Search

Article

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

Simulation of solidification with phase-change in viscoelastic moldfilling process

Wang Fang Li Jun-Lin Yang Bin-Xin

Citation:

Simulation of solidification with phase-change in viscoelastic moldfilling process

Wang Fang, Li Jun-Lin, Yang Bin-Xin
PDF
Get Citation

(PLEASE TRANSLATE TO ENGLISH

BY GOOGLE TRANSLATE IF NEEDED.)

  • A gas-liquid two-phase model for the simulation of viscoelastic fluid mold filling process with the consideration of phase change is proposed, in which the governing equations for the melt and air in the cavity, including the mass conservation, momentum conservation and energy conservation equations, are unified into one system of equations. A revised enthalpy method, which can be used for both the melt and air in the mold cavity, is proposed to describe the phase change during the mold filling. Finite volume method on non-staggered grid is used to solve the system. The level set method is used to capture the interface evolution in the mold filling process. The distributions of physical quantities such as velocity, pressure and temperature and so on are given. The "frozen skin" layers under different temperatures and velocities are discussed in detail. Numerical results show that increasing the temperatures of the melt and cavity is a better way to get rid of the "frozen skin" layer than increasing the injection velocity.
    • Funds: Project supported by the National Natural Science Foundation of China (Grant No. 51078250), the Natural Science Foundation of Shanxi Province, China (Grant Nos. 2012011019-2, 2011011021-3), the Outstanding Graduate Innovation Project in Shanxi Province, China (Grant No. 20133117), and the Doctoral Sustentation Fund of Taiyuan University of Science and Technology, China (Grant No. 20112011).
    [1]

    Wang V W, Hieber C A, Wang K K 1986 J. Polym. Eng. 7 21

    [2]

    Chiang H H, Hieber C A, Wang K K 1991 Polym. Eng. Sci. 31 116

    [3]

    Kabanemi K K, Vaillancourt H, Wang H, Salloum G 1998 Polym. Eng. Sci. 38 21

    [4]

    Smith D E, Tortorelli D A, Tucker C L 1998 Comput. Method Appl. M. 167 325

    [5]

    Hetu J F, Gao D M, Garcia-Rejon A, Salloum G 1998 Polym. Eng. Sci. 38 223

    [6]

    Pichelin E, Coupez T 1998 Comput. Method Appl. M. 163 359

    [7]

    Kim S W, Turng L S 2006 Polym. Eng. Sci. 46 1263

    [8]

    Zhou H M, Geng T, Li D Q 2005 J. Reinf. Plast. Comp. 24 823

    [9]

    Chang R Y, Yang W H 2001 Int. J. Numer. Meth. Fl. 27 125

    [10]

    Zhou J, Turng L S 2007 Adv. Polym. Tech. 25 247

    [11]

    Khayat R E, Elsin W, Kim K 2000 Int. J. Numer. Meth. Fl. 33 847

    [12]

    Holm E J, Langtangen H P 1999 Comput. Method Appl. M. 178 413

    [13]

    Luoma J A, Voller V R 2000 Appl. Math. Model. 24 575

    [14]

    Soukane S, Trochu F 2006 Compos. Sci. Technol. 66 1067

    [15]

    Ayad R, Rigolot A 2002 J. Mech. Design 124 813

    [16]

    Geng T, Li D Q, Zhou H M 2006 Eng. Comput. Germany 21 289

    [17]

    Kim M S, Park J S, Lee W I 2003 Int. J. Numer. Meth. Fl. 42 791

    [18]

    Zhou H M, Yan B, Zhang Y 2008 J. Mater. Process. Tech. 204 475

    [19]

    Au C K 2005 Int. J. Mach. Tool. Manu. 45 115

    [20]

    Khor C Y, Ariff Z M, Che Ani F, Abdul Mujeebu M, Abdullah M K, Abdullah M Z, Joseph M A 2010 Int. Commun. Heat Mass 37 131

    [21]

    Yang B X, Ouyang J, Liu C T, Li Q 2010 Chinese J. Chem. Eng. 18 600 (in Chinese) [杨斌鑫, 欧阳洁, 刘春太, 李强 2010 化工学报 18 600]

    [22]

    Ao L, Wang W H, Chen J L, Gao S X, Wu G H 2001 Acta Phys. Sin. 50 793 (in Chinese) [敖玲, 王文洪, 陈京兰, 高淑侠, 吴光恒 2001 物理学报 50 793]

    [23]

    Zhang H Q 2001 Acta Phys. Sin. 50 528 (in Chinese) [张红群2001 物理学报 50 528]

    [24]

    Liu P, Yang T Q, Zhang L Y, Yao X 2000 Acta Phys. Sin. 49 2300 (in Chinese) [刘鹏, 杨同青, 张良莹, 姚熹 2000 物理学报 49 2300]

    [25]

    Li R X, Cheng Y M, Peng M J 2012 Chin. Phys. B 21 090205

    [26]

    Yang F, Zhu K Q 2010 Chin. Phys. Lett. 27 034601

    [27]

    Sussman M, Fatemi E, Smereka P, Osher S 1998 Comput. Fluids 27 663

    [28]

    Yang B X, Ouyang J 2012 Acta Phys. Sin. 61 234602 (in Chinese) [杨斌鑫, 欧阳洁 2012 物理学报 61 234602]

    [29]

    Verbeeten W M H, Peters G W M, Baaijens F T P 2001 J. Rheol. 45 823

    [30]

    Aboubacar M, Aguayo J P, Phillips P M, Phillips T N, Tamaddon-Jahromi H R, Snigerev B A, Webster M F 2005 J. Non-Newton. Fluid 126 207

    [31]

    Rubinstein L I 1994 The Stefan Problem (Providence: Providence Press) p56

    [32]

    Carslaw H S, Jaeger J S 1959 Conduction of Heat in Solids (Oxford: Oxford University Press) p113

    [33]

    Cahn J W, Hilliard J E 1958 J. Chem. Phys. 28 1015

    [34]

    Du L F, Zhang R, Xing H, Zhang L M, Zhang Y, Liu L 2013 Acta Phys. Sin. 62 106401 (in Chinese) [杜立飞, 张蓉, 邢辉, 张利民, 张洋, 刘林 2013 物理学报 62 106401]

    [35]

    Wang T, Li J J, Wang J C 2013 Acta Phys. Sin. 62 106402 (in Chinese) [王陶, 李俊杰, 王锦程 2013 物理学报 62 106402]

    [36]

    Krabbenhoft K, Damkilde L, Nazem M 2007 Int. Commun. Heat Mass 43 233

    [37]

    Kim S, Kim M C, Chun W G 2001 Korean J. Chem. Eng. 18 40

    [38]

    Caldwell J, Date A W 2003 Commun. Numer. Meth. En. 19 865

    [39]

    Luoma J A, Voller V R 2000 Appl. Math. Model. 24 575

    [40]

    Cao Y, Faghri A, Chang W S 1989 Int. Commun. Heat Mass 32 1289

    [41]

    Yang B, Fu X R, Yang W, Liang S P, Hu S, Yang M B 2009 Polym. Eng. Sci. 49 1234

    [42]

    Boronat T, Segui V J, Peydro M A, Reig M J 2009 J. Mater. Process Tech. 209 2735

    [43]

    Shen C Y 2009 Simulation of Injection Molding and Mold Optimization Design Theory and Method (Beijing: Science Press) p53 (in Chinese) [申长雨 2009 注塑成型模拟及模具优化设计理论与方法 (北京: 科学出版社)第53页]

  • [1]

    Wang V W, Hieber C A, Wang K K 1986 J. Polym. Eng. 7 21

    [2]

    Chiang H H, Hieber C A, Wang K K 1991 Polym. Eng. Sci. 31 116

    [3]

    Kabanemi K K, Vaillancourt H, Wang H, Salloum G 1998 Polym. Eng. Sci. 38 21

    [4]

    Smith D E, Tortorelli D A, Tucker C L 1998 Comput. Method Appl. M. 167 325

    [5]

    Hetu J F, Gao D M, Garcia-Rejon A, Salloum G 1998 Polym. Eng. Sci. 38 223

    [6]

    Pichelin E, Coupez T 1998 Comput. Method Appl. M. 163 359

    [7]

    Kim S W, Turng L S 2006 Polym. Eng. Sci. 46 1263

    [8]

    Zhou H M, Geng T, Li D Q 2005 J. Reinf. Plast. Comp. 24 823

    [9]

    Chang R Y, Yang W H 2001 Int. J. Numer. Meth. Fl. 27 125

    [10]

    Zhou J, Turng L S 2007 Adv. Polym. Tech. 25 247

    [11]

    Khayat R E, Elsin W, Kim K 2000 Int. J. Numer. Meth. Fl. 33 847

    [12]

    Holm E J, Langtangen H P 1999 Comput. Method Appl. M. 178 413

    [13]

    Luoma J A, Voller V R 2000 Appl. Math. Model. 24 575

    [14]

    Soukane S, Trochu F 2006 Compos. Sci. Technol. 66 1067

    [15]

    Ayad R, Rigolot A 2002 J. Mech. Design 124 813

    [16]

    Geng T, Li D Q, Zhou H M 2006 Eng. Comput. Germany 21 289

    [17]

    Kim M S, Park J S, Lee W I 2003 Int. J. Numer. Meth. Fl. 42 791

    [18]

    Zhou H M, Yan B, Zhang Y 2008 J. Mater. Process. Tech. 204 475

    [19]

    Au C K 2005 Int. J. Mach. Tool. Manu. 45 115

    [20]

    Khor C Y, Ariff Z M, Che Ani F, Abdul Mujeebu M, Abdullah M K, Abdullah M Z, Joseph M A 2010 Int. Commun. Heat Mass 37 131

    [21]

    Yang B X, Ouyang J, Liu C T, Li Q 2010 Chinese J. Chem. Eng. 18 600 (in Chinese) [杨斌鑫, 欧阳洁, 刘春太, 李强 2010 化工学报 18 600]

    [22]

    Ao L, Wang W H, Chen J L, Gao S X, Wu G H 2001 Acta Phys. Sin. 50 793 (in Chinese) [敖玲, 王文洪, 陈京兰, 高淑侠, 吴光恒 2001 物理学报 50 793]

    [23]

    Zhang H Q 2001 Acta Phys. Sin. 50 528 (in Chinese) [张红群2001 物理学报 50 528]

    [24]

    Liu P, Yang T Q, Zhang L Y, Yao X 2000 Acta Phys. Sin. 49 2300 (in Chinese) [刘鹏, 杨同青, 张良莹, 姚熹 2000 物理学报 49 2300]

    [25]

    Li R X, Cheng Y M, Peng M J 2012 Chin. Phys. B 21 090205

    [26]

    Yang F, Zhu K Q 2010 Chin. Phys. Lett. 27 034601

    [27]

    Sussman M, Fatemi E, Smereka P, Osher S 1998 Comput. Fluids 27 663

    [28]

    Yang B X, Ouyang J 2012 Acta Phys. Sin. 61 234602 (in Chinese) [杨斌鑫, 欧阳洁 2012 物理学报 61 234602]

    [29]

    Verbeeten W M H, Peters G W M, Baaijens F T P 2001 J. Rheol. 45 823

    [30]

    Aboubacar M, Aguayo J P, Phillips P M, Phillips T N, Tamaddon-Jahromi H R, Snigerev B A, Webster M F 2005 J. Non-Newton. Fluid 126 207

    [31]

    Rubinstein L I 1994 The Stefan Problem (Providence: Providence Press) p56

    [32]

    Carslaw H S, Jaeger J S 1959 Conduction of Heat in Solids (Oxford: Oxford University Press) p113

    [33]

    Cahn J W, Hilliard J E 1958 J. Chem. Phys. 28 1015

    [34]

    Du L F, Zhang R, Xing H, Zhang L M, Zhang Y, Liu L 2013 Acta Phys. Sin. 62 106401 (in Chinese) [杜立飞, 张蓉, 邢辉, 张利民, 张洋, 刘林 2013 物理学报 62 106401]

    [35]

    Wang T, Li J J, Wang J C 2013 Acta Phys. Sin. 62 106402 (in Chinese) [王陶, 李俊杰, 王锦程 2013 物理学报 62 106402]

    [36]

    Krabbenhoft K, Damkilde L, Nazem M 2007 Int. Commun. Heat Mass 43 233

    [37]

    Kim S, Kim M C, Chun W G 2001 Korean J. Chem. Eng. 18 40

    [38]

    Caldwell J, Date A W 2003 Commun. Numer. Meth. En. 19 865

    [39]

    Luoma J A, Voller V R 2000 Appl. Math. Model. 24 575

    [40]

    Cao Y, Faghri A, Chang W S 1989 Int. Commun. Heat Mass 32 1289

    [41]

    Yang B, Fu X R, Yang W, Liang S P, Hu S, Yang M B 2009 Polym. Eng. Sci. 49 1234

    [42]

    Boronat T, Segui V J, Peydro M A, Reig M J 2009 J. Mater. Process Tech. 209 2735

    [43]

    Shen C Y 2009 Simulation of Injection Molding and Mold Optimization Design Theory and Method (Beijing: Science Press) p53 (in Chinese) [申长雨 2009 注塑成型模拟及模具优化设计理论与方法 (北京: 科学出版社)第53页]

  • [1] Chen Xiao-Peng, Feng Jun-Peng, Hu Hai-Bao, Du Peng, Wang Ti-Kang. Lattice Boltzmann method based simulation of two dimensional bubble group ripening process. Acta Physica Sinica, 2022, 71(11): 110504. doi: 10.7498/aps.70.20212183
    [2] Lattice Boltzmann Simulation on Two Dimensional Vapour Bubble Ripening. Acta Physica Sinica, 2022, (): . doi: 10.7498/aps.71.20212183
    [3] Tian Chun-Ling, Liu Hai-Yan, Wang Biao, Liu Fu-Sheng, Gan Yun-Dan. Phase transition and equation of state of dense liquid nitrogen at high temperature and high pressure. Acta Physica Sinica, 2022, 71(15): 158701. doi: 10.7498/aps.71.20220124
    [4] Wang Wei, Jie Quan-Lin. Identifying phase transition point of J1-J2 antiferromagnetic Heisenberg spin chain by machine learning. Acta Physica Sinica, 2021, 70(23): 230701. doi: 10.7498/aps.70.20210711
    [5] Zhao Zhong-Hua, Qu Guang-Hao, Yao Jia-Chi, Min Dao-Min, Zhai Peng-Fei, Liu Jie, Li Sheng-Tao. Molecular dynamics simulation of phase transition by thermal spikes in monoclinic ZrO2. Acta Physica Sinica, 2021, 70(13): 136101. doi: 10.7498/aps.70.20201861
    [6] Ma Tong, Xie Hong-Xian. Formation mechanism of face-centered cubic phase in impact process of single crystal iron along [101] direction. Acta Physica Sinica, 2020, 69(13): 130202. doi: 10.7498/aps.69.20191877
    [7] Li Jun, Wu Qiang, Yu Ji-Dong, Tan Ye, Yao Song-Lin, Xue Tao, Jin Ke. Orientation effect of alpha-to-epsilon phase transformation in single-crystal iron. Acta Physica Sinica, 2017, 66(14): 146201. doi: 10.7498/aps.66.146201
    [8] Jiang Tao, Lu Wei-Gang, Ren Jin-Lian, Xu Lei, Lu Lin-Guang. Simulation of polymer filling process by an improved smoothed particle hydrodynamics method based on higher-order Taylor expansion. Acta Physica Sinica, 2016, 65(22): 220202. doi: 10.7498/aps.65.220202
    [9] Ren Jin-Lian, Lu Wei-Gang, Jiang Tao. Simulation and prediction of the weld-line in the filling process using a corrected smoothed particle hydrodynamics method. Acta Physica Sinica, 2015, 64(8): 080202. doi: 10.7498/aps.64.080202
    [10] Ren Sheng, Zhang Jia-Zhong, Zhang Ya-Miao, Wei Ding. Phase transition in liquid due to zero-net-mass-flux jet and its numerical simulation using lattice Boltzmann method. Acta Physica Sinica, 2014, 63(2): 024702. doi: 10.7498/aps.63.024702
    [11] Zhou Ping, Wang Xin-Qiang, Zhou Mu, Xia Chuan-Hui, Shi Ling-Na, Hu Cheng-Hua. First-principles study of pressure induced phase transition, electronic structure and elastic properties of CdS. Acta Physica Sinica, 2013, 62(8): 087104. doi: 10.7498/aps.62.087104
    [12] Li Xiao-Feng, Liu Zhong-Li, Peng Wei-Min, Zhao A-Ke. Elastic and thermodynamic properties of CaPo under pressure via first-principles calculations. Acta Physica Sinica, 2011, 60(7): 076501. doi: 10.7498/aps.60.076501
    [13] Liang Xiao-Lin, Gong Yue-Qiu, Liu Zhi-Zhuang, Lü Ye-Gang, Zheng Xue-Jun. Effect of external electric field on phase transitions of ferroelectric thin films. Acta Physica Sinica, 2010, 59(11): 8167-8171. doi: 10.7498/aps.59.8167
    [14] Dong Li-Fang, Yang Yu-Jie, Fan Wei-Li, Yue Han, Wang Shuai, Xiao Hong. Study on the phase transition of the filaments structure in dielectric barrier discharge. Acta Physica Sinica, 2010, 59(3): 1917-1922. doi: 10.7498/aps.59.1917
    [15] Shao Jian-Li, Qin Cheng-Sen, Wang Pei. Atomistic simulation of mechanical properties of martensitic transformation under dynamic compression. Acta Physica Sinica, 2009, 58(3): 1936-1941. doi: 10.7498/aps.58.1936
    [16] Chen Bin, Peng Xiang-He, Fan Jing-Hong, Sun Shi-Tao, Luo Ji. A thermo-elastoplastic constitutive equation including phase transformation and its applications. Acta Physica Sinica, 2009, 58(13): 29-S34. doi: 10.7498/aps.58.29
    [17] Shao Jian-Li, Wang Pei, Qin Cheng-Sen, Zhou Hong-Qiang. Shock-induced phase transformations of iron studied with molecular dynamics. Acta Physica Sinica, 2007, 56(9): 5389-5393. doi: 10.7498/aps.56.5389
    [18] Wang Hui, Liu Jin-Fang, He Yan, Chen Wei, Wang Ying, Gerward L., Jiang Jian-Zhong. Size-induced enhancement of bulk modulus and transition pressure of nanocrystalline Ge. Acta Physica Sinica, 2007, 56(11): 6521-6525. doi: 10.7498/aps.56.6521
    [19] Liu Hong, Wang Hui. Phase transition in biaxial nematic liquid crystal. Acta Physica Sinica, 2005, 54(3): 1306-1312. doi: 10.7498/aps.54.1306
    [20] Wang Zhen-Xia, Wang Sen, Hu Jian-Gang, Yu Guo-Jun. Preliminary structural study of multi-wall carbon nanotubes in a returning phase transition process. Acta Physica Sinica, 2005, 54(9): 4263-4268. doi: 10.7498/aps.54.4263
Metrics
  • Abstract views:  5176
  • PDF Downloads:  627
  • Cited By: 0
Publishing process
  • Received Date:  11 October 2013
  • Accepted Date:  07 January 2014
  • Published Online:  05 April 2014

/

返回文章
返回