搜索

x
中国物理学会期刊

基于双路光电反馈下光注入半导体激光器的高性能线性调频信号产生

CSTR: 32037.14.aps.71.20221308

High-performance linear frequency-modulated signal generation based on optically injected semiconductor laser with dual-loop optoelectronic feedback

CSTR: 32037.14.aps.71.20221308
PDF
HTML
导出引用
  • 提出了一种基于双路光电反馈下, 光注入半导体激光器的高性能微波线性调频信号产生方案, 并进行了实验验证. 在合适的注入参数下, 光注入半导体激光器可工作于单周期振荡态, 生成频率由注入强度和失谐频率决定的可调谐微波信号. 通过加载波形为类三角波的电压信号控制注入强度, 光注入半导体激光器可生成宽带微波线性调频信号. 进一步通过引入延时匹配的双路光电反馈环路, 来提升光注入半导体激光器生成线性调频信号的质量: 分别基于傅里叶域模式锁定原理和自注入锁定技术, 引入短环光电反馈和长环光电反馈, 以同时实现线性调频信号的梳齿信噪比提升和线宽窄化. 在验证实验中, 本方案产生了带宽为8 GHz (18—26 GHz)的线性调频信号, 其梳齿信噪比达到40 dB, 梳齿线宽为1 kHz. 实验结果证明了本方案能够生成同时具有大带宽、高梳齿信噪比、窄线宽且相位关系稳定的高性能微波线性调频信号.

     

    Linear frequency-modulated (LFM) waveforms have numerous applications in high-resolution radar detection, high-speed wireless communication, and high precision measurement. The generation of LFM microwave signals based on conventional electronic technologies is limited in their center frequency and bandwidth, which are usually less than a few gigahertz. Fortunately, the inherently large bandwidth offered by photonic technology is very hopeful of breaking through the electronic bottleneck. A variety of photonics-based approaches to generating the LFM waveforms have been reported, including the frequency-to-time mapping method and the external modulation method. However, these solutions suffer poor tunability or expensive RF sources. In recent years, the LFM waveform generation based on optically injected semiconductor lasers (OISLs) has attracted increasing attention. By introducing a low-speed electrical signal to control the period-one (P1) dynamics of an OISL, the LFM waveforms with a large bandwidth are generated. Nonetheless, the generated microwave signal has poor spectral purity, which restricts its many practical applications.
    In this work, a high-performance microwave LFM waveform generation scheme based on an OISL with dual-loop optoelectronic feedback is proposed and demonstrated experimentally. In this scheme, the optical injection strength of an OISL is controlled first by a triangular-like voltage signal to generate LFM waveforms with a large bandwidth. Then, the quality of the generated LFM signal is comprehensively improved by introducing a delay-matched dual-loop optoelectronic feedback structure. Based on the Fourier domain mode locking principle (FDML) and the self-injection locking technique, both a short-delay optoelectronic feedback loop and a long-delay optoelectronic feedback loop are introduced to simultaneously improve the spectral purity and phase stability of the generated LFM signals. In the proof-of-concept experiment, by analyzing the spectral quality and phase deviation of the generated LFM signal, a comb contrast of 40 dB, a comb linewidth of 1 kHz, and a phase deviation ∆φ of less than π/3 are simultaneously obtained. In addition, the parameters such as bandwidth and center frequency of the generated LFM signal generated can be flexibly tuned, and an LFM signal with a large bandwidth up to 8 GHz (18–26 GHz) is generated in the experiment. The proposed scheme features a simple and compact structure, high spectral quality and flexible tuning, thus may find applications in broadband radar and high-speed communication systems.

     

    目录

    /

    返回文章
    返回