搜索

x
中国物理学会期刊

SrTiO3金属-绝缘体-半导体结构的介电与界面特性

CSTR: 32037.14.aps.54.1390

Dielectric and interface characteristics of SrTiO3 with a MIS structure

CSTR: 32037.14.aps.54.1390
PDF
导出引用
  • 采用金属有机分解法在p型Si衬底上制备了SrTiO3(STO)薄膜.研究了STO薄膜金属绝缘体半导体(MIS)结构的介电和界面特性.结果表明,STO薄膜显示出优异的介电性能,在10kHz处的介电常数约为105,损耗低于001,这来源于多晶结构和良好的结晶性;MIS结构中的固定电荷密度Nf和界面态密度Dit分别约为15×1012cm-2和(14—35)×1012cm-2eV-1,这主要与Si/STO界面处形成的低介电常数界面层有关.

     

    SrTiO3 (STO) films were deposited onto the ptype Si substrates by metalorganic decomposition (MOD) technique. The dielectric and interface characteristics of STO with a metalinsulatorsemiconductor(MIS) structure were investigated. The results showed that the dielectric constant was about 105 and the dissipation factor was lower than 001 for our STO films at a frequency of 10kHz. The excellent dielectric properties were attributed to the polycrystalline structure with good crystallinity. The fixed charge density Nf and the interfacetrap density Dit were calculated to be about 15×1012cm-2 and (14—35)×1012cm-2eV-1, respectively. Both Nf and Dit were mainly connected with an interface layer with low dielectric constant formed at the interface of Si/STO.

     

    目录

    /

    返回文章
    返回