搜索

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

大功率光纤激光焊焊缝跟踪偏差红外检测方法

高向东 莫玲 仲训杲 游德勇 Katayama Seiji

引用本文:
Citation:

大功率光纤激光焊焊缝跟踪偏差红外检测方法

高向东, 莫玲, 仲训杲, 游德勇, Katayama Seiji

Detection of seam tracking offset based on infrared image during high-power fiber laser welding

Gao Xiang-Dong, Mo Ling, Zhong Xun-Gao, You De-Yong, Katayama Seiji
PDF
导出引用
  • 精确控制激光束使其始终对准并跟踪焊缝是保证激光焊接质量的前提.针对大功率(激光功率10 kW)光纤激光焊接304型不锈钢紧密对接焊缝(间隙为00.1 mm),研究一种基于红外热像的焊缝跟踪偏差检测新方法. 采用红外传感高速摄像机摄取焊接区域熔池红外动态热像,分析激光束对准和偏离焊缝中心时的熔池温度分布和红外辐射特性,以熔池匙孔形变参数和热堆积效应参数作为激光束与焊缝中心偏差检测特征值,通过图像识别技术研究和分析特征值与焊缝偏差之间的关系. 激光焊接试验结果表明,熔池匙孔形变参数和热堆积效应参数与焊缝偏差
    Seam tracking is a significant precondition to obtain good welding quality. During the laser welding, the laser beam focus must be controlled to follow the welding seam accurately. A novel approach to detecting the offset between the laser beam focus and the welding seam based on infrared image processing is investigated during high-power fiber laser butt-joint welding of type 304 austenitic stainless steel plates at a continuous wave fiber laser power of 10 kW. The joint gap width is less than 0.1 mm. An infrared sensitive high speed camera arranged in off-axis direction of laser beam is used to capture the dynamic thermal images of a molten pool. The characteristics of thermal distribution and infrared radiation of the molten pool, when the laser beam focus is deviated from the welding seam center, are analyzed. Two parameters called the keyhole morphological parameter and the heat accumulation effect parameter are defined as the characteristic values of seam tracking offset to determine the offset between the laser beam focus and the desired welding seam. Also, the image processing technique is used to analyze the infrared images of the molten pool, which indicates the presence of mathematic correlation between the defined two parameters and the seam tracking offset. The welding experiments confirm that the offset between the laser beam focus and the welding seam can be estimated by the keyhole morphological parameter and the heat accumulation effect parameter effectively.
    • 基金项目: 广东省自然科学基金(批准号:10251009001000001,9151009001000020,07001764)和高等学校博士学科点专项科研基金(批准号:20104420110001)资助的课题.
    [1]

    Kawahito Y, Mizutani M, Katayama S 2007 J. Phys. D 40 5854

    [2]
    [3]

    Noruk J, Boillot J P 2006 Can. Welding Assoc. J. 8(Summer) 8

    [4]
    [5]

    Cao B, Xiang Y P, L X Q, Zeng M, Huang S S 2008 Chin. Phys. B 17 865

    [6]

    Gong X F, Liu X Z, Ma Y, Ma Q Y, Qiu Y Y, Zhang D 2007 Chin. Phys. B 16 2745

    [7]
    [8]
    [9]

    Mackwood A P, Crafer R C 2005 Opt. Laser Technol. 37 99

    [10]
    [11]

    Gao X D, You D Y, Katayama S, Kawahito Y 2009 Proceedings of the 5th International Congress on Laser Advanced Materials Processing (Cobe: Japan Laser Processing Socity) p289

    [12]
    [13]

    Tan H P, Xia X L, Liu L H, Ruan L M 2006 Numeric Calculation of Infrared Radiate Characteristic and Transfer Heat Radiation Computing (Harbin: Harbin Industry University Press) p12 (in Chinese)[谈和平、夏新林、刘林华、阮立明2006 红外辐射特性与传输的数值计算计算热辐射学 (哈尔滨:哈尔滨工业大学出版社) 第12页]

    [14]

    Bo Y, Wang D W, Ying C T 2003 Acta Phys. Sin. 52 2196 (in Chinese)[薄 勇、王德武、应纯同 2003 物理学报 52 2196]

    [15]
    [16]
    [17]

    Gonzales R C, Woods R E, Eddins S L 2004 Digital Image Using MATLAB (Beijing: Publishing House of Electronics Industry) p405

    [18]

    Huang R S, Liu L M, Song G 2007 Mater. Sci. Eng. A 447 239

    [19]
    [20]
    [21]

    Liu L, Ye Y T, Wu Y F, Fang L, Lu J J 2007 Acta Phys. Sin. 56 3172 (in Chinese)[刘 霖、叶玉堂、吴云峰、方 亮、陆佳佳 2007 物理学报 56 3172]

    [22]

    Xiang Z J, Li J L 2003 Opt. Laser Technol. 35 5

    [23]
  • [1]

    Kawahito Y, Mizutani M, Katayama S 2007 J. Phys. D 40 5854

    [2]
    [3]

    Noruk J, Boillot J P 2006 Can. Welding Assoc. J. 8(Summer) 8

    [4]
    [5]

    Cao B, Xiang Y P, L X Q, Zeng M, Huang S S 2008 Chin. Phys. B 17 865

    [6]

    Gong X F, Liu X Z, Ma Y, Ma Q Y, Qiu Y Y, Zhang D 2007 Chin. Phys. B 16 2745

    [7]
    [8]
    [9]

    Mackwood A P, Crafer R C 2005 Opt. Laser Technol. 37 99

    [10]
    [11]

    Gao X D, You D Y, Katayama S, Kawahito Y 2009 Proceedings of the 5th International Congress on Laser Advanced Materials Processing (Cobe: Japan Laser Processing Socity) p289

    [12]
    [13]

    Tan H P, Xia X L, Liu L H, Ruan L M 2006 Numeric Calculation of Infrared Radiate Characteristic and Transfer Heat Radiation Computing (Harbin: Harbin Industry University Press) p12 (in Chinese)[谈和平、夏新林、刘林华、阮立明2006 红外辐射特性与传输的数值计算计算热辐射学 (哈尔滨:哈尔滨工业大学出版社) 第12页]

    [14]

    Bo Y, Wang D W, Ying C T 2003 Acta Phys. Sin. 52 2196 (in Chinese)[薄 勇、王德武、应纯同 2003 物理学报 52 2196]

    [15]
    [16]
    [17]

    Gonzales R C, Woods R E, Eddins S L 2004 Digital Image Using MATLAB (Beijing: Publishing House of Electronics Industry) p405

    [18]

    Huang R S, Liu L M, Song G 2007 Mater. Sci. Eng. A 447 239

    [19]
    [20]
    [21]

    Liu L, Ye Y T, Wu Y F, Fang L, Lu J J 2007 Acta Phys. Sin. 56 3172 (in Chinese)[刘 霖、叶玉堂、吴云峰、方 亮、陆佳佳 2007 物理学报 56 3172]

    [22]

    Xiang Z J, Li J L 2003 Opt. Laser Technol. 35 5

    [23]
  • [1] 王宣, 孙超, 李明杨, 张少东. 不确定浅海环境中水平阵角度域子空间检测. 物理学报, 2022, 71(8): 084304. doi: 10.7498/aps.71.20211742
    [2] 潘祚坚, 陈志忠, 焦飞, 詹景麟, 陈毅勇, 陈怡帆, 聂靖昕, 赵彤阳, 邓楚涵, 康香宁, 李顺峰, 王琦, 张国义, 沈波. 面向显示应用的微米发光二极管外延和芯片关键技术综述. 物理学报, 2020, 69(19): 198501. doi: 10.7498/aps.69.20200742
    [3] 侯旺, 于起峰, 雷志辉, 刘晓春. 基于分块速度域改进迭代运动目标检测算法的红外弱小目标检测. 物理学报, 2014, 63(7): 074208. doi: 10.7498/aps.63.074208
    [4] 刘海波, 吴德伟, 金伟, 王永庆. Duffing振子微弱信号检测方法研究. 物理学报, 2013, 62(5): 050501. doi: 10.7498/aps.62.050501
    [5] 陈大鹏, 曾智, 张存林, 金学元, 张峥. 热核聚变实验堆中超导母线绝缘层的红外热波检测. 物理学报, 2012, 61(9): 094207. doi: 10.7498/aps.61.094207
    [6] 陈大鹏, 邢春飞, 张峥, 张存林. 太赫兹激励的红外热波检测技术. 物理学报, 2012, 61(2): 024202. doi: 10.7498/aps.61.024202
    [7] 高向东, 龙观富, 汪润林, Katayama Seiji. 大功率盘形激光焊飞溅特征分析. 物理学报, 2012, 61(9): 098103. doi: 10.7498/aps.61.098103
    [8] 兰忠, 朱霞, 彭本利, 林勐, 马学虎. 滴状冷凝过程液滴自由表面温度场分析. 物理学报, 2012, 61(15): 150508. doi: 10.7498/aps.61.150508
    [9] 郑艳斌, 宋煜, 杜宝祥, 潘晶, 丁群. 一种混沌密码序列周期特性检测新方法. 物理学报, 2012, 61(23): 230501. doi: 10.7498/aps.61.230501
    [10] 谢小平, 陈宏平, 曹志彤, 何国光. 归一化KLD系数及多维序列相关和同步的检测. 物理学报, 2012, 61(13): 130505. doi: 10.7498/aps.61.130505
    [11] 蔡朝斌, 赵建林, 彭涛, 李东. 高功率激光系统中随机分布缺陷产生的"热像". 物理学报, 2011, 60(11): 114209. doi: 10.7498/aps.60.114209
    [12] 薛力芳, 张强, 李芳, 周燕, 刘育梁. 高频调制大功率窄线宽分布反馈光纤激光器. 物理学报, 2011, 60(1): 014213. doi: 10.7498/aps.60.014213
    [13] 邢文鑫, 张巍, 石立超, 王雯, 赵红, 李志广, 黄翊东, 彭江得. 用于气体痕量检测的中红外空心布拉格光纤. 物理学报, 2010, 59(12): 8640-8645. doi: 10.7498/aps.59.8640
    [14] 晋建秀, 丘水生, 谢丽英, 冯明库. 一种基于周期轨道统计的混沌信号不可预测性强弱的检测方法. 物理学报, 2008, 57(5): 2743-2749. doi: 10.7498/aps.57.2743
    [15] 彭 涛, 赵建林, 谢良平, 叶知隽, 李 强, 粟敬钦. 厚介质情况下激光“热像”的演化规律分析. 物理学报, 2007, 56(6): 3255-3260. doi: 10.7498/aps.56.3255
    [16] 付生辉, 宋国峰, 陈良惠. 大功率分布反馈激光器中光栅优化及试验. 物理学报, 2007, 56(3): 1613-1616. doi: 10.7498/aps.56.1613
    [17] 于海鹰, 崔碧峰, 陈依新, 邹德恕, 刘 莹, 沈光地. 一种与光纤高效耦合的新型大光腔大功率半导体激光器. 物理学报, 2007, 56(7): 3945-3949. doi: 10.7498/aps.56.3945
    [18] 谌 龙, 王德石. 基于参数非共振激励混沌抑制原理的微弱方波信号检测. 物理学报, 2007, 56(9): 5098-5102. doi: 10.7498/aps.56.5098
    [19] 刘 霖, 叶玉堂, 吴云峰, 方 亮, 陆佳佳. GaAs表面不同运动状态H2SO4-H2O2-H2O液滴的红外辐射特性. 物理学报, 2007, 56(6): 3172-3177. doi: 10.7498/aps.56.3172
    [20] 辛国锋, 陈国鹰, 花吉珍, 赵润, 康志龙, 冯荣珠, 安振峰. 941nm大功率应变单量子阱激光器的波长设计. 物理学报, 2004, 53(5): 1293-1298. doi: 10.7498/aps.53.1293
计量
  • 文章访问数:  6665
  • PDF下载量:  1646
  • 被引次数: 0
出版历程
  • 刊出日期:  2011-04-05

/

返回文章
返回