搜索

x
中国物理学会期刊

微小孔径激光器的工艺及器件功率和寿命特性分析

CSTR: 32037.14.aps.54.5609

Fabrication process and power and lifetime characteristics of very-small-aperture laser

CSTR: 32037.14.aps.54.5609
PDF
导出引用
  • 在650nm波长半导体激光器的基础上制造出了高输出功率的微小孔径激光器.驱动电流为25mA时, 输出功率达到0.4mW,最大功率可达1mW以上.叙述了微小孔径激光器的特殊的制造工艺,并分析了器件可能的失效机理.

     

    High output power very-small-aperture laser has been created on 650nm edge emitting laser diodes.The far-field output power is 0.4mW at the 25mA driving current,and the highest output power exceeds 1mW. The special fabrication process is described and the failure mechanism leading to the short lifetime of the devices is discussed.

     

    目录

    /

    返回文章
    返回