搜索

x
中国物理学会期刊

绝缘衬底上高密度均匀纳米硅量子点的形成与表面形貌

CSTR: 32037.14.aps.53.4293

The formation of highdensity uniform silicon nanocrystalson insulator substrate and their surface morphology*

CSTR: 32037.14.aps.53.4293
PDF
导出引用
  • 利用等离子体增强化学气相淀积技术,在绝缘氮化硅(SiNx)衬底上制备超薄非晶硅(aSi:H)薄膜,通过超短脉冲激光辐照与准静态常规热退火技术处理,制备出高密度、均匀纳米硅(ncSi)量子点.使用原子力显微镜对处理前后样品的表面形貌进行了研究,发现激光辐照能量密度增加的同时,所形成的ncSi尺寸也随之增加.在合适的能量密度范围内,可以得到面密度大于10.11cm^2、尺寸分布标准偏差小于20%的10 nm ncSi量子点薄膜,表明所制备的ncSi量子点具有较好的均匀性及较高的面密度.同时,对ncS i量子点

     

    The method of pulsed laser induced nucleation combined with furnace annealing for crystal growth is successfully performed to fabricate uniform silicon nanocrys tals with high density from initial hydrogen amorphous silicon(aSi:H) ultra th in film, deposited by a plasmaenhanced chemical vapor deposition system. Ato mic force microscopy was employed to characterize the morphological modifications of samples. It is shown that the size of ncSi is increased as the laser fluence increased. Nano crystal silicon dots with lateral sizes of~10 nm in dia meter, size deviation less than 20% and with surface density about 10.11/cm2 are obtained. The growth mechanism of ncSi dots is also briefly discus sed.

     

    目录

    /

    返回文章
    返回