-
为研究钆锆烧绿石固化Pu(Ⅳ)的相变化情况及化学稳定性, 以Gd2O3, ZrO2为原料, Ce(Ⅳ)作为Pu(Ⅳ)的模拟替代物质, 采用冷压热烧结的方法制备出Gd2Zr2-xCexO7(0≤ x≤ 2.0)系列样品. 分别在40 °C和70 °C的合成海水中, 对固化体的长期浸出性能进行研究. 借助粉末X射线衍射仪对所制备样品的物相信息进行收集, 利用等离子体质谱仪对固化体的浸出浓度数据进行分析. 研究结果表明: 当x ≤0.08时, 固化体保持为烧绿石相; 当x>0.08时, 固化体转变为具有缺陷的萤石型结构相. 固化体中Gd3+, Zr4+和Ce4+在合成海水中, 随着浸泡时间的延长浸出浓度逐渐上升, 70 °C下的浸出浓度高于40 °C下的浸出浓度. 在42 d时, 固化体中Gd3+的最大浸出浓度在0.032 μg·ml-1以下, Zr4+的最大浸出浓度在0.003 μg·ml-1以下; Ce4+的最大浸出浓度在0.032 μg·ml-1以下.In order to investigate phase change and chemical stability of pyrochlore Gd2Zr2O7 used for immobilizing Pu(Ⅳ), tetravalent cerium is used as the simulacrums for plutonium with tetravalence, and Gd2Zr2-xCexO7(0≤ x≤ 2.0) series samples are successfully synthesized by high temperature solid reaction and using Gd2O3 and ZrO2 powders as starting materials. The experiments of long-term chemical stability are conducted in synthetic seawater at 40 °C and 70 °C separately. The XRD diffractive data and extraction ratio of as-gained samples are collected by the help of X-ray diffraction (XRD) instrument and inductively coupled plasma mass spectrometry. The results indicate that the phases of compounds change from pyrochlore to fluorite-type phase when the value of x is more than 0.08. Extraction ratios of Gd3+, Zr4+ and Ce4+ in waste forms increase with the increase of immersion time in synthetic seawater. The extraction ratio of waste form at 70 °C is higher than at 40 °C. The highest extraction ratios of Gd3+, Zr4+ and Ce4+ for 42 days are no more than 0.032, 0.003 and 0.032 μg·ml-1 respectively.
-
Keywords:
- pyrochlore Gd2Zr2O7 /
- waste forms /
- phase /
- chemical stability







下载: