-
为更好地理解低气压、弱电离条件下潘宁离子源放电过程中离子和电子的动力学行为, 通过建立二维轴对称模型, 采用粒子模拟与蒙特卡罗相结合(PIC/MCC)的方法, 考虑了电子与氢气之间的弹性碰撞、激发、电离以及氢原子、离子之间的弹性碰撞和电荷交换等过程, 对微型氢气潘宁离子源放电和引出过程进行了数值研究. 考察了磁场位形、壁面二次电子发射系数、引出电压和充气压力对放电过程的影响, 得到了实验中难以诊断得到的放电腔内电子与离子数密度分布, 阳极电流、引出极离子电流、单原子氢离子比例和双原子氢离子比例等宏观参数与实验结果相一致. 通过仿真使得对氢气潘宁放电机制的研究从定性过渡到定量, 这对于潘宁离子源的设计和改进具有重要意义.In order to better comprehend the dynamic behaviours of ion and electron during the Penning source discharge process under a low pressure and weak ionization condition, numerical simulation is carried out to study the penning source discharge and diffuse process. For constituting 2D axial symmetrical model and combining the particle simulation and Monte Carlo (PIC/MCC) method, elastic collision, excitation, and ionization reactions between electrons and hydrogen molecules, hydrogen atom and ions are taken into account. The effect of magnetic field configuration, secondary electron emission coefficient, derivational voltage, and gas pressure on the discharge characteristics is investigated. It has been found that the simulant discharge parameters, including electron and ion densities, anodic current and ionic current, H+ and H2+ densities, etc, are in good agreement with the experimental results. Based on our numerical simulation, the study of the hydrogen penning discharge is being changed from qualitative analysis to quantitative calculation, which is important for the design and optimization of the penning ion source.
-
Keywords:
- penning discharge /
- hydrogen /
- particle simulation /
- Monte Carlo
[1] Zhang H S 1997 Ion Source and Neutral Beam Source (Beijing: Atomic Energy Press) p125
[2] Wan R Y 2007 MS Thesis (China Academy of Engineering Physics) (in Chinese) [万瑞芸 2007 硕士学位论文 (绵阳: 中国工程物理研究院)]
[3] Wan R Y, Tan X H, Xiao K X, Jin D Z 2009 Mechanical & Electrical Engineering Technology 38 17 (in Chinese) [万瑞芸, 谈效华, 肖坤祥, 金大志 2009 机电工程技术 38 17]
[4] Xiao K X, Zhou M G, Tan X H 2003 Vacuum Electronics 2003(6) 26 (in Chinese) [肖坤祥, 周明贵, 谈效华 2003 真空电子技术 2003(6) 26]
[5] Xiao K X, Zhou M G, Tan X H, Mei L, Liang C 2005 Nuclear Techniques 28 550 (in Chinese) [肖坤祥, 周明贵, 谈效华, 梅林, 梁川 2005 核技术 28 550]
[6] Xiao K X, Sun S, Tan X H, Jing D Z 2009 Well Logging Technolog 33 493 (in Chinese) [肖坤祥, 孙山, 谈效华, 金大志 2009 测井技术 33 493]
[7] Jin D Z, Yang Z H, Xiao K X, Dai J Y 2009 Plasma Science and Technology 11 48
[8] Phelps A V 1990 J.Phys. Chem. Ref. Data 19 653
-
[1] Zhang H S 1997 Ion Source and Neutral Beam Source (Beijing: Atomic Energy Press) p125
[2] Wan R Y 2007 MS Thesis (China Academy of Engineering Physics) (in Chinese) [万瑞芸 2007 硕士学位论文 (绵阳: 中国工程物理研究院)]
[3] Wan R Y, Tan X H, Xiao K X, Jin D Z 2009 Mechanical & Electrical Engineering Technology 38 17 (in Chinese) [万瑞芸, 谈效华, 肖坤祥, 金大志 2009 机电工程技术 38 17]
[4] Xiao K X, Zhou M G, Tan X H 2003 Vacuum Electronics 2003(6) 26 (in Chinese) [肖坤祥, 周明贵, 谈效华 2003 真空电子技术 2003(6) 26]
[5] Xiao K X, Zhou M G, Tan X H, Mei L, Liang C 2005 Nuclear Techniques 28 550 (in Chinese) [肖坤祥, 周明贵, 谈效华, 梅林, 梁川 2005 核技术 28 550]
[6] Xiao K X, Sun S, Tan X H, Jing D Z 2009 Well Logging Technolog 33 493 (in Chinese) [肖坤祥, 孙山, 谈效华, 金大志 2009 测井技术 33 493]
[7] Jin D Z, Yang Z H, Xiao K X, Dai J Y 2009 Plasma Science and Technology 11 48
[8] Phelps A V 1990 J.Phys. Chem. Ref. Data 19 653
计量
- 文章访问数: 6446
- PDF下载量: 997
- 被引次数: 0