搜索

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

电流密度对微米硅电极断裂行为的影响

张兴玉

引用本文:
Citation:

电流密度对微米硅电极断裂行为的影响

张兴玉

Effects of current density on fracture behaviors for micron-sized crystalline silicon electrodes

Zhang Xing-Yu
PDF
HTML
导出引用
  • 高容量硅电极在脱/嵌锂过程中所发生的大体积变形、断裂行为会引起严重的力学衰减, 并导致电极的电化学性能退化. 这严重制约着硅电极材料在商业锂离子电池中的应用. 目前, 硅电极断裂行为的一些细节还未被彻底研究清楚. 为了进一步研究微米硅电极的断裂行为, 本文利用光学显微镜观测了单晶硅电极的形貌演化, 分析了不同电流密度下硅电极的断裂行为, 并重点研究了在不同电流密度下裂纹形成时硅电极的相对嵌锂深度. 结果表明, 电流密度越大, 硅电极断裂越严重. 但是在三种不同电流密度下, 裂纹形成时硅电极相对嵌锂深度差异不大(18%—22%). 这可能是由于微米硅电极各向异性变形所引起的局部应力集中在主导着断裂行为. 这些实验结果与有限元模型预测结果一致. 结合裂纹形成时锂化硅和晶体硅的界面位置以及力学模型, 讨论了裂纹形成时锂化硅层内部应力分布状态. 这些结果深化了对硅电极断裂行为的认识, 并为硅电极的设计和合适的脱/嵌锂速率选择提供一定的指导.
    The large volume change during lithiation/delithiation leads the silicon electrodes in lithium-ion batteries to severely degrade the mechanical performance and the silicon electrodes in lithium-ion batteries to further deteriorate electrochemical properties, which limits the commercial applications of silicon electrodes. After several year’s studies, the whole process of fracture for crystalline silicon anodes has been almost understood. However, the relationship between fracture behaviors and the lithiation depth has not been sufficiently studied. In this work, the in-situ observations of morphological changes (e.g., volume expansion, crack initiation, propagation, and debonding of lithiated silicon) during lithiation at the different current densities are reported for silicon micropillars fabricated by standard photolithography and a deep reactive ion etching process. Also, this work focuses on the relative depth of lithiation of silicon electrodes at the moment of crack initiation, which is one of the crucial parameters representing the utilization of active materials with no crack. The results show that the silicon micropillars are broken faster (i.e., crack initiation and pulverization in a shorter lithiation time) and more seriously at a large current density, exhibiting more prominent symmetry of morphology. However, the relative depths of lithiation at the different current densities have just a slight difference (i.e., 18%–22%), when cracks are initiated. Here in this work, a silicon micropillar fracture is confirmed by the optical observation, while the relative depth of lithiation is calculated according to the capacity data recorded by the charge/discharge battery test system. The small fluctuation of the relative depth of lithiation with the large wave of current density can be ascribed to the dominant role of local stress concentration caused by anisotropic volume change in fracture behavior, which is validated by the results obtained by the finite element model (i.e., the depth of lithiation predicted by numerical simulations is ~ 22.6%). Therefore, the relationship between fracture behavior and the lithiation kinetics is established, providing an effective strategy for estimating the utilization of active materials under crack-free operation. With the help of the theoretical mechanics model considering both volume change and concurrent movement of reaction front, the stress state in the lithiated silicon at the moment of crack initiation is given, showing the tensile hoop stress near the reaction front. Consequently, these results suggest that the fracture behaviors depend on the current density, but the position of crack initiation (i.e., the depth of lithiation with no crack) is unrelated to current density (at least in a relatively broad range) for large micron-sized crystalline silicon electrodes, thereby shedding light on the fracture mechanisms and the design of alloy anodes (e.g., size and structure) in lithium-ion batteries.
      通信作者: 张兴玉, xingyuzhang@nuaa.edu.cn
    • 基金项目: 国家自然科学基金(批准号: 11902149)、江苏省自然科学基金(批准号: BK20190380)和江苏高校优势学科建设工程资助的课题
      Corresponding author: Zhang Xing-Yu, xingyuzhang@nuaa.edu.cn
    • Funds: Project supported by the National Natural Science Foundation of China (Grant No. 11902149), the Natural Science Foundation of Jiangsu Province, China (Grant No. BK20190380), and the Priority Academic Program Development of Higher Education Institutions of Jiangsu Province, China.
    [1]

    Kim U H, Ryu H H, Kim J H, Mücke R, Kaghazchi P, Yoon C S, Sun Y K 2019 Adv. Energy Mater. 9 1803902Google Scholar

    [2]

    Uxa D, Jerliu B, Hüger E, Dörrer L, Horisberger M, Stahn J, Schmidt H 2019 J. Phys. Chem. C 123 22027Google Scholar

    [3]

    Ryu J, Bok T, Kim S, Park S 2018 ChemNanoMat 4 319Google Scholar

    [4]

    Mukanova A, Jetybayeva A, Myung S, Kim S, Bakenov Z 2018 Mater. Today Energy 9 49Google Scholar

    [5]

    Li P, Zhao G, Zheng X, Xu X, Yao C, Sun W, Dou S X 2018 Energy Storage Mater. 15 422Google Scholar

    [6]

    Franco Gonzalez A, Yang N, Liu R 2017 J. Phys. Chem. C 121 27775Google Scholar

    [7]

    Zhang S 2017 npj Comput. Mater. 3 7Google Scholar

    [8]

    Jin Y, Zhu B, Lu Z, Liu N, Zhu J 2017 Adv. Energy Mater. 7 1700715Google Scholar

    [9]

    He Y, Yu X, Li G, Wang R, Li H, Wang Y, Gao H, Huang X 2012 J. Power Sources 216 131Google Scholar

    [10]

    Zhang X, Song W, Liu Z, Chen H, Li T, Wei Y, Fang D 2017 J. Mater. Chem. A 5 12793Google Scholar

    [11]

    Shi F, Song Z, Ross P N, Somorjai G A, Ritchie R O, Komvopoulos K 2016 Nat. Commun. 7 11886Google Scholar

    [12]

    Lee S W, Lee H, Ryu I, Nix W D, Gao H, Cui Y 2015 Nat. Commun. 6 7533Google Scholar

    [13]

    Lee S W, McDowell M T, Berla L A, Nix W D, Cui Y 2012 Proc. Natl. Acad. Sci. U.S.A. 109 4080Google Scholar

    [14]

    Pharr M, Zhao K, Wang X, Suo Z, Vlassak J J 2012 Nano Lett. 12 5039Google Scholar

    [15]

    McDowell M T, Ryu I, Lee S W, Wang C, Nix W D, Cui Y 2012 Adv. Mater. 24 6034Google Scholar

    [16]

    Ryu I, Choi J W, Cui Y, Nix W D 2011 J. Mech. Phys. Solids 59 1717Google Scholar

    [17]

    Lee S W, McDowell M T, Choi J W, Cui Y 2011 Nano Lett. 11 3034Google Scholar

    [18]

    Goldman J L, Long B R, Gewirth A A, Nuzzo R G 2011 Adv. Funct. Mater. 21 2412Google Scholar

    [19]

    Jia Z, Li T 2015 J. Power Sources 275 866Google Scholar

    [20]

    Zhao K, Pharr M, Wan Q, Wang W L, Kaxiras E, Vlassak J J, Suo Z 2012 J. Electrochem. Soc. 159 A238Google Scholar

    [21]

    Cui Z, Gao F, Qu J 2012 J. Mech. Phys. Solids 60 1280Google Scholar

    [22]

    Di Leo C V, Rejovitzky E, Anand L 2015 Int. J. Solids Struct. 67-68 283Google Scholar

    [23]

    孙凤楠, 冯露, 卜家贺, 张静, 李林安, 王世斌 2019 物理学报 68 120201Google Scholar

    Sun F N, Feng L, Bu J H, Zhang J, Li L A, Wang S B 2019 Acta Phys. Sin. 68 120201Google Scholar

    [24]

    彭劼扬, 王家海, 沈斌, 张静, 李浩亮, 孙昊明 2019 物理学报 68 090202Google Scholar

    Peng J Y, Wang J H, Shen B, Zhang J, Li H L, Sun H M 2019 Acta Phys. Sin. 68 090202Google Scholar

    [25]

    An Y, Wood B C, Ye J, Chiang Y, Wang Y M, Tang M, Jiang H 2015 Phys. Chem. Chem. Phys. 17 17718Google Scholar

    [26]

    Ryu I, Lee S W, Gao H, Cui Y, Nix W D 2014 J. Power Sources 255 274Google Scholar

    [27]

    Ye J C, An Y H, Heo T W, Biener M M, Nikolic R J, Tang M, Jiang H, Wang Y M 2014 J. Power Sources 248 447Google Scholar

    [28]

    Yang H, Fan F, Liang W, Guo X, Zhu T, Zhang S 2014 J. Mech. Phys. Solids 70 349Google Scholar

    [29]

    Tian R, Park S, King P J, Cunningham G, Coelho J, Nicolosi V, Coleman J N 2019 Nat. Commun. 10 1933Google Scholar

    [30]

    Pharr M, Suo Z, Vlassak J J 2014 J. Power Sources 270 569Google Scholar

    [31]

    Soni S K, Sheldon B W, Xiao X, Bower A F, Verbrugge M W 2012 J. Electrochem. Soc. 159 A1520Google Scholar

    [32]

    Boles S T, Thompson C V, Kraft O, Mönig R 2013 Appl. Phys. Lett. 103 263906Google Scholar

    [33]

    Berla L A, Lee S W, Cui Y, Nix W D 2015 J. Power Sources 273 41Google Scholar

    [34]

    Jia Z, Liu W K 2016 Appl. Phys. Lett. 109 163903Google Scholar

  • 图 1  在锂化过程中(111)单晶硅电极的衰减机制

    Fig. 1.  Degradation mechanism of (111) single-crystalline silicon electrodes during lithiation.

    图 2  (a) 自制电池装置示意图; (b) 光学观测平台

    Fig. 2.  (a) Schematic diagram of a home-made battery cell; (b) experimental platform for the optical observation.

    图 3  硅柱典型形貌FE-SEM图, 标尺为10 μm

    Fig. 3.  Typical FE-SEM images of a micron-sized silicon pillar. Here, the scale bars are 10 μm.

    图 4  在以(a)−(d) 72.9 μA/cm2[10]、(e)−(h) 193.3 μA/cm2和(i)−(l) 465.3 μA/cm2的电流密度嵌锂过程中硅电极截面的形貌演化, 标尺为5 μm

    Fig. 4.  Morphological changes during lithiation for silicon electrodes at (a)−(d) 72.9 μA/cm2[10], (e)−(h) 193.3 μA/cm2 and (i)−(l) 465.3 μA/cm2. Here, the scale bars are 5 μm.

    图 5  不同电流密度下硅电极裂纹形成时对应的锂化时间和电压, 标尺为5 μm

    Fig. 5.  Profile of voltage and lithiation time for crack initiation of silicon electrodes at different current density. Here, the scale bars are 5 μm.

    图 6  (a) 不同电流密度下硅电极起裂时相对嵌锂深度; (b) 有限元模拟所得的应力云图; (c) 不同相边界移动速度下不同r/R (红色箭头标示)处径向应力分布

    Fig. 6.  (a) Relative lithiation depth for crack initiation of silicon electrodes at different current density; (b) hoop stress contour of Si micropillars obtained by finite element method; (c) hoop stress along the radial direction at different moving velocity of phase interfaces.

    图 7  硅基底锂化后形貌, 标尺为500 nm

    Fig. 7.  Morphology of the silicon substrate after lithiation. Here, the scale bar is 500 nm.

    图 8  (a) 锂化前硅柱圆截面示意图; (b) 锂化过程中硅柱圆界面示意图

    Fig. 8.  Cross-section of a silicon micropillar: (a) Before lithiation; (b) during lithiation.

    图 9  裂纹形成时硅电极在全锂化区域的受力示意图

    Fig. 9.  Schematic diagram of stress state at the moment of crack initiation.

  • [1]

    Kim U H, Ryu H H, Kim J H, Mücke R, Kaghazchi P, Yoon C S, Sun Y K 2019 Adv. Energy Mater. 9 1803902Google Scholar

    [2]

    Uxa D, Jerliu B, Hüger E, Dörrer L, Horisberger M, Stahn J, Schmidt H 2019 J. Phys. Chem. C 123 22027Google Scholar

    [3]

    Ryu J, Bok T, Kim S, Park S 2018 ChemNanoMat 4 319Google Scholar

    [4]

    Mukanova A, Jetybayeva A, Myung S, Kim S, Bakenov Z 2018 Mater. Today Energy 9 49Google Scholar

    [5]

    Li P, Zhao G, Zheng X, Xu X, Yao C, Sun W, Dou S X 2018 Energy Storage Mater. 15 422Google Scholar

    [6]

    Franco Gonzalez A, Yang N, Liu R 2017 J. Phys. Chem. C 121 27775Google Scholar

    [7]

    Zhang S 2017 npj Comput. Mater. 3 7Google Scholar

    [8]

    Jin Y, Zhu B, Lu Z, Liu N, Zhu J 2017 Adv. Energy Mater. 7 1700715Google Scholar

    [9]

    He Y, Yu X, Li G, Wang R, Li H, Wang Y, Gao H, Huang X 2012 J. Power Sources 216 131Google Scholar

    [10]

    Zhang X, Song W, Liu Z, Chen H, Li T, Wei Y, Fang D 2017 J. Mater. Chem. A 5 12793Google Scholar

    [11]

    Shi F, Song Z, Ross P N, Somorjai G A, Ritchie R O, Komvopoulos K 2016 Nat. Commun. 7 11886Google Scholar

    [12]

    Lee S W, Lee H, Ryu I, Nix W D, Gao H, Cui Y 2015 Nat. Commun. 6 7533Google Scholar

    [13]

    Lee S W, McDowell M T, Berla L A, Nix W D, Cui Y 2012 Proc. Natl. Acad. Sci. U.S.A. 109 4080Google Scholar

    [14]

    Pharr M, Zhao K, Wang X, Suo Z, Vlassak J J 2012 Nano Lett. 12 5039Google Scholar

    [15]

    McDowell M T, Ryu I, Lee S W, Wang C, Nix W D, Cui Y 2012 Adv. Mater. 24 6034Google Scholar

    [16]

    Ryu I, Choi J W, Cui Y, Nix W D 2011 J. Mech. Phys. Solids 59 1717Google Scholar

    [17]

    Lee S W, McDowell M T, Choi J W, Cui Y 2011 Nano Lett. 11 3034Google Scholar

    [18]

    Goldman J L, Long B R, Gewirth A A, Nuzzo R G 2011 Adv. Funct. Mater. 21 2412Google Scholar

    [19]

    Jia Z, Li T 2015 J. Power Sources 275 866Google Scholar

    [20]

    Zhao K, Pharr M, Wan Q, Wang W L, Kaxiras E, Vlassak J J, Suo Z 2012 J. Electrochem. Soc. 159 A238Google Scholar

    [21]

    Cui Z, Gao F, Qu J 2012 J. Mech. Phys. Solids 60 1280Google Scholar

    [22]

    Di Leo C V, Rejovitzky E, Anand L 2015 Int. J. Solids Struct. 67-68 283Google Scholar

    [23]

    孙凤楠, 冯露, 卜家贺, 张静, 李林安, 王世斌 2019 物理学报 68 120201Google Scholar

    Sun F N, Feng L, Bu J H, Zhang J, Li L A, Wang S B 2019 Acta Phys. Sin. 68 120201Google Scholar

    [24]

    彭劼扬, 王家海, 沈斌, 张静, 李浩亮, 孙昊明 2019 物理学报 68 090202Google Scholar

    Peng J Y, Wang J H, Shen B, Zhang J, Li H L, Sun H M 2019 Acta Phys. Sin. 68 090202Google Scholar

    [25]

    An Y, Wood B C, Ye J, Chiang Y, Wang Y M, Tang M, Jiang H 2015 Phys. Chem. Chem. Phys. 17 17718Google Scholar

    [26]

    Ryu I, Lee S W, Gao H, Cui Y, Nix W D 2014 J. Power Sources 255 274Google Scholar

    [27]

    Ye J C, An Y H, Heo T W, Biener M M, Nikolic R J, Tang M, Jiang H, Wang Y M 2014 J. Power Sources 248 447Google Scholar

    [28]

    Yang H, Fan F, Liang W, Guo X, Zhu T, Zhang S 2014 J. Mech. Phys. Solids 70 349Google Scholar

    [29]

    Tian R, Park S, King P J, Cunningham G, Coelho J, Nicolosi V, Coleman J N 2019 Nat. Commun. 10 1933Google Scholar

    [30]

    Pharr M, Suo Z, Vlassak J J 2014 J. Power Sources 270 569Google Scholar

    [31]

    Soni S K, Sheldon B W, Xiao X, Bower A F, Verbrugge M W 2012 J. Electrochem. Soc. 159 A1520Google Scholar

    [32]

    Boles S T, Thompson C V, Kraft O, Mönig R 2013 Appl. Phys. Lett. 103 263906Google Scholar

    [33]

    Berla L A, Lee S W, Cui Y, Nix W D 2015 J. Power Sources 273 41Google Scholar

    [34]

    Jia Z, Liu W K 2016 Appl. Phys. Lett. 109 163903Google Scholar

  • [1] 张凯, 徐鹏, 关学锋, 杜玉群, 王轲杰, 陆勇俊. 力学约束对锂离子电池双层电极中锂扩散和应力的影响. 物理学报, 2025, 74(2): . doi: 10.7498/aps.74.20241275
    [2] 李涛, 程夕明, 胡晨华. 锂离子电池电化学降阶模型性能对比. 物理学报, 2021, 70(13): 138801. doi: 10.7498/aps.70.20201894
    [3] 柳小伟, 宋辉, 郭美卿, 王根伟, 迟青卓. 基于电化学-应力耦合模型的锂离子电池硅/碳核壳结构的模拟与优化. 物理学报, 2021, 70(17): 178201. doi: 10.7498/aps.70.20210455
    [4] 彭劼扬, 王家海, 沈斌, 李浩亮, 孙昊明. 纳米颗粒的表面效应和电极颗粒间挤压作用对锂离子电池电压迟滞的影响. 物理学报, 2019, 68(9): 090202. doi: 10.7498/aps.68.20182302
    [5] 宋旭, 陆勇俊, 石明亮, 赵翔, 王峰会. 集流体塑性变形对锂离子电池双层电极中锂扩散和应力的影响. 物理学报, 2018, 67(14): 140201. doi: 10.7498/aps.67.20180148
    [6] 彭颖吒, 李泳, 郑百林, 张锴, 徐咏川. 考虑介质膨胀速率的锂离子电池管状电极中扩散诱导应力及轴向支反力分析. 物理学报, 2018, 67(7): 070203. doi: 10.7498/aps.67.20172288
    [7] 彭颖吒, 张锴, 郑百林, 李泳. 广义平面应变锂离子电池柱形梯度材料颗粒电极中扩散诱导应力分析. 物理学报, 2016, 65(10): 100201. doi: 10.7498/aps.65.100201
    [8] 王益军, 严诚. 不同电场下碳纳米管场致发射电流密度研究. 物理学报, 2015, 64(19): 197304. doi: 10.7498/aps.64.197304
    [9] 李娟, 汝强, 孙大伟, 张贝贝, 胡社军, 侯贤华. 锂离子电池SnSb/MCMB核壳结构负极材料嵌锂性能研究. 物理学报, 2013, 62(9): 098201. doi: 10.7498/aps.62.098201
    [10] 黄乐旭, 陈远富, 李萍剑, 黄然, 贺加瑞, 王泽高, 郝昕, 刘竞博, 张万里, 李言荣. 氧化石墨制备温度对石墨烯结构及其锂离子电池性能的影响. 物理学报, 2012, 61(15): 156103. doi: 10.7498/aps.61.156103
    [11] 白莹, 王蓓, 张伟风. 熔融盐法合成锂离子电池正极材料纳米LiNiO2. 物理学报, 2011, 60(6): 068202. doi: 10.7498/aps.60.068202
    [12] 刘相, 谢凯, 郑春满, 王军. 不同气氛下裂解含苯环聚硅氧烷制备锂离子电池Si-O-C复合负极材料的电池性能研究. 物理学报, 2011, 60(11): 118202. doi: 10.7498/aps.60.118202
    [13] 侯贤华, 胡社军, 石璐. 锂离子电池Sn-Ti合金负极材料的制备及性能研究. 物理学报, 2010, 59(3): 2109-2113. doi: 10.7498/aps.59.2109
    [14] 侯贤华, 余洪文, 胡社军. 锂离子电池Sn-Al薄膜电极的制备及电化学性能研究. 物理学报, 2010, 59(11): 8226-8230. doi: 10.7498/aps.59.8226
    [15] 陈立宝, 虞红春, 许春梅, 王太宏. 离子束辅助沉积硅薄膜负极材料的研究. 物理学报, 2009, 58(7): 5029-5034. doi: 10.7498/aps.58.5029
    [16] 李佳, 杨传铮, 张熙贵, 张建, 夏保佳. 石墨/Li(Ni1/3Co1/3Mn1/3)O2电池充放电过程中电极材料的XRD研究. 物理学报, 2009, 58(9): 6573-6581. doi: 10.7498/aps.58.6573
    [17] 王新庆, 李 良, 褚宁杰, 金红晓, 葛洪良. 纳米碳管阵列场发射电流密度的理论数值优化. 物理学报, 2008, 57(11): 7173-7177. doi: 10.7498/aps.57.7173
    [18] 刘龙平, 赵振杰, 黄灿星, 吴志明, 杨燮龙. 复合结构丝中的电流密度分布和巨磁阻抗效应. 物理学报, 2006, 55(4): 2014-2020. doi: 10.7498/aps.55.2014
    [19] 吴汉华, 汪剑波, 龙北玉, 吕宪义, 龙北红, 金曾孙, 白亦真, 毕冬梅. 电流密度对铝合金微弧氧化膜物理化学特性的影响. 物理学报, 2005, 54(12): 5743-5749. doi: 10.7498/aps.54.5743
    [20] 孙俊生, 武传松. 熔池表面形状对电弧电流密度分布的影响. 物理学报, 2000, 49(12): 2427-2432. doi: 10.7498/aps.49.2427
计量
  • 文章访问数:  6467
  • PDF下载量:  94
  • 被引次数: 0
出版历程
  • 收稿日期:  2020-06-15
  • 修回日期:  2020-07-28
  • 上网日期:  2020-12-04
  • 刊出日期:  2020-12-20

/

返回文章
返回