搜索

x
中国物理学会期刊

溶胶-凝胶法制备的高压电常数(Bi0.5Na0.5)1-xBaxTiO3系无铅压电陶瓷

CSTR: 32037.14.aps.53.2357

Enhanced piezoelectric properties of (Bi0.5Na0.5)1-xBax TiO3 lead-free ceramics by sol-gel method

CSTR: 32037.14.aps.53.2357
PDF
导出引用
  • 测量了使用溶胶-凝胶工艺制备的(Bi0.5Na0.5)1-xBaxTiO3(x=0.00,0.04,0.06,0.08,0.12)系陶瓷的介电、压电、铁电和热释电性能.由于使用了溶胶-凝胶工艺制备的粉料,因此所有样品的压电性能都得到了较大提高.其中(Bi0.5Na0.5)0.94Ba0.06TiO.3系陶瓷具有该系列最大的压电常数,d33=173×10-12C/N,与传统工艺相比,d33提高了近40%.同时,在一定范围内,随Ba含量的增加,材料的剩余极化Pr和矫顽场Ec逐渐减小,退极化温度逐渐降低.对于(Bi0.5Na0.5)0.94Ba0.06TiO.3系陶瓷,剩余极化和矫顽场分别为25μC/cm2和28kV/cm,退极化温度约为80℃.

     

    The dielectric, piezoelectric, ferroelectric and pyroelectric properties of (Bi0.5Na0.5)1-xBaxTiO3 (x=0.00,0.04,0.06,0.08, 0.12) ceramics prepared by sol-gel method were investigated. It was found that all the samples in this experiment show improved piezoelectric properties,obtained by using this chemical method. For(Bi0.5Na0.5)0.94Ba0.06TiO3 ceramic, as its composition is near the morphotropic phase boundary (MPB), it shows the largest piezoelectric constant, d33=173×10-12C/N, which is about 40% improvement compared to the conventional processed ceramics in this system. In addition, from the ferroelectric and pyroelectric measurements, the remanent polarization Pr, coercive field Ec and depolarization temperature Td of the (Bi0.5Na0.5)0.94Ba0.06TiO3 ceramic were found to be 25μC/cm2, 28kV/cm, and 80℃, respectively.

     

    目录

    /

    返回文章
    返回