搜索

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

旁路耦合电弧焊温度场模拟及验证

石玗 韩日宏 黄健康 樊丁

引用本文:
Citation:

旁路耦合电弧焊温度场模拟及验证

石玗, 韩日宏, 黄健康, 樊丁

Numerical simulation of temperature field of DE-GMAW and its comparison with experimental measurements

Shi Yu, Han Ri-Hong, Huang Jian-Kang, Fan Ding
PDF
导出引用
  • 针对旁路耦合电弧焊的特点, 建立了一种适于用旁路耦合电弧焊的复合热源模型. 利用该热源模型对不同焊接参数下的旁路耦合电弧焊温度场进行了数值分析, 得到了总电流相同时不同旁路电流下的焊缝熔深、母材温度和特征点焊接热循环曲线的模拟结果, 分析了旁路耦合电弧焊焊接参数对母材热输入的影响, 并将特征点热循环曲线的模拟结果与相同条件下的试验结果进行了比较. 结果表明, 焊接总电流相同时母材热输入随着旁路电流的增加而降低, 且越靠近焊缝母材热输入的降幅越大, 特征点焊接热循环曲线的模拟结果与试验结果基本一致, 旁路耦合电弧焊温度场模型是合理的, 所建立的热源模型能够正确反映焊接参数与母材热输入之间的关系.
    Based on the features of DE-GMAW (double electrode gas metal arc welding), a new hybrid heat-source model that is suited for the DE-GMAW is established. Using this heat-source model, the temperature fields of DE-GMAW wtih different welding parameters are simulated. According to the simulation results with different welding parameters, in this article we analyze the influence of welding parameters on the heat input of base metal in DE-GMAW. To verify the rationality of the hybrid heat-source model of DE-GMAW, the simulation results of the temperature field are compared with the results obtained from the experiment that is carried out under the same condition. The research results indicate that under the same total current, the heat input of base metal decreases gradually with the increase of by-pass current. Moreover, the closer to the welding line the greater the decrease rate of the heat input of base metal is. The study and the comparison of the thermal cycle curve of measured points show that the simulation results are in good agreement with the experimental results. These results indicate that the temperature field model is accurate and the hybrid heat-source model is reasonable.
    • 基金项目: 国家自然科学基金(批准号: 50805073), 兰州理工大学优秀青年教师培养计划(批准号: Q200901)和教育部科学技术研究重点项目(批准号: 210229)资助的课题.
    • Funds: Project supported by the National Natural Science Foundation of China (Grant No. 50805073), the Prominent Youth Foundation of LUT (Grant No. Q200901), and the Key Project of Chinese Ministry of Education, China (Grant No. 210229).
    [1]

    Zhang Y M, Jiang M, Lu W 2004 Welding Journal 83 39

    [2]

    Shi Y, Liu X P, Zhang Y M 2008 Welding Journal 87 229

    [3]

    Wu C S,Zhang M X,Li K H,Zhang Y M 2007 Acta Metallurgica Sinica 43 663 (in Chinese) [武传松, 张明贤, 李克海, 张裕明 2007 金属学报 43 663]

    [4]

    Liu H, Ke F J, Pan H, Zhou M 2007 Acta Phys. Sin. 56 407 (in Chinese) [刘浩, 柯孚久, 潘晖, 周敏 2007 物理学报 56 407]

    [5]

    Zhang M X,Wu C S, Li K H,Zhang Y M 2007 Transactions of the China Welding Institution 28 33 (in Chinese) [张明贤, 武传松, 李克海张, 张裕明 2007 焊接学报 28 33]

    [6]

    Brickstad B, Josefson B L 1998 International Journal of Pressure Vessele and Piping 75 11

    [7]

    Wu C S 2007 Welding Thermal Processes and Weld Pool Behaviors (Beijing: China Machine Press) p122—124 (in Chinese) [武传松 2007 焊接热过程与熔池形态 (北京: 机械工业出版社) 第122—124页]

    [8]

    Edson C S 2006 International Journal of Machine Tools and Manufacture 46 1459

    [9]

    Lu S P, Dong W C, Li D Z, Li Y Y 2009 Acta Phys. Sin. 58 s95 (in Chinese) [陆善平, 董文超, 李殿中, 李依依 2009 物理学报 58 s95]

  • [1]

    Zhang Y M, Jiang M, Lu W 2004 Welding Journal 83 39

    [2]

    Shi Y, Liu X P, Zhang Y M 2008 Welding Journal 87 229

    [3]

    Wu C S,Zhang M X,Li K H,Zhang Y M 2007 Acta Metallurgica Sinica 43 663 (in Chinese) [武传松, 张明贤, 李克海, 张裕明 2007 金属学报 43 663]

    [4]

    Liu H, Ke F J, Pan H, Zhou M 2007 Acta Phys. Sin. 56 407 (in Chinese) [刘浩, 柯孚久, 潘晖, 周敏 2007 物理学报 56 407]

    [5]

    Zhang M X,Wu C S, Li K H,Zhang Y M 2007 Transactions of the China Welding Institution 28 33 (in Chinese) [张明贤, 武传松, 李克海张, 张裕明 2007 焊接学报 28 33]

    [6]

    Brickstad B, Josefson B L 1998 International Journal of Pressure Vessele and Piping 75 11

    [7]

    Wu C S 2007 Welding Thermal Processes and Weld Pool Behaviors (Beijing: China Machine Press) p122—124 (in Chinese) [武传松 2007 焊接热过程与熔池形态 (北京: 机械工业出版社) 第122—124页]

    [8]

    Edson C S 2006 International Journal of Machine Tools and Manufacture 46 1459

    [9]

    Lu S P, Dong W C, Li D Z, Li Y Y 2009 Acta Phys. Sin. 58 s95 (in Chinese) [陆善平, 董文超, 李殿中, 李依依 2009 物理学报 58 s95]

计量
  • 文章访问数:  6073
  • PDF下载量:  678
  • 被引次数: 0
出版历程
  • 收稿日期:  2011-03-23
  • 修回日期:  2011-05-03
  • 刊出日期:  2012-01-05

/

返回文章
返回