搜索

x
中国物理学会期刊

白光LED用LiBaBO3:Eu2+材料发光特性研究

CSTR: 32037.14.aps.58.1257

Luminescence characteristics of LiBaBO3:Eu2+ phosphor for white LED

CSTR: 32037.14.aps.58.1257
PDF
导出引用
  • 采用高温固相法制备了LiBaBO3:Eu2+绿色发光材料.测量了Eu2+浓度为1mol%时样品的激发与发射光谱,其发射光谱为双峰宽谱,主峰分别为482和507nm,与理论计算值符合很好;监测482nm发射峰时,对应激发光谱的峰值为287和365nm,监测507nm发射峰时,对应的激发峰为365和405nm.研究了Eu2+浓度对材料发射光谱的影响,结果显示,随Eu2+浓度的增大,蓝、绿发射峰均发生了

     

    The LiBaBO3:Eu2+ green phosphor was synthesized by high temperature solid-state method. With the Eu2+ doping of 1mol%, the emission and excitation spectra of LiBaBO3:Eu2+ phosphor were measured. The emission spectrum shows two peaks at 482 and 507nm, which are in good agreement with the theoretical values. The excitation spectrum for 482nm emission has two excitation peaks at 287 and 365nm, and for 507nm excitation emission at 365 and 405nm. The effect of Eu2+ concentration on the emission spectrum of LiBaBO3:Eu2+ phosphor was investigated. The results show that red shift takes place in the blue and green emission spectra with increasing Eu2+ concentration, and the blue emission disappears at 3 mol% Eu2+. However, the green emission always exists. The dependence of luminescent intensity of LiBaBO3:Eu2+ phosphor on the Eu2+ concentration was studied, and the results show that the luminescent intensity firstly increases with the increasing Eu2+ concentration, then decreases, and reaches the maximal value at 3 mol% Eu2+. According to the Dexter theory, the concentration quenching mechanism is the d-d interaction.

     

    目录

    /

    返回文章
    返回