搜索

x
中国物理学会期刊

Mo掺杂SrBi4Ti4O15陶瓷的铁电介电性能

CSTR: 32037.14.aps.55.3716

Ferroelectric and dielectric properties of Mo-doped SrBi4Ti4O15 ceramics

CSTR: 32037.14.aps.55.3716
PDF
导出引用
  • 用传统的固相烧结工艺,制备了钼掺杂铁电陶瓷样品SrBi4Ti4O15(SBTi)铁电陶瓷SrBi4-2x/3Ti4-xMoxO15(x=0.00,0.003,0.012,0.03,0.06,0.09).X射线衍射的结果表明,样品均为单一的层状钙钛矿结构相,Mo掺杂未改变SBTi的晶体结构.通过扫描电子显微镜观测发现,样品晶粒为片状,随掺杂量的增加,晶粒逐

     

    The ferroelectric ceramics samples of SrBi4-x/3Ti4-xMoxO15(x=0.00, 0.003, 0.012, 0.03, 0.06, 0.09) have been prepared by the conventional solid-state reaction method. X-ray diffraction analysis shows that the crystal structure of SrBi4Ti4O15 (SBTi) is not affected by Mo-doping. The scanning electronics microscope (SEM) images indicate that all the samples consist of sheet grains and the grain size is reduced by Mo-doping while the ferroelectric properties are improved significantly. The remanent polarization (2Pr) increases at first,then decreases with the increasing Mo content. At x=0.06, the 2Pr maximizes at a value of 26.5 μC/cm2, which about 117% higher in comparison with that of SBTi. And the coercive field of SBTi is increased only about 20%. The Curie temperature of the samples varied slightly after doping, which implies that the good thermal stability of SBTi is not sacrificed.

     

    目录

    /

    返回文章
    返回