-
用两步固相反应法合成了p型Ba填充方钴矿化合物Ba0.3FeCo3S b12,并采用放电等离子烧结法(SPS)制备了Ba0.3FeCo3Sb12/多壁碳纳米管复合材料. 研究了Ba0.3FeCo3Sb12/多壁碳纳米管复合 材料的结构及多壁碳纳米管对 其热电性能的影响规律:SEM分析表明多壁碳纳米管比较均匀地分布在Ba0.3 FeCo3S b12基体中;随着碳纳米管添加量的增加,Ba0.3FeCo3Sb12/多壁碳 纳米管复合材料的电导率下降、塞贝克系数略微下降、晶格热导率大幅度降低,当碳纳米管 含量为5%时其晶格热导率最小;当碳纳米管的含量为3%时,本研究得到的Ba0.3FeCo3Sb12/碳纳米管复合材料的最大ZT值达078.The p_type Ba_filled Ba0.3FeCo3Sb12 skutterudite compounds were synthesized using a two_step solid_state reaction method, and the Ba0.3FeCo3 Sb12/multiwalle carbon nanotubes composites were prepared by spark plasma sintering (SPS). The structure of Ba0.3FeCo3Sb12/multi walled carbon nanotube composites and effect of multiwalled carbon nanotubes on the thermoelectric properties of p_type Ba0.3FeCo3Sb12 compounds w ere investigated. The dispersed distribution of multiwalled carbon nanotubes in the Ba0.3Fe Co3Sb12 compounds was observed by SEM. With increasing content of multiwal led carbon nanotubes, the electrical conductivity of the Ba0.3FeCo 3Sb12 compounds decreased, Seebeck coefficient reduced slightly and the lattice thermal conductivity decreased significantly. The minimum of lattice thermal conductivity was obtained when the content of carbon nanotubes was 5%. When the content of carbon nanotubes was 3%, the maximal ZT value of 078 was obtained for Ba0.3FeCo3Sb12/multiwalled carbon nanot ube composites at 850K.
-
Keywords:
- Skutterudite /
- multiwalled carbon nanotubes /
- electrical conductivity /
- Seebeck coefficient /
- lattice thermal conductivity







下载: