搜索

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

基于平行金属条的左手结构设计与仿真研究

张松 屈绍波 马华 谢峰 徐卓

引用本文:
Citation:

基于平行金属条的左手结构设计与仿真研究

张松, 屈绍波, 马华, 谢峰, 徐卓

Design and simulation of left-handed-property structure based on parallel metallic slabs

Zhang Song, Qu Shao-Bo, Ma Hua, Xie Feng, Xu Zhuo
PDF
导出引用
  • 基于双平行金属线结构,将金属线宽度增大,变为金属条,同时在金属条结构单元中部引入缺口,使中部变细.由于等离子体效应,该双平行金属条结构在一定频段等效介电常数为负;又由于单元结构中部较细,使得该结构在一定频率会发生强烈的磁谐振.通过模拟仿真研究发现这种结构在X波段可以实现ε和μ同时为负.出现双负(εμ<0)的频段会随着谐振频率的变化而变化.理论分析表明谐振频率与金属条宽度、缺口高度及中部宽度有关,仿真结果同分析一致.
    The structure of the parallel metallic slabs with middle-part-indentation is based on the parallel metallic wires. The permittivity of the structure is negative in a certain frequency range because of the effect of the plasma. And the strong magnetic resonance occurs in the special frequency range because the middle-part-indentation is introduced in the parallel metallic slabs. The result of simulation shows that the structure composed of ceramic alumina has negative permittivity and permeability in the X-band. The range of the double negative (εμ<0) varies with the resonance frequency. Theoretical analysis, which is in agreement with the results of simulation, indicates that the resonance frequency is related with the width of metallic slaps, height of indentation and the width of the middle-part of the structure.
    • 基金项目: 国家自然科学基金(批准号:10474077,50632030,60871027)资助的课题.
计量
  • 文章访问数:  7370
  • PDF下载量:  1879
  • 被引次数: 0
出版历程
  • 收稿日期:  2008-06-30
  • 修回日期:  2008-10-30
  • 刊出日期:  2009-03-05

/

返回文章
返回