搜索

x
中国物理学会期刊

溶胶-凝胶法制备Sr2Bi4Ti5O18薄膜及其铁电性能研究

CSTR: 32037.14.aps.55.3086

Ferroelectric properties of Sr2Bi4Ti5O18 thin films prepared by sol-gel method

CSTR: 32037.14.aps.55.3086
PDF
导出引用
  • 采用溶胶-凝胶法,在氧气氛中和层层晶化的工艺条件下,成功地制备了沉积在Pt/Ti/SiO2/Si(100)衬底上的铁电性能优良的Sr2Bi4Ti5O18 (SBTi)薄膜,并研究了SBTi薄膜的微结构、表面形貌、铁电性能和疲劳特性.研究表明:薄膜具有单一的层状钙钛矿结构,且为随机取向;薄膜表面光滑,无裂纹,厚度约为725nm;铁电性能测试显示较饱和、方形的电滞回线,当外电场强度为275kV/cm时

     

    High quality Sr2Bi4Ti5O18 (SBTi) ferroelectric thin films on Pt/Ti/SiO2/Si(100) substrates were successfully prepared using the sol-gel method.The microstructure, ferroelectric properties and fatigue characteristics of SBTi thin films were investigated.The results show that the films with smooth surface are of single phase of SBTi and randomly oriented. The well-saturated ferroelectric hysteresis loops and the fatigue properties were obtained by hysteresis measurements using a metal-ferroelectric-metal structure. The remnant polarization (2Pr) and coercive field (2Ec) reached to 24.0μC/cm2 and 137.8kV/cm, respectcively in the electric field of 275kV/cm. No fatigue was observed up to 4.4×1010 switching cycles.

     

    目录

    /

    返回文章
    返回