搜索

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

热拉伸和化学腐蚀相结合制备弯曲光纤探针

徐 凯 潘 石 吴世法 孙 伟 李银丽

引用本文:
Citation:

热拉伸和化学腐蚀相结合制备弯曲光纤探针

徐 凯, 潘 石, 吴世法, 孙 伟, 李银丽

Fabrication of bend optical fibre probes by heated pulling combined with chemica l ething

Xu Kai, Pan Shi, Wu Shi-Fa, Sun Wei, Li Yin-Li
PDF
导出引用
  • 提出了原子力/光子扫描隧道显微镜(AF/PSTM)系统的关键部分——双功能弯曲光纤探针的制作方法.采用热拉伸与动态、静态两步化学腐蚀相结合的方法制作出AF/PSTM弯曲光纤探针,弯曲角度约为150°,尖端曲率半径优于100nm,锥角范围为60°—90°.将这种双功能弯曲光纤探针应用在新研制的AF/PSTM系统上,同时获得了样品的光学与形貌图像,实现了图像分解.
    In this paper,a fabrication method for the bi-functional bend optical fiber probe which is the key element of atomic force/photon scanning tunnel microscope (AF/PSTM)system,is described.The heated pulling combined with dynamic/static two-s teps chemical etching method is proposed and developed.Using this method,we have made the AF/PSTM bend optical fibre probe.The bend angle of the probe is about 150 degrees;the radius of curvature at the top end is better than 100nm;the cone angle varies from 60 to 90 degrees.The bi-functional bend optical fiber probe i s used in our newly developed AF/PSTM system.The optical and topographic images are obtained simultaneously and the image separation is realized.
    • 基金项目: 国家自然科学基金(批准号:60007011,30270367)、国家科技部和中国分析测试协会仪器功能开发基金(批准号:GN-99-15)、教育部博士点基金(批准号:20020141018)资助的课题.
计量
  • 文章访问数:  6199
  • PDF下载量:  801
  • 被引次数: 0
出版历程
  • 收稿日期:  2002-08-07
  • 修回日期:  2002-09-09
  • 刊出日期:  2003-05-20

/

返回文章
返回