晶体取向对定向凝固枝晶生长的影响

王贤斌; 林鑫; 王理林; 白贝贝; 王猛; 黄卫东

doi:10.7498/aps.62.108103

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名

邮箱

手机号码

标题

留言内容

验证码

摘要

采用类金属透明模型合金丁二腈-1.0 wt%乙醇(SCN-1.0 wt% Eth)合金, 考察了晶体取向对定向凝固过程中晶粒的平界面失稳孕育时间、枝晶形态演化以及枝晶一次间距的影响. 结果表明, 随着枝晶择优生长方向与温度梯度方向夹角的增大, 晶粒的平界面失稳孕育时间增加, 界面的稳定性增强; 对于不同晶体取向的枝晶形态演化, 枝晶择优生长方向与温度梯度方向夹角越大, 枝晶二次臂不对称生长越严重, 同时, 具有生长优势的枝晶二次臂对相邻枝晶的生长的抑制越强烈; 至于不同晶体取向的枝晶一次间距, 随着枝晶择优生长方向与温度梯度方向夹角的增大, 枝晶一次间距增大.

关键词:

作者及机构信息

1.
西北工业大学, 凝固技术国家重点实验室, 西安 710072

基金项目: 国家重点基础研究发展计划(批准号: 2011CB610402)和国家自然科学基金(批准号: 50971102, 50901061)资助的课题.

参考文献

[1]	Trivedi R, Somboonsuk K 1985 Acta Metall. 33 1061
[2]	Kurz W, Fisher D J 1986 Fundamentals of Solidification (3rd Ed.) (Switzerland: Trans Tech Publications Ltd) p23
[3]	Billia B, Trivedi R 1993 Handbook of Crystal Growth (London: North-Holland) p1007
[4]	Lin X, Li T, Wang L L, Su Y P, Huang W D 2004 Acta Phys. Sin. 53 3971 (in Chinese) [林鑫, 李涛, 王琳琳, 苏云鹏, 黄卫东 2004 物理学报 53 3971]
[5]	Huang W D, Lin X, Li T, Wang L L, Inatomi Y 2004 Acta Phys. Sin. 53 3978 (in Chinese) [黄卫东, 林鑫, 李涛, 王琳琳, Inatomi Y 2004 物理学报 53 3978]
[6]	Suk M J, Park Y M, Kim Y D 2007 Scripta Mater. 57 985
[7]	Kaya H, Cadirli E, Keslioglu K, Marasli N 2005 J. Cryst. Growth 276 583
[8]	Hansen G, Liu S, Lu S Z, Hellawell A 2002 J. Cryst. Growth 234 731
[9]	Laxmanan V 1998 Scipta Mater. 38 1289
[10]	Burden M H, Hunt J D 1974 J. Cryst. Growth 22 99
[11]	Hunt J D 1979 Solidification and Casting of Metals (London: Metals Society) p35
[12]	Kurz W, Fisher D J 1981 Acta Metall. 29 11
[13]	Trivedi R 1984 Metall. Trans. A 15 977
[14]	Wang L L, Wang X B, Wang H Y, Lin X, Huang W D 2012 Acta Phys. Sin. 61 148104 (in Chinese) [王理林, 王贤斌, 王红艳, 林鑫, 黄卫东 2012 物理学报 61 148104]
[15]	Utter B, Bodenschatz E 2002 Phys. Rev. E 66 051604
[16]	Grugel R N, Zhou Y 1989 Metall. Trans. A 20A 969
[17]	Gandin C A, Eshelman M, Trivedi R 1996 Metall. Mater. Trans. A 27A 2727
[18]	Deschamps J, Georgelin M, Pocheau A 2006 Europhys. Lett. 76 291
[19]	Pocheau A, Deschamps J, Georgelin M 2007JOM 59 71
[20]	Wang Z J, Wang J C, Yang G C 2009 Phys. Rev. E 80 052603
[21]	Wang Z J, Li J J, Wang J C 2011 J. Cryst. Growth 328 108
[22]	Yang C B, Liu L, Zhao X B, Liu G, Zhang J, Fu H Z 2011 Acta Metall. Sin. 47 1246 (in Chinese) [杨初斌, 刘林, 赵新宝, 刘刚, 张军, 傅恒志 2011 金属学报 47 1246]
[23]	Muschol M, Liu D, Cummins H Z 1992 Phys. Rev. A 46 1038
[24]	Trivedi R, Kurz W 1994 Acta Metall. Mater. 42 15

施引文献

[1]	Trivedi R, Somboonsuk K 1985 Acta Metall. 33 1061
[2]	Kurz W, Fisher D J 1986 Fundamentals of Solidification (3rd Ed.) (Switzerland: Trans Tech Publications Ltd) p23
[3]	Billia B, Trivedi R 1993 Handbook of Crystal Growth (London: North-Holland) p1007
[4]	Lin X, Li T, Wang L L, Su Y P, Huang W D 2004 Acta Phys. Sin. 53 3971 (in Chinese) [林鑫, 李涛, 王琳琳, 苏云鹏, 黄卫东 2004 物理学报 53 3971]
[5]	Huang W D, Lin X, Li T, Wang L L, Inatomi Y 2004 Acta Phys. Sin. 53 3978 (in Chinese) [黄卫东, 林鑫, 李涛, 王琳琳, Inatomi Y 2004 物理学报 53 3978]
[6]	Suk M J, Park Y M, Kim Y D 2007 Scripta Mater. 57 985
[7]	Kaya H, Cadirli E, Keslioglu K, Marasli N 2005 J. Cryst. Growth 276 583
[8]	Hansen G, Liu S, Lu S Z, Hellawell A 2002 J. Cryst. Growth 234 731
[9]	Laxmanan V 1998 Scipta Mater. 38 1289
[10]	Burden M H, Hunt J D 1974 J. Cryst. Growth 22 99
[11]	Hunt J D 1979 Solidification and Casting of Metals (London: Metals Society) p35
[12]	Kurz W, Fisher D J 1981 Acta Metall. 29 11
[13]	Trivedi R 1984 Metall. Trans. A 15 977
[14]	Wang L L, Wang X B, Wang H Y, Lin X, Huang W D 2012 Acta Phys. Sin. 61 148104 (in Chinese) [王理林, 王贤斌, 王红艳, 林鑫, 黄卫东 2012 物理学报 61 148104]
[15]	Utter B, Bodenschatz E 2002 Phys. Rev. E 66 051604
[16]	Grugel R N, Zhou Y 1989 Metall. Trans. A 20A 969
[17]	Gandin C A, Eshelman M, Trivedi R 1996 Metall. Mater. Trans. A 27A 2727
[18]	Deschamps J, Georgelin M, Pocheau A 2006 Europhys. Lett. 76 291
[19]	Pocheau A, Deschamps J, Georgelin M 2007JOM 59 71
[20]	Wang Z J, Wang J C, Yang G C 2009 Phys. Rev. E 80 052603
[21]	Wang Z J, Li J J, Wang J C 2011 J. Cryst. Growth 328 108
[22]	Yang C B, Liu L, Zhao X B, Liu G, Zhang J, Fu H Z 2011 Acta Metall. Sin. 47 1246 (in Chinese) [杨初斌, 刘林, 赵新宝, 刘刚, 张军, 傅恒志 2011 金属学报 47 1246]
[23]	Muschol M, Liu D, Cummins H Z 1992 Phys. Rev. A 46 1038
[24]	Trivedi R, Kurz W 1994 Acta Metall. Mater. 42 15

引用本文:

Citation:

计量

文章访问数: 1828
PDF下载量: 1207
被引次数: 0

晶体取向对定向凝固枝晶生长的影响

1. 西北工业大学, 凝固技术国家重点实验室, 西安 710072

基金项目:

国家重点基础研究发展计划(批准号: 2011CB610402)和国家自然科学基金(批准号: 50971102, 50901061)资助的课题.

收稿日期: 2012-11-30

修回日期: 2012-12-31

刊出日期: 2013-05-05

摘要: 采用类金属透明模型合金丁二腈-1.0 wt%乙醇(SCN-1.0 wt% Eth)合金, 考察了晶体取向对定向凝固过程中晶粒的平界面失稳孕育时间、枝晶形态演化以及枝晶一次间距的影响. 结果表明, 随着枝晶择优生长方向与温度梯度方向夹角的增大, 晶粒的平界面失稳孕育时间增加, 界面的稳定性增强; 对于不同晶体取向的枝晶形态演化, 枝晶择优生长方向与温度梯度方向夹角越大, 枝晶二次臂不对称生长越严重, 同时, 具有生长优势的枝晶二次臂对相邻枝晶的生长的抑制越强烈; 至于不同晶体取向的枝晶一次间距, 随着枝晶择优生长方向与温度梯度方向夹角的增大, 枝晶一次间距增大.

关键词:

Effect of crystallographic orientation on dendrite growth in directional solidification

1.
State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China

Fund Project:

Project supported by the National Basic Research Program of China (Grant No. 2011CB610402), and the National Natural Science Foundation of China (Grant Nos. 50971102, 50901061).

Received Date: 30 November 2012

Accepted Date: 31 December 2012

Published Online: 05 May 2013

Abstract: Dendrite is a typical pattern in directional solidification, attracting many theoretical and experimental researches. However, the effect of crystallographic orientation on dendrite growth is less considered in these researches. In this paper, using a transparent model alloy SCN-1.0 wt% Eth, the effects of crystallographic orientation on the incubation time of planar interface instability, the dendritical morphological feature, and the primary dendrite spacing in directional solidification are investigated. Three crystal grains with different angles between the dendrite axis direction and thermal gradient direction are chosen in our experimental. The experimental results show that the incubation time of planar interface instability increases with the deviation of dendrite axis from thermal gradient direction, which suggests that the deviation of dendrite axis favors the planar interface stability. And with the increase of deviation angle of dendrite axis, the side branches of dendrite become more asymmetric and the preferred side-branches suppress neighboring dendrite growth. Also it is found that the primary dendrite spacing becomes larger as the angle between the dendrite axis direction and thermal gradient direction increases.

Keywords:

全文HTML

参考文献 (24)

搜索

留言板