Search

Article

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

Analyses of buckling failure mode for porous materials under compression

Liu Pei-Sheng

Citation:

Analyses of buckling failure mode for porous materials under compression

Liu Pei-Sheng
PDF
Get Citation

(PLEASE TRANSLATE TO ENGLISH

BY GOOGLE TRANSLATE IF NEEDED.)

  • The compressive behavior is one of most basic mechanical properties for engineering materials, and the struts of porous materials under compression may display the buckling phenomena when the porous bodies are under compressive loadings. In the present paper, a failure model of simplified structures is established for isotropic three-dimensional reticulated porous materials, and the failure modes resulting from the strut bucklings are analyzed for these materials under compressive loadings. The mathematical relationships between nominal main stresses and porosities are systemically derived for this buckling failures of these materials under uniaxial compression, biaxial compression and triaxial compression. Based on these results, the relevant loading conditions resulting in the strut buckling are further obtained for these materials under compressive loadings.
    [1]

    Gibson L J, Ashby M F 1999 Cellular Solids: Structure and Properties (Cambridge: Cambridge University Press)

    [2]

    Banhart J 2001 Prog. Mater. Sci. 46 559

    [3]

    Liu P S, Liang K M 2001 J. Mater. Sci. 36 5059

    [4]

    Davis M E 2002 Nature 417 831

    [5]

    Turnbull M M, Landee C P 2002 Science 298 1723

    [6]

    Liu P S 2004 Introduction to Porous Materials (Beijing: Tsinghua University Press) (in Chinese) [刘培生 2004 多孔材料引论 (北京: 清华大学出版社)]

    [7]

    Ma C L 2004 Acta Phys. Sin. 53 1952 (in Chinese) [马春兰 2004 物理学报 53 1952]

    [8]

    van Santen R A 2006 Nature 444 46

    [9]

    Zhao X F, Fang Y 2006 Acta Phys. Sin. 55 3785 (in Chinese) [赵信峰、方 炎 2006 物理学报 55 3785]

    [10]

    Zhang H W, Li Y X 2007 Acta Phys. Sin. 56 4864 (in Chinese) [张华伟、李言祥 2007 物理学报 56 4864]

    [11]

    Rosa M E 2008 Phil. Mag. Lett. 88 637

    [12]

    Wang C F, Li Q S, Hu B, Li W B 2009 Chin. Phys. B 18 2610

    [13]

    Hamiuddin M 1986 Powder Metall. Int. 18 73

    [14]

    Ashby M F, Evans A, Fleck N A, Gibson L J, Hutchinson J W, Wadley H N G 2000 Metal Foams: A Design Guide (Boston: Elsevier Science)

    [15]

    Nagaki S, Sowerby R, Goya M 1991 Mater. Sci. Eng. A 142 163

    [16]

    Silva M G D A, Ramesh K T 1997 Mater. Sci. Eng. A 232 11

    [17]

    Simone A E, Gibson L J 1997 Mater. Sci. Eng. A 229 55

    [18]

    Han F S, Liu C S, Zhu Z G 1998 Acta Phys. Sin. 47 520 (in Chinese) [韩福生、刘长松、朱震刚 1998 物理学报 47 520]

    [19]

    Liu P S 2000 J. Adv. Mater. 32 9

    [20]

    Deshpande V S, Fleck N A 2000 J. Mech. Phys. Solids 48 1253

    [21]

    Badiche X, Forest S, Guibert T, Bienvenu Y, Bartout J D, Ienny P, Croset M, Bernet H 2000 Mater. Sci. Eng. A 289 276

    [22]

    Nieh T G, Higashi K, Wadsworth J 2000 Mater. Sci. Eng. A 283 105

    [23]

    Benouali A H, Froyen L, Delerue J F, Wevers M 2002 Mater. Sci. Tech. 18 489

    [24]

    Kwon Y W, Cooke R E, Park C 2003 Mater. Sci. Eng. A 343 63

    [25]

    Choe H, Dunand D C 2004 Mater. Sci. Eng. A 384 184

    [26]

    Liu P S, Sang H B 2004 Int. J. Iron Steel Res. 11 53

    [27]

    Liu P S 2006 Mater. Sci. Eng. A 422 176

    [28]

    Liu P S 2007 Materials Science Research Horizon (New York: NOVA Science Publishers) Chap 3

    [29]

    Liu P S 2007 Mater. Des. 28 2678

    [30]

    Liu P S 2009 Mater. Sci. Eng. A 507 190

    [31]

    Liu P S, Chen G F, Chen Y M 2009 Phil. Mag. Lett. 89 655

    [32]

    Liu P S 2010 Mater. Des. 31 2264

    [33]

    Liu P S 2010 Acta Phys. Sin. 59 4849 (in Chinese) [刘培生 2010 物理学报 59 4849]

    [34]

    Liu P S, Liang K M 2000 Mater. Sci. Tech. 16 575

    [35]

    Zhang W K, Li N Z, He D P 2005 J. Mater. Res. 15 1248

    [36]

    Liu P S 2006 Chin. J. Mater. Res. 20 64 (in Chinese) [刘培生 2006 材料研究学报 20 64]

    [37]

    Fan Q S 2008 Engineering Mechanics (Beijing: Machinical Industry Press) (in Chinese) [范钦珊 2008 工程力学 (北京:机械工业出版社)]

  • [1]

    Gibson L J, Ashby M F 1999 Cellular Solids: Structure and Properties (Cambridge: Cambridge University Press)

    [2]

    Banhart J 2001 Prog. Mater. Sci. 46 559

    [3]

    Liu P S, Liang K M 2001 J. Mater. Sci. 36 5059

    [4]

    Davis M E 2002 Nature 417 831

    [5]

    Turnbull M M, Landee C P 2002 Science 298 1723

    [6]

    Liu P S 2004 Introduction to Porous Materials (Beijing: Tsinghua University Press) (in Chinese) [刘培生 2004 多孔材料引论 (北京: 清华大学出版社)]

    [7]

    Ma C L 2004 Acta Phys. Sin. 53 1952 (in Chinese) [马春兰 2004 物理学报 53 1952]

    [8]

    van Santen R A 2006 Nature 444 46

    [9]

    Zhao X F, Fang Y 2006 Acta Phys. Sin. 55 3785 (in Chinese) [赵信峰、方 炎 2006 物理学报 55 3785]

    [10]

    Zhang H W, Li Y X 2007 Acta Phys. Sin. 56 4864 (in Chinese) [张华伟、李言祥 2007 物理学报 56 4864]

    [11]

    Rosa M E 2008 Phil. Mag. Lett. 88 637

    [12]

    Wang C F, Li Q S, Hu B, Li W B 2009 Chin. Phys. B 18 2610

    [13]

    Hamiuddin M 1986 Powder Metall. Int. 18 73

    [14]

    Ashby M F, Evans A, Fleck N A, Gibson L J, Hutchinson J W, Wadley H N G 2000 Metal Foams: A Design Guide (Boston: Elsevier Science)

    [15]

    Nagaki S, Sowerby R, Goya M 1991 Mater. Sci. Eng. A 142 163

    [16]

    Silva M G D A, Ramesh K T 1997 Mater. Sci. Eng. A 232 11

    [17]

    Simone A E, Gibson L J 1997 Mater. Sci. Eng. A 229 55

    [18]

    Han F S, Liu C S, Zhu Z G 1998 Acta Phys. Sin. 47 520 (in Chinese) [韩福生、刘长松、朱震刚 1998 物理学报 47 520]

    [19]

    Liu P S 2000 J. Adv. Mater. 32 9

    [20]

    Deshpande V S, Fleck N A 2000 J. Mech. Phys. Solids 48 1253

    [21]

    Badiche X, Forest S, Guibert T, Bienvenu Y, Bartout J D, Ienny P, Croset M, Bernet H 2000 Mater. Sci. Eng. A 289 276

    [22]

    Nieh T G, Higashi K, Wadsworth J 2000 Mater. Sci. Eng. A 283 105

    [23]

    Benouali A H, Froyen L, Delerue J F, Wevers M 2002 Mater. Sci. Tech. 18 489

    [24]

    Kwon Y W, Cooke R E, Park C 2003 Mater. Sci. Eng. A 343 63

    [25]

    Choe H, Dunand D C 2004 Mater. Sci. Eng. A 384 184

    [26]

    Liu P S, Sang H B 2004 Int. J. Iron Steel Res. 11 53

    [27]

    Liu P S 2006 Mater. Sci. Eng. A 422 176

    [28]

    Liu P S 2007 Materials Science Research Horizon (New York: NOVA Science Publishers) Chap 3

    [29]

    Liu P S 2007 Mater. Des. 28 2678

    [30]

    Liu P S 2009 Mater. Sci. Eng. A 507 190

    [31]

    Liu P S, Chen G F, Chen Y M 2009 Phil. Mag. Lett. 89 655

    [32]

    Liu P S 2010 Mater. Des. 31 2264

    [33]

    Liu P S 2010 Acta Phys. Sin. 59 4849 (in Chinese) [刘培生 2010 物理学报 59 4849]

    [34]

    Liu P S, Liang K M 2000 Mater. Sci. Tech. 16 575

    [35]

    Zhang W K, Li N Z, He D P 2005 J. Mater. Res. 15 1248

    [36]

    Liu P S 2006 Chin. J. Mater. Res. 20 64 (in Chinese) [刘培生 2006 材料研究学报 20 64]

    [37]

    Fan Q S 2008 Engineering Mechanics (Beijing: Machinical Industry Press) (in Chinese) [范钦珊 2008 工程力学 (北京:机械工业出版社)]

  • [1] Chen Yi-Cheng, Zhang Cheng-Long, Zhang Li-Chao, Qi Zhi-Mei. Terahertz surface plasmon polariton resonant sensing method based on grating coupled InSb. Acta Physica Sinica, 2024, 73(9): 098701. doi: 10.7498/aps.73.20231904
    [2] Wang Zhi-Huan, Jia Lei-Ming, He Zeng, Tian Zhou. Method of theoretically calculating spherical stress wave field in linear-hardening materials under impact load. Acta Physica Sinica, 2022, 71(1): 018301. doi: 10.7498/aps.71.20210954
    [3] Shao Chun-Rui, Li Hai-Yang, Wang Jun, Xia Guo-Dong. Thermal rectification enhancement based on porous structure in bulk materials. Acta Physica Sinica, 2021, 70(23): 236501. doi: 10.7498/aps.70.20211285
    [4] Zhang Quan-Zhi, Zhang Lei-Yu, Ma Fang-Fang, Wang You-Nian. Cryogenic etching of porous material. Acta Physica Sinica, 2021, 70(9): 098104. doi: 10.7498/aps.70.20202245
    [5] Shui Min, Yu Ming-Hai, Chu Gen-Bai, Xi Tao, Fan Wei, Zhao Yong-Qiang, Xin Jian-Ting, He Wei-Hua, Gu Yu-Qiu. Observation of ejecta tin particles into polymer foam through high-energy X-ray radiograpy using high-intensity short-pulse laser. Acta Physica Sinica, 2019, 68(7): 076201. doi: 10.7498/aps.68.20182280
    [6] Xi Tao, Fan Wei, Chu Gen-Bai, Shui Min, He Wei-Hua, Zhao Yong-Qiang, Xin Jian-Ting, Gu Yu-Qiu. Spall behavior of copper under ultra-high strain rate loading. Acta Physica Sinica, 2017, 66(4): 040202. doi: 10.7498/aps.66.040202
    [7] Chen Jun-Xiang, Yu Ji-Dong, Geng Hua-Yun, He Hong-Liang. Temperature and pressure calculation of porous materials. Acta Physica Sinica, 2017, 66(5): 056401. doi: 10.7498/aps.66.056401
    [8] Yan Da-Li, Li Shen-Yu, Liu Shi-Yu, Zhu Yun. Preparation and gas-sensing properties of the silver nanoparticles/porous silicon composite. Acta Physica Sinica, 2015, 64(13): 137102. doi: 10.7498/aps.64.137102
    [9] Yan Da-Li, Li Shen-Yu, Liu Shi-Yu, Zhu Yun. Preparation and gas-sensing properties of the silver nanoparticles/porous silicon composite. Acta Physica Sinica, 2015, 64(13): 137104. doi: 10.7498/aps.64.137104
    [10] Yu Yin, He Hong-Liang, Wang Wen-Qiang, Lu Tie-Cheng. The ability of porous brittle materials to absorb and withstand high energy density pulse. Acta Physica Sinica, 2015, 64(12): 124302. doi: 10.7498/aps.64.124302
    [11] Yang Shu-Min, Han Wei, Gu Jian-Jun, Li Hai-Tao, Qi Yun-Kai. Preparation and study of anodic alumina thin films with rainbow rings. Acta Physica Sinica, 2015, 64(7): 076102. doi: 10.7498/aps.64.076102
    [12] Cheng Sai, Lü Hui-Min, Cui Jing-Ya. Preparation of AlN/C composite foam through annealing recrystallization and its mechanical performance study. Acta Physica Sinica, 2012, 61(3): 036203. doi: 10.7498/aps.61.036203
    [13] Zhang Qiang, Hiroyuki Toda. Synchrotron K-edge subtraction imaging and its application to metallic foams. Acta Physica Sinica, 2011, 60(11): 114103. doi: 10.7498/aps.60.114103
    [14] Yao Xiao-Hu, Zhang Xiao-Qing, Han Qiang. Dynamic buckling of double-walled carbon nanotubesunder axial impact loading. Acta Physica Sinica, 2011, 60(9): 096202. doi: 10.7498/aps.60.096202
    [15] Lü Hui-Min, Shi Zhen-Hai, Zhao Chao, Wei Ping. Preparation and mechanism analysis of hollow microspheres/reticulated composite carbon foam. Acta Physica Sinica, 2010, 59(11): 7956-7960. doi: 10.7498/aps.59.7956
    [16] Liu Pei-Sheng. Analysis of shearing failure mode for porous materials under compression. Acta Physica Sinica, 2010, 59(7): 4849-4856. doi: 10.7498/aps.59.4849
    [17] Lü Hui-Min, Shi Zhen-Hai, Chen Guang-De. Synthesis of pure hexagonal phase aluminium nitride foam. Acta Physica Sinica, 2009, 58(9): 6403-6407. doi: 10.7498/aps.58.6403
    [18] Chen Gang-Jin, Xiao Hui-Ming, Xia Zhong-Fu. Charge storage characteristics in hybrid electret film consisting of porous PTFE and PP with negative corona charging. Acta Physica Sinica, 2006, 55(5): 2464-2469. doi: 10.7498/aps.55.2464
    [19] Liu Jing-Jing, Sun Jun-Jun, Hu Hai-Yun, Xing Xiu-San. The life prediction for materials under the corrosion of seawater. Acta Physica Sinica, 2005, 54(5): 2414-2417. doi: 10.7498/aps.54.2414
    [20] MA Dα-YOU, LI PEI-ZI, DAI GEN-HUA, WANG HONG-YU. THE OUTFLOW OF AIR FROM POROUS MATERIALS AND THE NOISE REDUCTION THEORY OF POROUS DIFFUSER. Acta Physica Sinica, 1978, 27(6): 631-644. doi: 10.7498/aps.27.631
Metrics
  • Abstract views:  8380
  • PDF Downloads:  944
  • Cited By: 0
Publishing process
  • Received Date:  07 February 2010
  • Accepted Date:  04 June 2010
  • Published Online:  05 June 2010

/

返回文章
返回