搜索

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

微重力条件下Cu-Zr共晶合金的液固相变研究

陈克萍 吕鹏 王海鹏

引用本文:
Citation:

微重力条件下Cu-Zr共晶合金的液固相变研究

陈克萍, 吕鹏, 王海鹏

Liquid-solid phase transition of Cu-Zr eutectic alloy under microgravity condition

Chen Ke-Ping, Lü Peng, Peng Wang
PDF
导出引用
  • 采用落管方法实现了液态Cu-10 wt.% Zr亚共晶、Cu-12.27 wt.% Zr共晶和Cu-15 wt.% Zr过共晶合金在微重力无容器条件下的快速共晶与枝晶生长.Cu-12.27 wt.% Zr共晶合金的凝固组织随液滴直径减小由层片规则共晶向不规则共晶转变,且层片间距减小;Cu-10 wt.% Zr亚共晶合金的初生(Cu)相随液滴直径减小由粗大树枝晶向棒状晶转变,且所占体积分数增加,部分区域形成花状凝固组织,(Cu)相枝晶辐射向外生长;Cu-15 wt.% Zr过共晶合金初生相则为金属间化合物Cu9Zr2相,呈条状生长,随液滴直径减小冷却速率增大,凝固组织由宏观弯曲生长向球状晶胞转变.理论计算表明,三个合金液固相变枝晶与共晶的生长均由溶质扩散控制.测定Cu-10 wt.% Zr亚共晶合金初生(Cu)相显微硬度随液滴直径减小而增大,三个合金的共晶相随合金初始成分增大而增大.
    Eutectic phase transition involves the competitive nucleation and coupled growth of two solid phases within one liquid phase. Phase selection especially under unequilibrium condition, may result in novel microstructures and thus affects the performances of eutectic alloys. Liquid Cu-10 wt.% Zr hypoeutectic, Cu-12.27 wt.% Zr eutectic and Cu-15 wt.% Zr hypereutectic alloys are rapidly solidified in the containerless process in a 3 m drop tube. During the experiments, the Cu-Zr alloys are heated by induction heating in an ultrahigh vacuum chamber and further overheated to 200 K above their liquidus temperatures for a few seconds. Then the liquid alloys are ejected out from the small orifice and dispersed into tiny droplets after adding the argon gas flow. The solidified samples are analyzed by Phenom Pro scanning electron microscope and HXD-2000 TMC/LCD microhardness instrument. The competitive nucleation and growth among (Cu) dendrite, Cu9Zr2 dendrite and (Cu+Cu9Zr2) eutectic phase become more and more intensive as droplet diameter decreases. The layer spacing in Cu-12.27 wt.% Zr eutectic alloy decreases when the undercooling increases. And the microstructural transition takes place from lamellar eutectic to anomalous eutectic. The microstructure of Cu-10 wt.% Zr hypoeutectic alloy is characterized by (Cu) dendrite and lamellar eutectic. Whereas the microstructure in Cu-15 wt.% Zr hypereutectic alloy consists of Cu9Zr2 dendrite and lamellar eutectic. For the Cu-10 wt.% Zr hypoeutectic alloy, with the decrease of droplet size, the primary (Cu) phase transforms from coarse dendrites into equiaxed grains, and the volume fraction of (Cu) dendrite becomes larger and larger. As for Cu-15 wt.% Zr hypereutectic alloy, the primary Cu9Zr2 intermetallic compound grows in a band manner, and with the decrease of droplet size and increase of cooling rate, the solidified microstructure transforms from band Cu9Zr2 dendrite plus lamellar eutectic into spherical cell structure. The three alloys reach maximal undercooling at 177 K, 156 K and 204 K, respectively. The Trivedi-Magnin-Kurz and Lipton-Kurz-Trivedi/Boetinger-Coriell-Trivedi models are used to analyze the dendritic and eutectic growth as a function of undercooling. Theoretical analysis indicates that both dendritic growth and eutectic growth are controlled by solute diffusion during liquid-solid phase transition. To further investigate the effects of cooling rate and undercooling on the mechanical properties of Cu-Zr eutectic alloys, the microhardness of each of different phases is determined. The microhardness of the primary (Cu) phase within Cu-10 wt.% Zr hypoeutectic alloy is strengthened with the increase of cooling rate. The microhardness of eutectic within the three alloys also increases with increasing the cooling rate and the initial alloy composition of the alloy.
      通信作者: 王海鹏, hpwang@nwpu.edu.cn
    • 基金项目: 国家自然科学基金(批准号:51474175,51522102)和陕西省工业科技攻关项目(批准号:2015GY138)资助的课题.
      Corresponding author: Peng Wang, hpwang@nwpu.edu.cn
    • Funds: Project supported by the National Natural Science Foundation of China (Grant Nos. 51474175, 51522102) and the Science and Technology Program of Shaanxi Province, China (Grant No. 2015GY138).
    [1]

    Cao L G, Cochrane R F, Mullis A M 2014 J. Alloys Compd. 615 S599

    [2]

    Clopet C R, Cochrane R F, Mullis A M 2013 Appl. Phys. Lett. 102 031906

    [3]

    Cui C J, Zhang J, Xue T, Liu L, Fu H Z 2015 J. Mater. Sci. Technol. 31 280

    [4]

    Hu L, Li L H, Yang S J, Wei B B 2015 Chem. Phys. Lett. 621 91

    [5]

    Wu M W, Xiong S M 2011 Acta Phys. Sin. 60 058103 (in Chinese) [吴孟武, 熊守美 2011 物理学报 60 058103]

    [6]

    Yan N, Wang W L, Dai F P, Wei B B 2011 Acta Phys. Sin. 60 034602 (in Chinese) [闫娜, 王伟丽, 代富平, 魏炳波 2011 物理学报 60 034602]

    [7]

    Zhang N N, Luo X H, Feng S B, Ren Y H 2014 J. Mater. Sci. Technol. 30 499

    [8]

    Zhao C C, Zuo X W, Wang E G, Niu R M, Han K 2016 Mater. Sci. Eng. A 652 296

    [9]

    Zuo X W, Guo R, Zhao C C, Zhang L, Wang E G, Han K 2016 J. Alloys Compd. 676 46

    [10]

    Erol M, Byk U 2016 Trans. Indian. Inst. Met. 69 961

    [11]

    Ge L L, Liu R P, Li G, Ma M Z, Wang W K 2004 Mater. Sci. Eng. A 385 128

    [12]

    Yang S J, Wang W L, Wei B B 2015 Acta Phys. Sin. 64 056401 (in Chinese) [杨尚京, 王伟丽, 魏炳波 2015 物理学报 64 056401]

    [13]

    L P, Wang H P 2016 Sci. Rep. 6 22641

    [14]

    Trivedi R, Magnin P, Kurz W 1987 Acta Metall. 35 971

    [15]

    Lipton J, Kurz W, Trivedi R 1987 Acta Metall. 35 957

    [16]

    Boetinger W J, Coriell S R, Trivedi R 1987 Proceedings of the Fourth Conference on Rapid Solidification Processing, Principles and Technologies Baton Rouge, USA, 1987 p13

    [17]

    Zhou S H, Napolitano R E 2010 Acta Mater. 58 2186

    [18]

    Wang Q, Wang L M, Ma M Z, Binder S, Volkmann T, Herlach D M, Wang J S, Xue Q G, Tian Y J, Liu R P 2011 Phys. Rev. B 83 014202

    [19]

    Gegner J, Shuleshova O, Kobold R, Holland-Moritz D, Yang F, Hornfeck W, Bednarcik J, Herlach D M 2013 J. Alloys Compd. 576 232

    [20]

    Gierlotka W, Zhang K C, Chang Y P 2011 J. Alloys Compd. 509 8313

    [21]

    Han X J, Schober H R 2011 Phys. Rev. B 83 224201

    [22]

    Wang N, Li C R, Du Z M, Wang F M, Zhang W J 2006 Calphad 30 461

    [23]

    Yang F, Holland-Moritz D, Gegner J, Heintzmann P, Kargl F, Yuan C C, Simeoni G G, Meyer A 2014 Europhys. Lett. 107 46001

    [24]

    Okamoto H 2008 J. Phase Equilibria. 29 204

    [25]

    Levi C G, Mehrabian R 1982 Matall. Trans. A 13 221

    [26]

    Lee E S, Ahn S 1994 Acta Metall. Mater. 42 3231

    [27]

    Aziz M J 1982 J. Appl. Phys. 53 1158

    [28]

    Gale W F, Totememier T C 2004 Smithells Metals Reference Book (8th Ed.) (Amsterdam: Elsevier Publishers Ltd) p8-1

    [29]

    Guo H S, Guo X P 2011 Trans. Nonfermus Met. Soc. China 21 1283

    [30]

    Erol M, Byk U, Volkmann T, Herlach D M 2013 J. Alloys Compd. 575 96

  • [1]

    Cao L G, Cochrane R F, Mullis A M 2014 J. Alloys Compd. 615 S599

    [2]

    Clopet C R, Cochrane R F, Mullis A M 2013 Appl. Phys. Lett. 102 031906

    [3]

    Cui C J, Zhang J, Xue T, Liu L, Fu H Z 2015 J. Mater. Sci. Technol. 31 280

    [4]

    Hu L, Li L H, Yang S J, Wei B B 2015 Chem. Phys. Lett. 621 91

    [5]

    Wu M W, Xiong S M 2011 Acta Phys. Sin. 60 058103 (in Chinese) [吴孟武, 熊守美 2011 物理学报 60 058103]

    [6]

    Yan N, Wang W L, Dai F P, Wei B B 2011 Acta Phys. Sin. 60 034602 (in Chinese) [闫娜, 王伟丽, 代富平, 魏炳波 2011 物理学报 60 034602]

    [7]

    Zhang N N, Luo X H, Feng S B, Ren Y H 2014 J. Mater. Sci. Technol. 30 499

    [8]

    Zhao C C, Zuo X W, Wang E G, Niu R M, Han K 2016 Mater. Sci. Eng. A 652 296

    [9]

    Zuo X W, Guo R, Zhao C C, Zhang L, Wang E G, Han K 2016 J. Alloys Compd. 676 46

    [10]

    Erol M, Byk U 2016 Trans. Indian. Inst. Met. 69 961

    [11]

    Ge L L, Liu R P, Li G, Ma M Z, Wang W K 2004 Mater. Sci. Eng. A 385 128

    [12]

    Yang S J, Wang W L, Wei B B 2015 Acta Phys. Sin. 64 056401 (in Chinese) [杨尚京, 王伟丽, 魏炳波 2015 物理学报 64 056401]

    [13]

    L P, Wang H P 2016 Sci. Rep. 6 22641

    [14]

    Trivedi R, Magnin P, Kurz W 1987 Acta Metall. 35 971

    [15]

    Lipton J, Kurz W, Trivedi R 1987 Acta Metall. 35 957

    [16]

    Boetinger W J, Coriell S R, Trivedi R 1987 Proceedings of the Fourth Conference on Rapid Solidification Processing, Principles and Technologies Baton Rouge, USA, 1987 p13

    [17]

    Zhou S H, Napolitano R E 2010 Acta Mater. 58 2186

    [18]

    Wang Q, Wang L M, Ma M Z, Binder S, Volkmann T, Herlach D M, Wang J S, Xue Q G, Tian Y J, Liu R P 2011 Phys. Rev. B 83 014202

    [19]

    Gegner J, Shuleshova O, Kobold R, Holland-Moritz D, Yang F, Hornfeck W, Bednarcik J, Herlach D M 2013 J. Alloys Compd. 576 232

    [20]

    Gierlotka W, Zhang K C, Chang Y P 2011 J. Alloys Compd. 509 8313

    [21]

    Han X J, Schober H R 2011 Phys. Rev. B 83 224201

    [22]

    Wang N, Li C R, Du Z M, Wang F M, Zhang W J 2006 Calphad 30 461

    [23]

    Yang F, Holland-Moritz D, Gegner J, Heintzmann P, Kargl F, Yuan C C, Simeoni G G, Meyer A 2014 Europhys. Lett. 107 46001

    [24]

    Okamoto H 2008 J. Phase Equilibria. 29 204

    [25]

    Levi C G, Mehrabian R 1982 Matall. Trans. A 13 221

    [26]

    Lee E S, Ahn S 1994 Acta Metall. Mater. 42 3231

    [27]

    Aziz M J 1982 J. Appl. Phys. 53 1158

    [28]

    Gale W F, Totememier T C 2004 Smithells Metals Reference Book (8th Ed.) (Amsterdam: Elsevier Publishers Ltd) p8-1

    [29]

    Guo H S, Guo X P 2011 Trans. Nonfermus Met. Soc. China 21 1283

    [30]

    Erol M, Byk U, Volkmann T, Herlach D M 2013 J. Alloys Compd. 575 96

  • [1] 徐山森, 常健, 翟斌, 朱先念, 魏炳波. 液态五元Zr57Cu20Al10Ni8Ti5合金的微观结构演变与非晶形成机制. 物理学报, 2023, 72(22): 226401. doi: 10.7498/aps.72.20231169
    [2] 武博文, 胡亮, 耿德路, 魏炳波. 液态Zr35Al23Ni22Gd20合金的亚稳相分离与双相非晶形成机理. 物理学报, 2023, 72(21): 216401. doi: 10.7498/aps.72.20231002
    [3] 徐山森, 常健, 吴宇昊, 沙莎, 魏炳波. 液态五元Ni-Zr-Ti-Al-Cu合金快速凝固过程的高速摄影研究. 物理学报, 2019, 68(19): 196401. doi: 10.7498/aps.68.20190910
    [4] 沙莎, 王伟丽, 吴宇昊, 魏炳波. 深过冷条件下Co7Mo6金属间化合物的枝晶生长和维氏硬度研究. 物理学报, 2018, 67(4): 046402. doi: 10.7498/aps.67.20172156
    [5] 朱海哲, 阮莹, 谷倩倩, 闫娜, 代富平. 落管中Ni-Fe-Ti合金的快速凝固机理及其磁学性能. 物理学报, 2017, 66(13): 138101. doi: 10.7498/aps.66.138101
    [6] 谷倩倩, 阮莹, 代富平. 微重力下Fe-Al-Nb合金液滴的快速凝固机理及其对显微硬度的影响. 物理学报, 2017, 66(10): 106401. doi: 10.7498/aps.66.106401
    [7] 夏瑱超, 王伟丽, 罗盛宝, 魏炳波. 三元等原子比Fe33.3Cu33.3Sn33.3合金的快速凝固机理与室温组织磁性研究. 物理学报, 2016, 65(15): 158101. doi: 10.7498/aps.65.158101
    [8] 魏绍楼, 黄陆军, 常健, 杨尚京, 耿林. 液态Ti-Al合金的深过冷与快速枝晶生长. 物理学报, 2016, 65(9): 096101. doi: 10.7498/aps.65.096101
    [9] 杨尚京, 王伟丽, 魏炳波. 深过冷液态Al-Ni合金中枝晶与共晶生长机理. 物理学报, 2015, 64(5): 056401. doi: 10.7498/aps.64.056401
    [10] 孟广慧, 林鑫. 二元层片共晶凝固过程的特征尺度选择. 物理学报, 2014, 63(6): 068104. doi: 10.7498/aps.63.068104
    [11] 王小娟, 阮莹, 洪振宇. Al-Cu-Ge合金的热物理性质与快速凝固规律研究. 物理学报, 2014, 63(9): 098101. doi: 10.7498/aps.63.098101
    [12] 闫娜, 王伟丽, 代富平, 魏炳波. 三元Co-Cu-Pb偏晶合金的快速凝固组织形成规律研究. 物理学报, 2011, 60(3): 036402. doi: 10.7498/aps.60.036402
    [13] 徐锦锋, 范于芳, 陈娓, 翟秋亚. 快速凝固Cu-Pb过偏晶合金的性能表征. 物理学报, 2009, 58(1): 644-649. doi: 10.7498/aps.58.644
    [14] 殷涵玉, 鲁晓宇. 深过冷Cu60Sn30Pb10偏晶合金的快速凝固. 物理学报, 2008, 57(7): 4341-4346. doi: 10.7498/aps.57.4341
    [15] 翟秋亚, 杨 扬, 徐锦锋, 郭学锋. 快速凝固Cu-Sn亚包晶合金的电阻率及力学性能. 物理学报, 2007, 56(10): 6118-6123. doi: 10.7498/aps.56.6118
    [16] 梅策香, 阮 莹, 代富平, 魏炳波. 深过冷Ag-Cu-Ge三元共晶合金的相组成与凝固特征. 物理学报, 2007, 56(2): 988-993. doi: 10.7498/aps.56.988
    [17] 臧渡洋, 王海鹏, 魏炳波. 深过冷三元Ni-Cu-Co合金的快速枝晶生长. 物理学报, 2007, 56(8): 4804-4809. doi: 10.7498/aps.56.4804
    [18] 刘向荣, 王 楠, 魏炳波. 无容器条件下Cu-Pb偏晶的快速生长. 物理学报, 2005, 54(4): 1671-1678. doi: 10.7498/aps.54.1671
    [19] 徐锦锋, 魏炳波. 快速凝固Co-Cu包晶合金的电学性能. 物理学报, 2005, 54(7): 3444-3450. doi: 10.7498/aps.54.3444
    [20] 姚文静, 杨 春, 韩秀君, 陈 民, 魏炳波, 过增元. 微重力条件下Ni-Cu合金的快速枝晶生长研究. 物理学报, 2003, 52(2): 448-453. doi: 10.7498/aps.52.448
计量
  • 文章访问数:  6220
  • PDF下载量:  201
  • 被引次数: 0
出版历程
  • 收稿日期:  2016-10-31
  • 修回日期:  2016-11-28
  • 刊出日期:  2017-03-05

/

返回文章
返回