搜索

x
中国物理学会期刊

三维浅海下弹性结构声辐射预报的有限元-抛物方程法

CSTR: 32037.14.aps.68.20181452

Acoustic radiation from a cylinder in shallow water by finite element-parabolic equation method

CSTR: 32037.14.aps.68.20181452
PDF
HTML
导出引用
  • 利用多物理场耦合有限元法对结构和流体适应性强、抛物方程声场计算高效准确的特点, 提出了三维浅海波导下弹性结构声振特性研究的有限元-抛物方程法. 该方法采用多物理场耦合有限元理论建立浅海下结构近场声辐射模型, 计算局域波导下结构声振信息, 并提取深度方向上复声压值作为抛物方程初始值; 然后采用隐式差分法求解抛物方程以步进计算结构辐射声场. 重点介绍了该方法对浅海下结构声辐射计算的准确性、高效性以及快速收敛性后, 对Pekeris波导中有限长弹性圆柱壳的声振特性进行了分析. 研究得出, 当圆柱壳靠近海面(海底)时, 其耦合频率比自由场下的要高(低), 当潜深达到一定范围时, 与自由场耦合频率基本趋于一致; 在低频远场, 结构辐射场与同强度点源声场具有一定的等效性, 且等效距离随着频率增加而增加; 由于辐射声场受结构振动模态、几何尺寸和简正波模式影响, 结构辐射场传播的衰减规律按近场声影响区、球面波衰减区、介于球面波和柱面波衰减区、柱面波衰减区四个扩展区依次进行.

     

    It can be a difficult problem to precisely predict the acoustic field radiated from a finite elastic structure in shallow water channel because of its strong coupling with up-down boundaries and the fluid medium, whose acoustic field cannot be calculated directly by existing methods, such as Ray theory, normal mode theory and other different methods, which are adaptable to sound fields from idealized point sources in waveguide. So, there is no reliable research method of predicting the acoustic radiation of elastic structure in shallow water at present. Based on the finite element method (FEM) coupled with the parabolic equation (PE), the theoretical model for structure acoustic radiation in shallow water at low frequency is established in this paper. This model mainly consists of three sections. First, obtaining the near-field vibro-acoustic characteristics of the elastic structure in shallow water by the multi-physics coupling model established by FEM, whose FEM model includes the up-down boundaries and the completely absorbent sound boundaries in the horizontal direction. Second, getting the acoustic information in the depth, which is set as the acoustic input condition i.e. starting field for the PE. Third, the acoustic information in the far-field quickly calculated by the PE and the finite difference method (FDM). The accuracy, efficiency and fast convergence of FEM-PE method are validated by numerical simulation and theoretical analysis through using a monopole source and structural source in the Pekeris waveguide, respectively. The vibro-acoustic characteristics of elastic cylinder influenced by upper and lower fluid boundaries of the Pekeris waveguide are calculated and analyzed. The cylindrical shell material is steel, and it is 1 m in radius and 10 m in length. The shallow water channel is a Pekeris waveguide with 30 m in depth, at the upper boundary, i.e., the free surface, the lower boundary is the semi-infinite liquid boundary. The analyzed frequencies range from 50 Hz to 200 Hz. The study shows that when the cylindrical shell approaches to the sea surface or bottom, the coupled frequency is higher or lower respectively than that of the shell immersed in the free field. When the diving depth reaches a certain distance range, the coupled frequency tends to be the same as that in free field. The acoustic field radiated from an elastic shell in Pekeris waveguide is similar to that from a point source at low frequency, but there exists a significant difference in high frequency between them, so the structural source can be equivalent to a point source conditionally. The sound radiation attenuation of the structure happens in sequence according to the near-field acoustic shadow zone, the spherical wave attenuation zone, the region between spherical wave and the cylindrical wave attenuation zone, and the cylindrical wave attenuation zone.

     

    目录

    /

    返回文章
    返回