搜索

x
中国物理学会期刊

强热涨落下体心立方晶体中心对称参数失效机制及改进

Failure mechanism of the central symmetry parameter in bodycentered cubic crystals under strong thermal fluctuations and its improvement

PDF
导出引用
  • 在原子尺度揭示热-力耦合下晶体缺陷的动力学演化机制,是理解材料宏微观行为的关键,而可靠的局域原子构型表征是其物理基础。中心对称参数(CSP)是定量描述晶格反演对称性破缺的经典参量,广泛用于原子尺度结构分析。然而,在强热涨落条件下,体心立方结构材料因近邻壳层紧凑,易而产生近邻原子空间交叠,现有CSP方法易引发系统性近邻误配,难以区分热致声子振动与真实结构畸变,使CSP标量场呈现非物理的多层离散分布。本文提出理想近邻逼近法,以理想体心立方晶格为物理先验模板,通过最小空间距离映射重构真实的近邻配对关系,在结构分析底层实现热背景与不可逆畸变的有效剥离。对α-Fe单晶、双晶及裂纹扩展体系的分子动力学模拟表明,该方法在宽温区内均保持符合连续介质物理特征的连续单峰分布,消除了热致假象,实现了在强热-力耦合场下晶界及裂纹尖端缺陷的高信噪比识别,为高温原子尺度结构表征提供了物理一致的方法。

     

    Reliable identification of crystal defects in molecular dynamics simulations is essential for understanding deformation and fracture at elevated temperatures. The centrosymmetry parameter (CSP) is widely used for this purpose, but its reliability can deteriorate in bodycentered cubic (BCC) crystals under strong thermal fluctuations. The distance between the second- and first-neighbor shells in an ideal BCC lattice differs by only about 15.5%. Thermal fluctuations can reverse the instantaneous distance ordering of atoms in these shells, causing a second neighbor to be selected in place of a first neighbor. Minimum-weight matching (MWM) improves the pairing of selected neighbors but does not prevent this selection error. Here, we examine this failure mechanism and propose an ideal-neighbor approximation (INA) for CSP calculation. For each central atom, candidates within a cutoff sphere are assigned to the eight inversion-symmetric sites of an oriented ideal BCC template according to their geometric deviations. The candidate closest to each site is retained, and opposite template sites define the pairs used to calculate CSP. Radial distribution functions for α-Fe show overlap between the first two neighbor shells at elevated temperatures. Molecular dynamics simulations further reveal spurious, discrete high-CSP bands in thermally fluctuating BCC crystals. In defect-free α-Fe between 100 and 1200 K, INA-CSP instead produces a compact, unimodal distribution. From 300 to 1200 K, its standard deviation increases gradually with temperature, whereas that of MWM-CSP rises sharply. In an α-Fe bicrystal at 600 K, INA-CSP maintains a low-CSP background in the grain interiors while distinguishing the grain boundary and free surfaces. In a pre-cracked α-Fe crystal subjected to Mode I tension at 900 K, it reduces high-CSP artifacts in the far-field crystal and improves the visibility of the crack-tip region and newly formed surfaces. These results show that template-guided neighbor selection reduces thermally induced misidentification in the BCC systems examined. In amorphous or severely distorted regions, INA-CSP should be combined with independent structural analysis because the BCC template may no longer be valid. Within regions that retain recognizable BCC order, INA-CSP provides a more reliable tool for studying defect evolution during high-temperature deformation and fracture.

     

    目录

    /

    返回文章
    返回