Search

Article

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

Simulation of residual stress in viscoelastic mold filling process

Yang Bin-Xin Ouyang Jie

Simulation of residual stress in viscoelastic mold filling process

Yang Bin-Xin, Ouyang Jie
PDF
Get Citation

(PLEASE TRANSLATE TO ENGLISH

BY GOOGLE TRANSLATE IF NEEDED.)

Metrics
  • Abstract views:  3518
  • PDF Downloads:  468
  • Cited By: 0
Publishing process
  • Received Date:  29 May 2012
  • Accepted Date:  02 July 2012
  • Published Online:  05 December 2012

Simulation of residual stress in viscoelastic mold filling process

  • 1. School of Applied Science, Taiyuan University of Science and Technology, Taiyuan 030024, China;
  • 2. Department of Applied Mathematics, Northwestern Polytechnical University, Xi'an 710129, China
Fund Project:  Project supported by the National Basic Research Program of China (Grant No. 2012CB025903), the Natural Science Foundation of Shanxi Province, China (Grant No. 2012011019-2), and the Taiyuan University of Science and Technology Doctoral Sustentation Fund, China (Grant No. 20112011).

Abstract: Flow induced residual stress is the major reason for stress cracking and warping of plastic products, the study on which is significant to overcome the flaws of products. In this paper, the energy equation based on Extended Pom-Pom constitutive relationship is deduced. A non-isothermal viscoelastic-Newtonian two-phase fluid model for mold filling process of viscoelastic materials is set up. The conservative interface capturing technique and the flow field solving method are coupled to perform a dynamic simulation. The distribution of the frozen skin layer and the shear rates are given. The flow induced residual stress is predicted and analyzed. The numerical results show that the thickness of the frozen skin layer is dependent on the injection velocity and a higher injection velocity corresponds to a thin frozen skin layer. Near the walls of the product, the shear rate and the residual stress are almost zero. At the position of subsurface, the shear rate and the residual stress reach their largest values. At the positions far away from the walls of the product, the shear rate and the residual stress are small.

Reference (16)

Catalog

    /

    返回文章
    返回