搜索

x
中国物理学会期刊

金属平板前等离子体的电磁波功率反射系数计算分析

CSTR: 32037.14.aps.52.3102

Calculation and analysis on the wave reflected characteristics of plasma before the conductor plate

CSTR: 32037.14.aps.52.3102
PDF
导出引用
  • 把金属平板前非均匀等离子体层简化为分层均匀的平板模型,采用等效输入阻抗方法,计算大气或真空边界入射波的总功率反射系数,分析其影响因素.计算结果表明:电子数密度大 小、等离子体层厚度、入射波频率和入射角是功率反射系数的主要影响因素,适当调整其中任何一个,都可以达到降低功率反射系数的效果.在低频段,电子数密度的分布对功率反射系数几乎没有影响;在高频段,电子数密度的分布对功率反射系数有影响.等离子体厚度、入射波频率、电子数密度分布对功率反射系数的影响几乎与波的极化方向无关.

     

    Regarding the nonuniform plasma plate as uniform multilayer slabs, the total wave energy reflectance of the interface between the plasma before a conductor plate and the atmosphere or vacuum can be calculated by applying the equivalent input impedance method. The result obtained is that the reflection characteristics are affected by electron number density, plasma thickness, frequency and transmitting direction of the incident wave. Changing any factor of them, the total wave energy reflectance can be reduced greatly. In the low frequency band, the d istribution of electron number density almost does not affect the reflectance. B ut in the high frequency band, it will affect the reflectance. The effect of pla sma thickness, wave frequency, electron number density distribution on it is alm ost independent of the wave polarizing direction.

     

    目录

    /

    返回文章
    返回