Quantum heat engines provide a controllable setting for investigating how discrete energy levels, coherence, fluctuations, and information influence energy conversion at microscopic scales. Trapped ions are particularly suitable for this purpose because their internal states, quantized motion, and environmental couplings can be independently controlled, while fluorescence detection and sideband spectroscopy provide access to the working medium and its output load. This review examines the development of trapped-ion quantum heat engines, emphasizing the connection between experimentally implemented cycles, the resources supplied to them, and the useful energy obtained at their output. We first introduce the coupling between internal and motional degrees of freedom, open-system dynamics, quantum Otto cycles, and the definitions of heat, work, and ergotropy, with explicit attention to the assumptions and system boundaries underlying energy accounting. Representative implementations are then compared according to their working media, input resources, output degrees of freedom, and measured observables. These include internal-state two-level engines, motional engines, spin-driven quantum flywheels, cyclic charging of quantum loads, and devices using two-ion entangled working media. The reviewed experiments characterize engine output through complementary approaches, including population-based reconstruction of effective work, measurements of mechanical output, and quantum-state characterization of explicit loads. They also show why an increase in stored energy alone is insufficient to establish an increase in useful work: coherent motion and random excitation can accumulate simultaneously, and the ergotropy must be evaluated from the load state. Likewise, the reviewed two-ion experiment shows that stronger entanglement in the working medium can increase the load ergotropy without a corresponding improvement in energy-conversion efficiency. We next discuss squeezed reservoirs, finite-time coherent control, Liouvillian exceptional points, and measurement feedback. Squeezed reservoirs supply both thermal energy and an ordered contribution, requiring resource accounting beyond that used for equilibrium heat baths. Nonadiabatic transitions can either reduce or enhance output depending on the initial state, coherence, and feedback protocol, whereas dissipative control modifies the transient population dynamics and the path dependence of effective cycle work. Measurement-based schemes further distinguish information-assisted energy transfer from energy supplied directly by measurement backaction. Throughout these comparisons, we distinguish experimentally reconstructed effective work and intrinsic cycle power from quantities that include all preparation, detection, cooling, and reset operations. This perspective identifies consistent resource accounting and load-state characterization as essential to evaluating quantum performance gains. Finally, we discuss the challenges of extracting stored ergotropy through realizable operations, resolving work fluctuations and correlations across cycles, exploiting environmental memory, and extending present devices to interacting multi-ion systems. These directions connect demonstrations of microscopic cycles to the broader goal of controllable and verifiable quantum energy conversion.