 038102 doi: 10.7498/aps.60.038102
Full Text: [PDF 1184 KB] Download:(2074)
Show Abstract
The model of ballistic deposition (BD) with shadowing means that the tilt incidence of particles in a certain angle of distribution is taken into account based on the BD model. In this paper,in order to investigate the finite size effect and the scaling properties of the BD with shadowing,the extrapolation method is used to determine the asymptotic scaling exponents of the model in the large-size limit. The simulation results illustrate that the finite size effect on BD with shadowing is different from that on BD, and the shadowing as a nonlocal interation can significantly change the scaling properties of BD model.

The effect of oxidation randomly textured up-pyramid on the silicon solar cell

Zhou Chun-Lan, Li Xu-Dong, Wang Wen-Jing, Zhao Lei, Li Hai-Ling, Diao Hong-Wei, Cao Xiao-Ning
Acta Physica Sinica. 2011, 60 (3): 038201 doi: 10.7498/aps.60.038201
Full Text: [PDF 1654 KB] Download:(1062)
Show Abstract
Thermally grown silicon dioxide is commonly used in high-efficiency monocrystalline silicon solar cell designs as a diffusion mask, electroless plating mask, passivation layer and rudimentary anti-reflection coating. These high efficiency device designs also utilize upright random textured up-pyramids etched by alkalinous solution to minimize front surface reflection. The silicon solar cells passivated with thermal SiO2/plasma SiN stacks have the evident character: the dark reverse current-voltage curve presents "soft breakdown", and the shunt resistance is lower than that of silicon solar cells passivated with the plasma SiN. The study shows that the cause of monocrystalline silicon solar cell performance degradation is the dislocation induced by the thermal growth of silicon dioxide on textured wafers. The performance of thermal SiO2/plasma SiN stack passivated silicon solar cells has evident improvement when a 2-min isotropic etching was applied after surface texturing to round off the pyramids.

Preparation and characterization of positive materials LiMn1-xFexPO4(0<x<1) for lithium ion batteries

Peng Wei, Yue Min, Liang Qi, Hu She-Jun, Hou Xian-Hua
Acta Physica Sinica. 2011, 60 (3): 038202 doi: 10.7498/aps.60.038202
Full Text: [PDF 1514 KB] Download:(763)
Show Abstract
In this study, a series of phase-pure LiMn1-xFexPO4/C (x=0.2, 0.4, 0.6) cathode materials were successfully synthesized by solid-state method. The structure, particle size, surface morphology and electrochemical properties of these cathode active materials were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), electrochemical model cell and cyclic voltammograms (CV). The results indicated that the different atom ratio of Mn/Fe affected its electrochemical preformance. A lithium battery using LiMn0.6Fe0.4PO4 as the active materials of the positive electrode exhibits a high initial charge capacity and discharge capacity of 141.5 mAh g-1 and 125.7 mAh g-1, respectively, and the initial coulombic efficiency is 88.8%. After 25 cycles, it retains 99.8% of the initial discharge capacity at 0.2C rate, showing perfect cyclic property.

Preparationand structure and optical-electrical properties of the Nb/SnO2 composite thin film

Zeng Le-Gui, Liu Fa-Min, Zhong Wen-Wu, Ding Peng, Cai Lu-Gang, Zhou Chuan-Cang
Acta Physica Sinica. 2011, 60 (3): 038203 doi: 10.7498/aps.60.038203
Full Text: [PDF 1575 KB] Download:(801)
Show Abstract
The Nb/SnO2 composite thin films were successfully synthesized by sol-gel spin-coating method on glass substrate. The structures and properties of Nb/SnO2 composite thin films were characterized by X-ray diffraction (XRD), scanning electron microscopey (SEM), ultraviolet visible near-infrared spectrophotometry and four-probe method. The effects of Nb doping on structure and optical-electrical properties of the Nb/SnO2 composite thin films were researched. The results indicate that a tetragonal rutile structure is retained when the Nb content is less than 0.99at%, and the nano-particles are distributed homogeneously in the thin films and their size can be controlled in the range of 5—7 nm. The resistivity of Nb/SnO2 composite thin films decreases and then increases when the Nb content is less than 0.99at%, and reaches a very low value of 9.49×10-2 Ω ·cm at 0.37at% Nb. In the range of 400—700 nm visible region, the transmittance of Nb/SnO2 composite thin films is up to 90% when the Nb content is less than 0.99at%, and the optical band gap of Nb/SnO2 composite thin films are in the range of 3.9—4.1 eV. The visible light transmittance of Nb/SnO2 composite thin films significantly reduce at 1.23at% Nb.

Influence of the thickness and cathode material on the performance of the polymer solar cell

Yu Huang-Zhong, Wen Yuan-Xin
Acta Physica Sinica. 2011, 60 (3): 038401 doi: 10.7498/aps.60.038401
Full Text: [PDF 1194 KB] Download:(717)
Show Abstract
The solar cells based on the blend of MEH-PPV(poly(2-methoxy-5-(2'-ethylhexyloxy) -1,4-phenylene vinylene)) and PCBM (1-(3-methoxycarbonyl)-propyl-1-1-phenyl-(6,6)C61) as acceptor were fabricated. The thickness dependence of the performance of solar cells was studied. The results showed that the solar cells with active layer thickness of 100 nm have the best performance. Increasing device thickness resulted in an increase of charge recombination and a lowering of the fill factor, which leads to lower overall power conversion efficiency. The reasons for the S-shaped kink in the thick device were also analyzed. Influence of the cathode material on the performance of the devices was discussed. The results showed that the solar cells using LiF/Al as the negative electrode formed ohmic contacts at the cathode and anode, which favored the collecting of the charge, increased the transmission of the charge and the absorption of solar light, and improved the performance of the solar cell.

Fabrication of superconducting nanowiresingle-photon detector

Zhang La-Bao, Kang Lin, Chen Jian, Zhao Qing-Yuan, Jia Tao, Xu Wei-Wei, Cao Chun-Hai, Jin Biao-Bing, Wu Pei-Heng
Acta Physica Sinica. 2011, 60 (3): 038501 doi: 10.7498/aps.60.038501
Full Text: [PDF 2386 KB] Download:(1567)
Show Abstract
In this paper,the fabrication details and optimization of micro-fabrication process are presented for developing superconducting nanowire single-photon detectors (SNSPD). Besides,the device failure analysis is also introduced. With those methods,we successfully fabricated high-quality SNSPDs whose maximum system efficiencies were up to 30% for 660 nm wavelength and 4.2% for 1550 nm wavelength according to the single-photon detection experiment. At the dark count rate of 10 c/s,the detection efficiencies were 20% (660 nm) and 3% (1550 nm) with the SNSPD fabricated with above mentioned methods.

Study of evaporation properties of a nano-particle carbonate cathode

Wang Qi-Fu, Wang Xiao-Xia, Luo Ji-Run
Acta Physica Sinica. 2011, 60 (3): 038502 doi: 10.7498/aps.60.038502
Full Text: [PDF 1216 KB] Download:(600)
Show Abstract
Time-of-flight mass spectroscopy and quartz crystal oscillator are used to analyze the evaporation properties of the reservoir oxide cathode coated nano-particle carbonates in decomposing and activating process at different temperatures. The results show that the purity of the reservoir oxide cathode is high. It can fully be decomposed and activated in the conventional technologic process with more freed Ba and lower evaporation rate, compared with the conventional reservoir oxide cathode.

Emergence of local structures in complex network:common neighborhood drives the network evolution Hot!

Cui Ai-Xiang, Fu Yan, Shang Ming-Sheng, Chen Duan-Bing, Zhou Tao
Acta Physica Sinica. 2011, 60 (3): 038901 doi: 10.7498/aps.60.038901
Full Text: [PDF 1251 KB] Download:(3582)
Show Abstract
After extensive study on the small-world and scale-free properties of networks, the research focus is shifting to detailed local structures. Empirical analysis shows that many real networks exhibit the power-law clique-degree distribution. This general regularity cannot be produced by the rich-get-richer mechanism. In this paper, we propose a common-neighborhood-dirven model in which the observed power-law clique-degree distribution con be well reproduced, indicating that the common-neighborhood-dirven mechanism is an essential factor leading to the emergence of local structures.
GENERAL

Lie symmetry and Hojman conserved quantity of Nielsen equation in a dynamical system of the relative motion

Xie Yin-Li, Jia Li-Qun, Yang Xin-Fang
Acta Physica Sinica. 2011, 60 (3): 030201 doi: 10.7498/aps.60.030201
Full Text: [PDF 1095 KB] Download:(1314)
Show Abstract
Lie symmetry and Hojman conserved quantity for Nielsen equations in a dynamical system of the relative motion are investigated. The definition and the criterion of Lie symmetry of Nielsen equations in a dynamical system of the relative motion under the infinitesimal transformations of groups are given. The expressions of the determining equation of Lie symmetry of Nielsen equations and Hojman conserved quantity deduced directly from Lie symmetry in a dynamical system of the relative motion are obtained. An example is given to illustrate the application of the results.

Consensus problem of coupled autonomousagents with time delays

Liu Cheng-Lin, Liu Fei
Acta Physica Sinica. 2011, 60 (3): 030202 doi: 10.7498/aps.60.030202
Full Text: [PDF 1190 KB] Download:(909)
Show Abstract
Coupled consensus problem of multiple autonomous agents with communication delay and input delay is investigated. Based on the frequency-domain analysis,sufficient conditions for the first-order and second-order agents are obtained respectively. The conditions are dependent on the input delay,the communication delay and the control parameters. Simulations illustrate the correctness of the results.

The solution for a class of nonlinear solitary waves in dusty plasma

Mo Jia-Qi
Acta Physica Sinica. 2011, 60 (3): 030203 doi: 10.7498/aps.60.030203
Full Text: [PDF 1092 KB] Download:(1107)
Show Abstract
A class of nonlinear solitary waves in dusty plasma is considered. Firstly, a variational iteration is constructed. Then the initial approximate solution is determined. Finally, using the method of the variational iteration, each degree approximation for corresponding model is found.

Perturbed solution for a class of ENSOdelayed sea-air oscillator

Zhu Min, Lin Wan-Tao, Lin Yi-Hua, Mo Jia-Qi
Acta Physica Sinica. 2011, 60 (3): 030204 doi: 10.7498/aps.60.030204
Full Text: [PDF 1109 KB] Download:(792)
Show Abstract
A class of delayed oscillator of El Nio-Southern Oscillation (ENSO) coupling systems is considered. Using the delayed theory, perturbation and other methods, the asymptotic expansion of the solution for ENSO model is obtained and the asymptotic behavior of solution for the corresponding problem is studied.

The periodic solutions of a delayed sea-air oscillator coupling model for the ENSO

Wang Wen, Xu Yan, Lu Shi-Ping
Acta Physica Sinica. 2011, 60 (3): 030205 doi: 10.7498/aps.60.030205
Full Text: [PDF 1092 KB] Download:(822)
Show Abstract
Using Mawhin's continuation theorem, the existence of periodic solutions for a class of nonlinear problem are first discussed, and then by using it, the problem of periodic solutions for a delayed sea-air oscillator coupling model for the ENSO is investigated. A new result on the existence of periodic solutions to the model is obtained.

A heterogeneous computing algorithm for two-dimensional unstable manifolds of time-continuous systems

Li Qing-Du, Tan Yu-Ling, Yang Fang-Yan
Acta Physica Sinica. 2011, 60 (3): 030206 doi: 10.7498/aps.60.030206
Full Text: [PDF 1360 KB] Download:(860)
Show Abstract
Two-dimensional manifolds usually contain many nonlinear behaviors in complicate structures, which implies that much numerical calculation must be done during computing. Therefore, how to accomplish the work efficiently is a key problem. Since today’s computers tend to heterogeneous platforms including multi-core CPUs and general purpose GPUs, this paper proposes a fast manifold computing algorithm, which is not only of high precision and versatility, but also very suited to the new generation of computers. The algorithm contains two kinds of computation: extending trajectories and generating triangles. The former is large and simple, which is suitable for GPU; the later is small and complicate, which is suitable for CPU. The computation for the stable manifold of the Lorenz system at the origin shows that this algorithm ensures the best performance of heterogeneous platforms and improve the computing speed greatly.

Approximate solution to Sinh-Gordon equation via the homotopy analysis method

Ye Wang-Chuan, Li Biao, Wang Jia
Acta Physica Sinica. 2011, 60 (3): 030207 doi: 10.7498/aps.60.030207
Full Text: [PDF 1129 KB] Download:(726)
Show Abstract
In this paper, approximate solution of the Sinh-Gordon equation is obtained via the homotopy analysis method. The obtained solution contains an auxiliary parameter which provides a convenient way to control the convergence region and rate of the series solutions.

FDTD numerical simulation of the trapping force of microspherein single optical tweezers

Hu Geng-Jun, Li Jing, Long Qian, Tao Tao, Zhang Gong-Xuan, Wu Xiao-Ping
Acta Physica Sinica. 2011, 60 (3): 030301 doi: 10.7498/aps.60.030301
Full Text: [PDF 1305 KB] Download:(1485)
Show Abstract
In this paper the model of trapping force on microsphere near focus in single optical tweezers is built by three dimensional finite-difference time-domain (FDTD) and Maxwell stress tensor methods. Fifth order Gaussian beam based on spherical vector wave function (VSWF) is adopted as simulation light source; the correct light field transmission is obtained. The influences of the wavelength, waist and polarization of light sources, the radius and refractive index of the microsphere on the optical trapping force are discussed. The influence of nearby microsphere and beam polarization on the trapping force of the trapped microsphere in single optical tweezers is analyzed. The effect of beam polarization working on the trapping force of the trapped microsphere is specially analyzed. As results of simulation, the trapping force acting on the microsphere by the circularly polarized beam is larger than that by the linearly polarized beam. The stability of the trapped microsphere in single optical tweezers will be disturbed by the nearby microsphere and lose its balance. Varying the beam polarization will lead to the change of the trapping force of the trapped microsphere.

A new three-mode entangled state representation generated by beamsplitter and polarizer

Wang Shu-Jing, Ma Shan-Jun
Acta Physica Sinica. 2011, 60 (3): 030302 doi: 10.7498/aps.60.030302
Full Text: [PDF 1122 KB] Download:(884)
Show Abstract
We constructed a new three-mode entangled state representation in the three-mode Fock space, which is complete and can make up a new quantum representation. This state can be generated experimentally by combining beamsplitter with polarizer. The entanglement properties are analyzed by obtaining its Schmidt decomposition. As an important application of this state, we consider a single-mode state teleportation by using this new state as a quantum channel, and present the corresponding teleportation scheme.

The effect of Dzyaloshinskii-Moriya interaction on entanglement in one-dimensional XY spin model

Liu Sheng-Xin, Li Sha-Sha, Kong Xiang-Mu
Acta Physica Sinica. 2011, 60 (3): 030303 doi: 10.7498/aps.60.030303
Full Text: [PDF 1321 KB] Download:(877)
Show Abstract
The effects of Dzyaloshinskii-Moriya (DM) interaction on the thermal entanglement of mixed-spin XY chain (1/2,3/2) and spin 1 XY chain are investigated through negativity. By calculating the entanglement between two particles, it was found that the DM interaction can not only increase the entanglement, but also make the entanglement of the particles reach a stationary value. The higher the temperature, the greater the DM interaction is required to make the thermal entanglement arrive at this stationary value. Under the same condition, the entanglement between two spin 1 particles is less than that between mixed-spin. The exchange-coupling interactions between the spins are helpful to strengthen the thermal entanglement, hence the exchange-coupling can be used to modulate the entanglement along with the DM interaction. When the exchange-coupling interaction is small, one can enlarge the DM interaction to increase the entanglement, whereas, when the DM interaction is small, one can increase the thermal entanglement through increasing the exchange-coupling interaction.

Performance analysis of decoy state quantum key distribution using two kinds of photon sources

Wang Han, Yan Lian-Shan, Pan Wei, Luo Bin, Guo Zhen, Xu Ming-Feng
Acta Physica Sinica. 2011, 60 (3): 030304 doi: 10.7498/aps.60.030304
Full Text: [PDF 1134 KB] Download:(746)
Show Abstract
Since the single photon is easy to attenuate and be disturbed, its key generation rate and transmission distance in quantum communication systems are generally limited. In contrast, weak coherent pulse (WCP) and heralded single photon source (HSPS) exhibit higher feasibility than the single photon source in quantum key distributions (QKD). We compare the performances of QKD using these two kinds of photon sources and decoy state method, incorporating data-postprocessing methods including the Lütkenhaus scheme and Gottesman-Lo-Lütkenhaus- Preskill (GLLP) scheme. Simulation results indicate that QKD using HSPS can transmit longer distance than using WCP with lower overall quantum bit error rate (QBER) at the same transmission distance, albeit with relatively low key generation rate.

Research of secure two-party quantum comparing protocol

Liu Wen, Wang Yong-Bin
Acta Physica Sinica. 2011, 60 (3): 030305 doi: 10.7498/aps.60.030305
Full Text: [PDF 1191 KB] Download:(989)
Show Abstract
Secure two-party comparing problem is used to compare two private integer without further leaking of information. But in case of the quantum computer the currently available solutions become useless. A secure two-party quantum comparing protocol in semi-honest model is presented based on the a quantum implicit module n+1 addition. The security of the protocol is analyzed.

Feedback sum-product decoding of sparse quantum codes for X-Z Pauli channels

Wang Yun-Jiang, Bai Bao-Ming, Peng Jin-Ye, Wang Xin-Mei
Acta Physica Sinica. 2011, 60 (3): 030306 doi: 10.7498/aps.60.030306
Full Text: [PDF 1215 KB] Download:(3422)
Show Abstract
In this paper, a feedback sum-product decoding algorithm of sparse quantum codes for X-Z Pauli channels is developed. Compared with the previous decoding algorithm, our feedback strategy exploits not just the syndrome but also the values of the frustrated checks on individual qubits of the code and the character of the channel model with the portion of each error to adjust the probability distribution of information nodes. Due to the smart adjustment, our decoding algorithm, on one hand, can break the symmetric degeneracy, and on the other hand, can feed back more useful information to the SPA decoder to help the decoder determine a valid output, thereby significantly improving the decoding ability of the decoder. Moreover, our algorithm, which is based on GF(4), overcomes the limitation caused by decoding in GF(2). Finally, we want to point out that, our method does not increase the measurement overhead in comparison wioth the previous methods, as the extra information comes for free from the requisite stabilizer measurement.

Optimization criterion of potential for trappedweakly interacting Bose gas

Yuan Du-Qi
Acta Physica Sinica. 2011, 60 (3): 030307 doi: 10.7498/aps.60.030307
Full Text: [PDF 1103 KB] Download:(745)
Show Abstract
Based on Bose-Einstein condensation in minimized momentum state, the optimization criterion of potential is studied for trapped weakly interacting Bose gas according to Thomas-Fermi approximation. A criterion for the validity of potential and the limited atom number loaded in a power law attractive potential well for ultra-cold weakly interacting Bose atom gas is derived. The criterion gives the required potential field strength when the loaded atom number is fixed, or the limited atom number when the potential field strength is given, and then, the best ranges of potential field strength are obtained, for attractive interaction and repulsive interaction, respectively.

Analytical analysis of periodic solution and its stability in Josephson junction

Zhang Li-Sen, Cai Li, Feng Chao-Wen
Acta Physica Sinica. 2011, 60 (3): 030308 doi: 10.7498/aps.60.030308
Full Text: [PDF 1202 KB] Download:(835)
Show Abstract
Analytical expressions of periodic solutions in rf-biased resistively-capacitively-shunted Josephson junction were derived by incremental harmonic balance method, and the stability of the periodic solutions was investigated using Floquet theory. We fownd that while the system is in stable periodic states, plentiful unstable periodic orbits still exist in the system. Critical parameter values for which the stable periodic solutions of the system lose their stability are obtained and the type of bifurcation is determined by computing the Floquet multipliers. We have also theoretically confirmed the period-doubling-route to chaos with increasing amplitude of driving current, which acts as the control parameter in the system. The results from analytical analysis coincide with that from numerical simulation.

The numerical study on the effect of the earlyafterdepolarization on spiral wavesin discrete excitable media

Wei Hai-Ming, Tang Guo-Ning
Acta Physica Sinica. 2011, 60 (3): 030501 doi: 10.7498/aps.60.030501
Full Text: [PDF 1548 KB] Download:(887)
Show Abstract
The early afterdepolarization (EAP) behavior is introduced into the Greeberg-Hasting model of discrete excitable medium through considering that some of the refractory states can be excited. The effect of the EAP on spiral wave is studied. The numerical results show that the EAP has significant influences on spiral waves when the related parameters are suitably chosen. These influences include that the EAP causes spiral wave drifting and meandering,and spiral breakup. The pattern of spiral wave is distorted. The spiral wave varies alternately between those with thick and thin arms. The period of spiral wave alters alternately between two values. The EAP induces the transition from stable spiral wave to breathing spiral wave or antispiral wave. When the excitation threshold of refractory states is very high,the EAP has no affect on the spiral wave. The EAP induced phenomena are briefly discussed.

The Logistic-Unified hybrid chaotic system

Liu Yang-Zheng, Lin Chang-Sheng, Li Xin-Chao, Liu Hai-Peng, Wang Zhong-Lin
Acta Physica Sinica. 2011, 60 (3): 030502 doi: 10.7498/aps.60.030502
Full Text: [PDF 1935 KB] Download:(914)
Show Abstract
A Logistic-Unified hybrid chaotic system is generated. In this system, following the random changing of the state variable values of the Logistic map, the parameter values of the Unified system can be modulated randomly, and the Logistic-Unified hybrid chaotic system can be switched between the generalized Lorenz system, Lü system and generalized Chen system randomly. The extremely complicated chaotic signal is generated via the Logistic-Unified hybrid chaotic system. The Logistic-Unified hybrid chaotic system is realized based on digital signal processing (DSP). Hardware experiments and software simulation are completely consistent, and the results demonstrate the validily of the theoretical analysis.

A novel three-dimensional autonomous chaotic system

Feng Chao-Wen, Cai Li, Kang Qiang, Zhang Li-Sen
Acta Physica Sinica. 2011, 60 (3): 030503 doi: 10.7498/aps.60.030503
Full Text: [PDF 1591 KB] Download:(1154)
Show Abstract
Based on the study of Chua’s circuit, a novel chaotic system is reported. Basic dynamical properties of the new system are further investigated via theoretical analysis and numerical simulation, including Lyapunov exponent, Lyapunov dimension, portrait diagrams, Lyapunov exponent spectrum, bifurcation diagrams, Poincaré mapping and power spectrum. Finally, an electronic circuit is designed by the Orcad-PSpice softeware to implement the new system. The investigation results show that the new chaotic system has broad parameter regions, an maximum Lyapunov exponent approaching one, and is not topologically equivalent to Chua’s circuit. It also shows a good agreement between numerical simulation and circuit experimental simulation, which proves the existence and physical realizability of the new chaotic system.

Anti-synchronization of different hyperchaotic systems based on adaptive active control and fractional sliding mode control

Liu Fu-Cai, Li Jun-Yi, Zang Xiu-Feng
Acta Physica Sinica. 2011, 60 (3): 030504 doi: 10.7498/aps.60.030504
Full Text: [PDF 1356 KB] Download:(1025)
Show Abstract
Taking hyperchaotic Chen system and hyperchaotic Lorenz system as examples, we study the anti-synchronization of hyperchaotic systems with slow time-varying parameters. Firstly, taking advantage of active control concept, the non-linear parts of hyperchaotic systems are eliminated, and then based on Lyapunov stability theory, a kind of parameter adaptive control law is selected reasonably to achieve anti-synchronization of two hyperchaotic systems, which is a good solution to the time-varying parameters perturbation problem. Furthermore, hyperchaotic systems of different parameters with fractional order are studied via sliding mode control,which is proved to be valid theoretically. Numerical simulation experiments verify the effectiveness and feasibility of the proposed method.

Observer synchronization method for a class of perturbed chaotic systems with unknown parameters

Li Xiu-Chun, Gu Jian-Hua, Wang Yun-Lan, Zhao Tian-Hai
Acta Physica Sinica. 2011, 60 (3): 030505 doi: 10.7498/aps.60.030505
Full Text: [PDF 1344 KB] Download:(831)
Show Abstract
Combining the observer and adaptive method, chaos synchronization is realized for a class of the perturbed chaotic systems with unknown parameters. Lyapunov stability theory and Barbalat lemma are adopted to design observer for achieving chaos synchronization. This method has fewer constraints and can be applied to many chaotic systems. Numerical simulations of representative chaotic systems further verify the validity of the proposed method.

Projective synchronization of a weighted network in a laser spatiotemporal chaos model

Lü Ling, Meng Le, Guo Li, Zou Jia-Rui, Yang Ming
Acta Physica Sinica. 2011, 60 (3): 030506 doi: 10.7498/aps.60.030506
Full Text: [PDF 1472 KB] Download:(810)
Show Abstract
A method is introduced to realize spatiotemporal chaos projective synchronization for a weighted network. The coupling function between connected nodes of the weighted network is derived and the range of the linear coefficient matrix of separated configuration in state equation of the node is obtained through constructing an appropriate Lyapunov function. Each node of the weight network is a laser spatiotemporal chaos model in which Bragg acousto-optical bistable system and unilateral coupled map lattices are taken as the local function and the spatial extended system, respectively. The projective synchronization effect of the weighted network is checked by numerical emulation. The results show that projective synchronization can be realized even if the coupling strength between the nodes are given arbitrary weight values.

Mechanism of polyalcohol solid—solid phase change

Wang Xiao-Wu, Xu Hai-Hong
Acta Physica Sinica. 2011, 60 (3): 030507 doi: 10.7498/aps.60.030507
Full Text: [PDF 1086 KB] Download:(746)
Show Abstract
Many polyalcohols will change from one crystal structure to another at certain temperatures. A lot of works had reported their phase change enthalpy, phase change temperature and phase diagram. It is taken that their phase change enthalpy must be related to their hydrogen bond. This article investigated quantitatively the relation between phase change enthalpy and hydrogen bond of NPG (neopentylglycol), PG (pentaglycerino) and PE (pentaerythritol) on the basis of infrared spectrum experimental data and calorimetric results. It was shown that before phase change, all the —OH are associated and as a result NPG, PG and PE form layer structure. After phase change, NPG, PG and PE move along the layer and as a result some hadrogen bonds break. Therefore the phase change enthalpy equals the energy used to break hydrogen plus the energy used to increase the vibration frequency of other still associated —OH.

ADRC and CMAC combined optimization and control for a class of discrete-time uncertain chaotic systems

Liu Zhao-Hua, Zhang Jing, Zhang Ying-Jie, Li Xiao-Hua, Wu Jian-Hui
Acta Physica Sinica. 2011, 60 (3): 030701 doi: 10.7498/aps.60.030701
Full Text: [PDF 1415 KB] Download:(922)
Show Abstract
Immune dynamic particle swarm optimization (IDPSO) strategy integrated with active disturbance rejection control (ADRC) and cerebellar model articulation controller (CMAC) combined control is designed for uncertain nonlinear discrete-time chaotic systems. The ADRC-CMAC is comprised of a cerebellar model articulation controller (CMAC) and an ADRC controller. The ADRC controller is designed to guarantee the stability of the system and restrict the disturbance. The CMAC is used to guarantee the control precision and response speed. Immune binary-state particle swarm algorithm is used to tune online the parameters of the ADRC-CMAC. Simulation results of uncertain nonlinear discrete-time systems demonstrate that performance with favorable response speed and restrained disturbance can be achieved by using the proposed control system.

Analysis and design of semiconductor detector for high-power terahertz pulse

Wang Guang-Qiang, Wang Jian-Guo, Tong Chang-Jiang, Li Xiao-Ze, Wang Xue-Feng
Acta Physica Sinica. 2011, 60 (3): 030702 doi: 10.7498/aps.60.030702
Full Text: [PDF 1256 KB] Download:(989)
Show Abstract
A 0.14 THz high-power terahertz pulse detector based on hot electron effect in semiconductors is designed in this paper. First, the working principle of the detector is analyzed and its relative sensitivity is derived according to the structural characteristics of the detector. Then a three-dimensional finite-difference time-domain method is used to simulate the voltage standing wave ratio (VSWR) and relative sensitivity in a linear region. With optimized structural parameters, the VSWR of the designed detector is less than 1.3 while the relative sensitivity is about 0.6 kW-1, fluctuating no more than 10% in a frequency range of 0.13—0.16 THz. Subsequently discussed are the effect of Joule heat on the detector, and the relation between variation ratio of the output voltage and terahertz pulse duration. Finally the detecting simulations of the detector and its analysis results show that the detector with response time of picosecond-leval can handle a maximum power of about 2.2 kW, while the maximum power of its linear working region reaches tens of watts, so it can accomplish the direct measuring of 0.14 THz high-power terahertz pulses with nanosecond-level durations, increasing the accuracy of power measurement.
THE PHYSICS OF ELEMENTARY PARTICLES AND FIELDS

The antiferromagnetic Heisenberg model after a suddenly switched-on interaction

Zhou Zong-Li, Zhang Guo-Shun, Lou Ping
Acta Physica Sinica. 2011, 60 (3): 031101 doi: 10.7498/aps.60.031101
Full Text: [PDF 1129 KB] Download:(903)
Show Abstract
Based on the Heisenberg model, the anti-ferromagnet following the interaction suddenly switched-on at t=0 is considered in this paper. In the limit of low temperature, the time evolution of observables is analytically studied by utilizing the flow equation method. According to the unique feature of the system, the way to obtain the evolution of observables is shown and applied to the system we focused on. Further, special emphasis is laid on the application of the flow equation method to non-equilibrium magnetic systems so that the validity of the method applied to this kind of systems is traced. By means of this method, the evolution of magnetization of the ground state is traced in detail. It is found that the magnetization oscillates with time rather than converges,which is different from that of non-equilibrium Luttinger liquids.
NUCLEAR PHYSICS

Investigation on inert gases transport processin plutonium aerosol

Wu Huai-Long, Tian Dong-Feng, Hao Fan-Hua, Gong Jian
Acta Physica Sinica. 2011, 60 (3): 032801 doi: 10.7498/aps.60.032801
Full Text: [PDF 1109 KB] Download:(866)
Show Abstract
It is a key aspect to study security of radioactivity gas in reactor circulation. It is necessary to study the transport process of radioactivity inert gases krypton in plutonium aerosol environment after fission occurrence. The experimental data of Kr87 and Kr88 were analyzed. According to the physical propertics of the two different sources,Kr87/Kr88 ratio variety law was analyzed at different sampling times. The physiced picture and model of transport process in plutonium aerosol environment were established by comparing with experimental data.

Molecular dynamics simulation for the impact of hydrazineon the water of pressurized water reactors

Fan Yong-Sheng, Chen Xu, Zhou Wei, Shi Shun-Ping, Li Yong
Acta Physica Sinica. 2011, 60 (3): 032802 doi: 10.7498/aps.60.032802
Full Text: [PDF 1184 KB] Download:(709)
Show Abstract
In this paper, we used molecular dynamics to simulate dynamic properties and micro-structure of the water-hydrazine particle system under various conditions:chamber condition of 1 atm, 298 K; pressurized water reactor (PWR) environment of 155 atm, 626 K; with number of water molecules of 256, numbers of hydrazine (N2H4) molecules of 0, 25, 50 and 75. And we have also explored the impact on the dissolved oxygen in water when hydrazine molecule is added to the system. The simulation results show that in the chamber ambient, when the number of molecules of hydrazine varies from 0 to 25, 50 and 75, the mean square displacement (MSD) in the particle system will increase with the number of particles of the hydrazine. The MSD for hydrazine molecule of number 0 will be ten less than that of 25, 50 and 75. Under the PWR environment, with hydrazine molecule number of 50, the MSD is about 4 times higher than that in chamber ambient. At the same time, under such condition, the MSD of particle system does not increase with the number of hydrazine molecules. The MSD with hydrazine molecule of 50 is higher than its counterpart with the number of molecules of 25 or 75. In addition, the micro-structure of particle systems, from the perspective of the radial distribution functions (RDF), will increase with the increase of concentration of hydrazine in chamber ambient. This conclusion goes along with the fact that hydrazine is easy to react with water to generate hydrazine hydrate. While in the pressurized water reactor environment, the radial distributions of the water with the number of hydrazine molecules of 25, 50 and 0 will have no big change. But the radial distributions with the number of hydrazine molecules of 75 increase significantly. It can be seen from simulation data that hydrazine added to PWR significantly inhibits the dissolved oxygen in water, but the inhibition does not increase in proportion to the increase of the concentration of hydrazine. This phenomenon and its causes are revealed comprehensively in this paper.

Response function and relative efficiency measurementsof the BC501A scintillator by usinga 252Cf fast fission chamber

Yan Jie, Li Cheng, Liu Rong, Jiang Li, Lu Xin-Xin, Wang Mei
Acta Physica Sinica. 2011, 60 (3): 032901 doi: 10.7498/aps.60.032901
Full Text: [PDF 1366 KB] Download:(853)
Show Abstract
The response function and relative efficiency of a Φ50.8 mm×50.8 mm BC501A scintillator has been measured by using a252Cf fast fission chamber. In this method,a multi-parameter data acquisition system is employed to take the time-of-flight (TOF),pulse shape discrimination (PSD) and recoil energy (RE. note: fission neutron induces recoil proton while the prompt gamma ray induces Compton recoil electron) of the fission neutron and prompt gamma ray in an event-by-event mode with a TOF gate. The off-line data analysis method for separating the prompt gamma ray from the fission neutron as well as its contribution to the TOF spectrum and RE spectrum to obtain the relative efficiency and response function is discussed in detail. An accurate calibration of the effective neutron detection threshold is carried out by a linear extrapolation of the section around the point of inflexion in the relative efficiency plots using neutron energy directly. The relative efficiency with 0.51 MeV effective neutron detection threshold agrees with the Monte Carlo calculation result of NEFF. The response function from 0.5 MeV to 5 MeV generally agrees with the published experimental result of the NE213 scintillator of the same size.
ATOMIC AND MOLECULAR PHYSICS

Density functional theory study on the structure and electronicproperties of Aun Sc3 (n =1—7) clusters

Ge Gui-Xian, Yan Hong-Xia, Jing Qun, Zhang Jian-Jun
Acta Physica Sinica. 2011, 60 (3): 033101 doi: 10.7498/aps.60.033101
Full Text: [PDF 1482 KB] Download:(812)
Show Abstract
Geometric structures of Aun Sc3 (n=1—7) clusters are optimized by using the generalized gradient approximation (GGA) density functional theory. Energy, vibrational frequency and electronic properties have been calculated. The 3D structure of AunSc appears earlier than that of Aun. The triangle bipyramid structure of Au2Sc3 is a building block for larger AunSc3 of n≤7. Furthermore, the investigation on the second-order difference shows that the clusters with even Au atoms have enhanced stabilities, which may be due to the electron shell effects.

The research of motorial characteristic of sodiumatoms in standing wave field

Zhang Wen-Tao, Zhu Bao-Hua, Xiong Xian-Ming
Acta Physica Sinica. 2011, 60 (3): 033201 doi: 10.7498/aps.60.033201
Full Text: [PDF 1324 KB] Download:(769)
Show Abstract
Direct write atom lithography is a new technique in which resonant light is used to pattern an atomic beam and the nanostructures are formed when the atoms deposit on the substrate. The motion of sodium atoms in standing wave filed is discussed. Based on the semi-classical model, this paper analyses the motion equation of sodium atom in the laser standing wave field, and then gets the trajectory of the atoms in the standing wave field by analytical simulation for different longitudinal and transverse velocities. The simulative results show that the FWHM width of stripes was 2.78 nm and the contrast was 38.5 ∶1 for the optimal longitudinal velocity, while that of the stripes was 29.1 nm and the contrast was 15 ∶1 for non-optimal longitudinal velocities. At the same time, the results show that the FWHM width of stripes was 4.2 nm and the contrast was 20 ∶1 when the divergence of atomic beam was 0.15 mrad. Whereas, the stripes presented Multi-peaked configuration and the quality deteriorated with the divergence of atomic beam increased to 1.5 mrad.

Isolated intense 39 attosecond pulse generatedby adding a harmonic pulse

Chen Ji-Gen, Yang Yu-Jun, Chen Yang
Acta Physica Sinica. 2011, 60 (3): 033202 doi: 10.7498/aps.60.033202
Full Text: [PDF 1211 KB] Download:(854)
Show Abstract
A scheme to efficiently generate a broadband short attosecond pulse is presented by using intense multi-cycle 800 nm laser in combination with its 27th harmonic (H27) laser pulse. It is shown that the electronic dynamics can be efficiently controlled by the 1 fs H27 laser. Setting the H27 laser to the multi-cycle 800 nm laser at a proper time, we can control most of the ionizations to occur at half the optical cycle, and the short quantum path can be picked out, thus the harmonic plateau is heightened four orders of magnitude compared with the case of using the fundamental laser alone. Furthermore, a harmonic supercontinuum spectrum with a bandwidth of 108 eV is produced. By superposing the 140th-210th harmonics in the continuous region, an intense isolated pulse with the duration of 39 as is straightforwardly obtained. Using this method, the bandwidth of the continuum spectrum is 2 times wider, the intensity of the attosecond pulse is greater, and the duration of the attosecond pulse is shorter, in contrast to the scheme proposed in Ref. [7], which added the ultraviolet attosecond pulse to a few-cycle 800 nm laser.

The wavelength dependence of high-order harmonic generationand attosecond pulses from atom in infrared laser field

Cheng Chun-Zhi, Zhou Xiao-Xin, Li Peng-Cheng
Acta Physica Sinica. 2011, 60 (3): 033203 doi: 10.7498/aps.60.033203
Full Text: [PDF 1156 KB] Download:(951)
Show Abstract
Basing on the strong-field approximation, we study high harmonic generation of hydrogen atom exposed to the long wavelength infrared laser field, and analyze the wavelength dependence of conversion efficiency of high-order harmonic generation near the cut-off position. It is found that high-order harmonic yield is much lower near cut-off than in the beginning of the plateau of the harmonic generation, but the width of the attosecond pulse is narrowed with increasing wavelength.

Surface enhanced Raman scattering of pyridazine molecule:absorption configuration and enhancementmechanism via bond polarizabilities

Fang Chao, Wu Guo-Zhen
Acta Physica Sinica. 2011, 60 (3): 033301 doi: 10.7498/aps.60.033301
Full Text: [PDF 1195 KB] Download:(702)
Show Abstract
The temporal molecular bond polarizabilities of pyridazine molecule absorbed on Ag electrode were explored from its surface enhanced Raman intensities, showing that the two nitrogen atoms are the absorption sites and the enhancement is dominated by the charge transfer mechanism. The behaviors of the charges on the skeletal bonds were demonstrated under various applied voltages, which shows the conjugation effect. This algorithm is universal for the surface systems as long as their Raman spectra are available.

Prediction of thermophysical properties of pure noble gases

Song Bo, Wang Xiao-Po, Wu Jiang-Tao, Liu Zhi-Gang
Acta Physica Sinica. 2011, 60 (3): 033401 doi: 10.7498/aps.60.033401
Full Text: [PDF 1202 KB] Download:(744)
Show Abstract
The thermophysical properties of pure helium-4, neon, argon, krypton and xenon are calculated using ab initio potentials of kinetic theory over the temperature range from 50 to 5000 K at zero-density, including the second virial coefficient, thermal diffusion coefficient and thermal diffusion factor. Comparing with results obtained by empirical potentials, the results of present work are in better agreement with experimental data and recommended values of REFPROP 8.0.
PHYSICS OF GASES, PLASMAS, AND ELECTRIC DISCHARGES

Phase investigation on relativistic klystron amplifier

Huang Hua, Guo Yan-Hua, Jin Xiao, He Hu, Lei Lu-Rong, Luo Xiong, Chang An-Bi, Li Zheng-Hong
Acta Physica Sinica. 2011, 60 (3): 035201 doi: 10.7498/aps.60.035201
Full Text: [PDF 1408 KB] Download:(671)
Show Abstract
The relevant facts to phase of relativistic klystron amplifier (RKA) are analyzed in this paper. The output microwave phase of RKA relevant to voltage, current, size, rising time and delay time of electron beams is simulated by PIC. It is found that the phase shift of RKA is changed with the voltage, current and size of electron beams. On the contrast, the leading magnetic field, rising time and delay time of electron beams do not change the phase shift of RKA obviously. The phase of RKA is investigated in experiment too. The phase sensitivity of RKA is about 2.6 degrees; the phase shaking of RKA is less than 20 degrees. The experimental results are content well with the simulations.

Generation of attosecond X-ray pulse in the interaction between the pulses and the relativistic electrons

Yan Chun-Yan, Zhang Qiu-Ju, Luo Mu-Hua
Acta Physica Sinica. 2011, 60 (3): 035202 doi: 10.7498/aps.60.035202
Full Text: [PDF 1222 KB] Download:(898)
Show Abstract
The attosecond X-ray pulse which is produced by the interaction between the laser pulse and the relativistic electrons is studied in this paper. The attosecond X-ray pulse is generated by Thomson backscattering from the relativistic electrons. It also discusses the effect of the plasma parameters on the attosecond X-ray. The wavelength of attosecond X-ray pulse becomes shorter when the frequency of the laser or the velocity of the relativistic electrons increases. We obtained the "water window" X-ray by selecting the appropriate laser and plasma parameters. This paper also discusses the effect of relativistic electrons density and density grad on the translation efficiency.

Numerical simulation study on characteristics of gliding arc discharge

Wang Yu, Li Xiao-Dong, Yu Liang, Yan Jian-Hua
Acta Physica Sinica. 2011, 60 (3): 035203 doi: 10.7498/aps.60.035203
Full Text: [PDF 1316 KB] Download:(1149)
Show Abstract
The arc temperature field, electric field and size of conducting zone of gliding arc plasma are important parameters to determine the temperature and density of the electrons, the chemical reaction rates and energy efficiency. Electrical parameters of a 50 Hz ac gliding arc discharge were measured under conditions of two gas flow rates, 1.43 L/min and 6.42 L/min. An instantaneous model which was used to describe the energy transfer of gliding arc discharge was simplified by using an approximate expression for the electrical conductivity and diffusivity of plasma, which ravelled out the moving boundary in the gliding arc simulation resulting from variation of arc structure. The current density, electric field, dynamic temperature field and the structure of ac gliding arc was calculated. The electric field strength from the simulation result of the model was in agreement with the experimental data. According to the calculational result, the temperature on the axis of arc reached as high as 5700—6700 K. It showed the gas flow directly affected the arc structure and current density, thus further affected the electric field strength and temperature distribution. The electric field strength increased firstly and then decreased during a discharge period.
GEOPHYSICS, ASTRONOMY, AND ASTROPHYSICS

Remediation of radiation belt electrons caused by ground based man-made VLF wave

Wang Ping, Wang Huan-Yu, Ma Yu-Qian, Li Xin-Qiao, Lu Hong, Meng Xiang-Cheng, Zhang Ji-Long, Wang Hui, Shi Feng, Xu Yan-Bing, Yu Xiao-Xia, Zhao Xiao-Yun, Wu Feng
Acta Physica Sinica. 2011, 60 (3): 039401 doi: 10.7498/aps.60.039401
Full Text: [PDF 1200 KB] Download:(681)
Show Abstract
The physics mechanisms of radiation belt electrons loss and acceleration are important issues in space physics research. Recently, France Microsatellite DEMETER has discovered the correlation between man-made VLF signals and radiation belt electrons precipitation in the NPM(the U.S. VLF transmitter located at Lualualei) experiment. Our research focuses on the explanation of the relation among affected pitch angle distribution, kinetic energy and position of electrons. This is achieved by calculating the local diffusion coeffcient based on the theory of qusi-linear diffusion with resonant interaction. Our result has a good explanation of radiation belt electron precipitation discovered by DEMETER during NPM experiment. Furthermore, we have discussed the effciency of radiation belt remediation in an artificial way.

Minimum entropy cumulation method of pulsar profile

Zhang Hua, Xu Lu-Ping
Acta Physica Sinica. 2011, 60 (3): 039701 doi: 10.7498/aps.60.039701
Full Text: [PDF 1299 KB] Download:(862)
Show Abstract
To obtain the cumulation profile of pulsar signal, the traditional method needs to identify its period first, and then fold the signal with the period. This method depends on the accuracy of the period, and it has no evaluation standard for the profile. In this paper we analyze the strong correlation between the cumulation profile and the period, and present a minimum entropy method of pulsar cumulation profile and its verification. Therefore this method is applied to the identification of pulsar cycle. The RXTE data and the simulation data are used to verify the effectiveness of the method.
Copyright © Acta Physica Sinica
Address: Institute of Physics, Chinese Academy of Sciences, P. O. Box 603,Beijing 100190 China
Tel: 010-82649294,82649829,82649863   E-mail: aps8@iphy.ac.cn