搜索

x
中国物理学会期刊

电荷失配对SiC半超结垂直双扩散金属氧化物半导体场效应管击穿电压的影响

CSTR: 32037.14.aps.63.208501

Influence of charge imbalance on breakdown voltage of 4H-SiC semi-superjunction VDMOSFET

CSTR: 32037.14.aps.63.208501
PDF
导出引用
  • SiC半超结垂直双扩散金属氧化物半导体场效应管(VDMOSFET)相对于 常规VDMOSFET在相同导通电阻下具有更大击穿电压. 在N型外延层上进行离子注入形成半超结结构中的P柱是制造SiC半超结VDMOSFET 的关键工艺. 本文通过二维数值仿真研究了离子注入导致的电荷失配对4H-SiC超结和半超结VDMOSFET 击穿电压的影响,在电荷失配程度为30%时出现半超结VDMOSFET的最大击穿电压. 在本文的器件参数下,P柱浓度偏差导致击穿电压降低15%时,半超结VDMOSFET柱区浓度偏差范围相对于超结VDMOSFET可提高69.5%,这意味着半超结VDMOSFET对柱区离子注入的控制要求更低,工艺制造难度更低.

     

    SiC semi-superjunction vertical double diffused MOS (VDMOSFET) has higher breakdown voltage than conventional SiC VDMOSFET with the same on-resistance. The ion implantation to form p pillar region on N-type epilayer is a key process to form semi-superjunction stucture. The influences of charge imbalance induced by ion implantation on breakdown voltages of 4H-SiC superjunction and semi-superjunction VDMOSFET are investigated through two-dimensional numerical simulation, and the largest breakdown voltage is obtained when charge imbalance is 30%. With the same structure parameters of devices, when breakdown voltage decreases by 15% due to the deviation of doping concentration in P pillars, the tolerance of doping concentration for the semi-superjunction VDMOSFET is 69.5% higher than for superjunction VDMOSFET which means that less precise process control of ion implantation for semi-superjunction VDMOSFET, will be required with less difficulty in the manufacture of pillars.

     

    目录

    /

    返回文章
    返回