搜索

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

温度梯度法宝石级金刚石的合成及表征

肖宏宇 苏剑峰 张永胜 鲍志刚

引用本文:
Citation:

温度梯度法宝石级金刚石的合成及表征

肖宏宇, 苏剑峰, 张永胜, 鲍志刚

Synthesis and characterization of the Gem-diamond by temperature gradient method

Xiao Hong-Yu, Su Jian-Feng, Zhang Yong-Sheng, Bao Zhi-Gang
PDF
导出引用
  • 利用温度梯度法,在5.05.7 GPa, 12501600 ℃条件下, 研究了FeNiMnCo触媒合成宝石级金刚石的温度和压力区间, 给出了P-T相图. 基于有限元法的温度场模拟及碳素浓度梯度拟合结果表明, I型温度场只适合生长大尺寸优质板状及小尺寸塔状金刚石单晶; II型温度场可以合成出大尺寸优质板状或塔状金刚石单晶. 该结论被Ib型及掺硼宝石级金刚石晶体生长实验所证实. 提出碳素浓度梯度是决定晶体生长速度及合成晶体品质的关键因素. 研究得到了只有触媒中温度场分布与晶体尺寸、形貌相匹配时, 才能合成出优质宝石级金刚石单晶的晶体生长规律. 揭示了{110}和{113}高指数晶面在Ib型金刚石V形区内的分布规律. 通过傅里叶红外光谱检测发现, FeNiMnCo触媒合成金刚石的氮含量较低, 较低的氮含量是由铁会降低金刚石氮含量所致. 氮含量低有利于金刚石的光谱透过性.
    At pressure 5.0-5.7 GPa and temperature 1250-1600 ℃, the conditions of synthesis Gem-diamond are reported using FeNiMnCo catalyst by temperature gradient method (TGM), and the P-T phase diagram is given. Temperature field and carbon concentration gradient are simulated based on finite element method (FEM). The results of simulation and experiment show that type-I temperature field is suitable for growing high-quality large sheet-shaped Gem-diamond and small tower-shaped Gem-diamond; however, choosing type-II temperature field, both large sheet-shaped Gem-diamond and large tower-shaped Gem-diamond can be synthesized (type-Ib diamond and boron-doped diamond). On this basis, the growth speed and crystal quality are found to be determined by the carbon concentration gradient, and the rule that high-quality Gem-diamond can be synthesized when temperature field is suitable for the size and shape of diamond growing is given. The pressure and temperature regions for {110} and {113} faces to exist are studied. According to the analysis of Fourier infrared spectroscopy, it is found that the nitrogen concentrations in type-Ib and boron-doped diamonds synthesized by FeNiMnCo catalyst, which are due to the influence of Fe element, are lower than that of normal diamond. The diamond with low nitrogen can be used as an optical material with better transmission characteristics.
    • 基金项目: 国家自然科学基金(批准号:50572032,50801030)资助的课题.
    • Funds: Project supported by the National Natural Science Foundation of China (Grant Nos. 50572032, 50801030).
    [1]

    Yamamoto M, Kumasaka T, Ishikawa T 2000 Rev. High Press Sci. Tech. 10 56

    [2]

    Sumiya H, Toda N, Satoh S 1999 Rev. High Press. Sci. Tech. 9 255

    [3]

    Isoya J, Kanda H, Akaishi M, Morita Y, Ohshima T 1997 Diamond Rel. Mater. 6 356

    [4]

    Klein C A 2002 Diamond Rel. Mater. 11 218

    [5]

    Ying X T, Luo J L, Wang P N, Cui M Q, Zhao Y D, Li G, Zhu P P 2003 Diamond Rel. Mater. 12 719

    [6]

    Xie J, Tamaki J 2006 Aviation Journal of Materials Processing Technology 180 83

    [7]

    Moseley S G, Bohn K P, Goedickemeier M 2009 International Journal of Refractory Metals and Hard Materials 27 394

    [8]

    Zong W J, Cheng K, Li D, Sun T, Liang Y C 2007 International Journal of Machine Tools and Manufacture 47 852

    [9]

    Sharif Uddin M, Seah K H W, Rahman M, Li X P, Liu K 2007 Journal of Materials Processing Technology 185 24

    [10]

    Hajj H E, Denisenko A, Kaiser A, Balmer R S, Kohn E 2008 Diamond Rel. Mater. 17 1259

    [11]

    Doneddu D, Guy O J, Dunstan P R, Maffeis G G, Teng K S, Wilks S P, Lgic P, Twitchen D, Clement R M 2007 Surf. Sci. 602 1135

    [12]

    Wang L J, Liu J M, Su Q F, Shi W M, Xia Y B 2006 Acta Phys. Sin. 55 2518 (in Chinese) [王林军, 刘健敏, 苏清峰, 史伟民, 夏义本 2006 物理学报 55 2518]

    [13]

    Xiao H Y, Jia X P, Ma H A, Li S S, Li Y, Zhao M 2010 Chinese Science Bulletin 55 1

    [14]

    Kanda H, Akaishi M, Yamaoka S 1999 Diamond Rel. Mater. 8 1441

    [15]

    Liang Z Z, Liang J Q, Zheng N, Jia X P, Li G J 2009 Acta Phys. Sin. 58 8039 (in Chinese) [梁中翥, 梁静秋, 郑娜, 贾晓鹏, 李桂菊 2009 物理学报 58 8039]

    [16]

    Qin J M, Zhang Y, Cao J M, Tian L F 2011 Acta Phys. Sin. 60 058102 (in Chinese) [秦杰明, 张莹, 曹建明, 田立飞 2009 物理学报 60 058102]

  • [1]

    Yamamoto M, Kumasaka T, Ishikawa T 2000 Rev. High Press Sci. Tech. 10 56

    [2]

    Sumiya H, Toda N, Satoh S 1999 Rev. High Press. Sci. Tech. 9 255

    [3]

    Isoya J, Kanda H, Akaishi M, Morita Y, Ohshima T 1997 Diamond Rel. Mater. 6 356

    [4]

    Klein C A 2002 Diamond Rel. Mater. 11 218

    [5]

    Ying X T, Luo J L, Wang P N, Cui M Q, Zhao Y D, Li G, Zhu P P 2003 Diamond Rel. Mater. 12 719

    [6]

    Xie J, Tamaki J 2006 Aviation Journal of Materials Processing Technology 180 83

    [7]

    Moseley S G, Bohn K P, Goedickemeier M 2009 International Journal of Refractory Metals and Hard Materials 27 394

    [8]

    Zong W J, Cheng K, Li D, Sun T, Liang Y C 2007 International Journal of Machine Tools and Manufacture 47 852

    [9]

    Sharif Uddin M, Seah K H W, Rahman M, Li X P, Liu K 2007 Journal of Materials Processing Technology 185 24

    [10]

    Hajj H E, Denisenko A, Kaiser A, Balmer R S, Kohn E 2008 Diamond Rel. Mater. 17 1259

    [11]

    Doneddu D, Guy O J, Dunstan P R, Maffeis G G, Teng K S, Wilks S P, Lgic P, Twitchen D, Clement R M 2007 Surf. Sci. 602 1135

    [12]

    Wang L J, Liu J M, Su Q F, Shi W M, Xia Y B 2006 Acta Phys. Sin. 55 2518 (in Chinese) [王林军, 刘健敏, 苏清峰, 史伟民, 夏义本 2006 物理学报 55 2518]

    [13]

    Xiao H Y, Jia X P, Ma H A, Li S S, Li Y, Zhao M 2010 Chinese Science Bulletin 55 1

    [14]

    Kanda H, Akaishi M, Yamaoka S 1999 Diamond Rel. Mater. 8 1441

    [15]

    Liang Z Z, Liang J Q, Zheng N, Jia X P, Li G J 2009 Acta Phys. Sin. 58 8039 (in Chinese) [梁中翥, 梁静秋, 郑娜, 贾晓鹏, 李桂菊 2009 物理学报 58 8039]

    [16]

    Qin J M, Zhang Y, Cao J M, Tian L F 2011 Acta Phys. Sin. 60 058102 (in Chinese) [秦杰明, 张莹, 曹建明, 田立飞 2009 物理学报 60 058102]

  • [1] 肖宏宇, 李勇, 鲍志刚, 佘彦超, 王应, 李尚升. 触媒组分对高温高压金刚石大单晶生长及裂纹缺陷的影响. 物理学报, 2023, 72(2): 020701. doi: 10.7498/aps.72.20221841
    [2] 曹明鹏, 吴晓鹏, 管宏山, 单光宝, 周斌, 杨力宏, 杨银堂. 基于对偶单元法的三维集成微系统电热耦合分析. 物理学报, 2021, 70(7): 074401. doi: 10.7498/aps.70.20201628
    [3] 尤悦, 李尚升, 宿太超, 胡美华, 胡强, 王君卓, 高广进, 郭明明, 聂媛. 高温高压下金刚石大单晶研究进展. 物理学报, 2020, 69(23): 238101. doi: 10.7498/aps.69.20200692
    [4] 王凯悦, 郭睿昂, 王宏兴. 金刚石氮-空位缺陷发光的温度依赖性. 物理学报, 2020, 69(12): 127802. doi: 10.7498/aps.69.20200395
    [5] 赵运进, 田锰, 黄勇刚, 王小云, 杨红, 米贤武. 基于有限元法的光子并矢格林函数重整化及其在自发辐射率和能级移动研究中的应用. 物理学报, 2018, 67(19): 193102. doi: 10.7498/aps.67.20180898
    [6] 肖宏宇, 秦玉琨, 隋永明, 梁中翥, 刘利娜, 张永胜. 合成腔体尺寸对Ib型六面体金刚石单晶生长的影响. 物理学报, 2016, 65(7): 070705. doi: 10.7498/aps.65.070705
    [7] 房超, 贾晓鹏, 陈宁, 周振翔, 李亚东, 李勇, 马红安. 添加Fe(C5H5)2合成氢掺杂金刚石大单晶及其表征. 物理学报, 2015, 64(12): 128101. doi: 10.7498/aps.64.128101
    [8] 张贺, 李尚升, 宿太超, 胡美华, 周佑默, 樊浩天, 龚春生, 贾晓鹏, 马红安, 肖宏宇. 温度对Ib型和IIa型金刚石大单晶(100)表面特征的影响. 物理学报, 2015, 64(19): 198103. doi: 10.7498/aps.64.198103
    [9] 房超, 贾晓鹏, 颜丙敏, 陈宁, 李亚东, 陈良超, 郭龙锁, 马红安. 高温高压下氮氢协同掺杂对{100}晶面生长宝石级金刚石的影响. 物理学报, 2015, 64(22): 228101. doi: 10.7498/aps.64.228101
    [10] 周振翔, 贾晓鹏, 李勇, 颜丙敏, 王方标, 房超, 陈宁, 李亚东, 马红安. 锌添加对大尺寸金刚石生长的影响. 物理学报, 2014, 63(24): 248104. doi: 10.7498/aps.63.248104
    [11] 肖宏宇, 李尚升, 秦玉琨, 梁中翥, 张永胜, 张东梅, 张义顺. 高温高压下掺硼宝石级金刚石单晶生长特性的研究. 物理学报, 2014, 63(19): 198101. doi: 10.7498/aps.63.198101
    [12] 林雪玲, 潘凤春. 氮掺杂的金刚石磁性研究. 物理学报, 2013, 62(16): 166102. doi: 10.7498/aps.62.166102
    [13] 胡美华, 毕宁, 李尚升, 宿太超, 李小雷, 胡强, 贾晓鹏, 马红安. 国产六面顶压机多晶种法合成宝石级金刚石单晶. 物理学报, 2013, 62(18): 188103. doi: 10.7498/aps.62.188103
    [14] 齐跃峰, 乔汉平, 毕卫红, 刘燕燕. 热激法光子晶体光纤光栅制备工艺中热传导特性研究. 物理学报, 2011, 60(3): 034214. doi: 10.7498/aps.60.034214
    [15] 秦杰明, 张莹, 曹建明, 田立飞. 纯铁触媒合成磨料级金刚石及表征. 物理学报, 2011, 60(5): 058102. doi: 10.7498/aps.60.058102
    [16] 刘全喜, 钟鸣. 激光二极管阵列端面抽运复合棒状激光器热效应的有限元法分析. 物理学报, 2010, 59(12): 8535-8541. doi: 10.7498/aps.59.8535
    [17] 韩奇钢, 马红安, 肖宏宇, 李瑞, 张聪, 李战厂, 田宇, 贾晓鹏. 基于有限元法分析宝石级金刚石的合成腔体温度场. 物理学报, 2010, 59(3): 1923-1927. doi: 10.7498/aps.59.1923
    [18] 韩奇钢, 贾晓鹏, 马红安, 李瑞, 张聪, 李战厂, 田宇. 基于三维有限元法模拟分析六面顶顶锤的热应力. 物理学报, 2009, 58(7): 4812-4816. doi: 10.7498/aps.58.4812
    [19] 姜本学, 徐 军, 李红军, 王静雅, 赵广军, 赵志伟. 温度梯度法生长Nd:YAG激光晶体的核心分布. 物理学报, 2007, 56(2): 1014-1019. doi: 10.7498/aps.56.1014
    [20] 曾雄辉, 赵广军, 徐 军. 温度梯度法生长的Ce: YAlOZr3高温闪烁晶体的光谱分析. 物理学报, 2004, 53(6): 1935-1939. doi: 10.7498/aps.53.1935
计量
  • 文章访问数:  5961
  • PDF下载量:  498
  • 被引次数: 0
出版历程
  • 收稿日期:  2012-04-05
  • 修回日期:  2012-06-30
  • 刊出日期:  2012-12-05

/

返回文章
返回