Search

Article

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

Creep behavior of a Fe-based bulk amorphous alloy using nanoindentation

Peng Jian Long Zhi-Lin Wei Hong-Qing Li Xiang-An Zhang Zhi-Chun

Creep behavior of a Fe-based bulk amorphous alloy using nanoindentation

Peng Jian, Long Zhi-Lin, Wei Hong-Qing, Li Xiang-An, Zhang Zhi-Chun
PDF
Get Citation
Metrics
  • Abstract views:  3464
  • PDF Downloads:  1093
  • Cited By: 0
Publishing process
  • Received Date:  29 July 2008
  • Accepted Date:  24 November 2008
  • Published Online:  20 June 2009

Creep behavior of a Fe-based bulk amorphous alloy using nanoindentation

  • 1. 湘潭大学土木工程与力学学院,湘潭 411105

Abstract: The creep behavior of a {[(Fe0.6Co0.4)0.75B0.2Si0.05]0.96Nb0.04}96Cr4 bulk amorphous alloy and effects of different loading rates on its creep deformation behavior were investigated using nanoindentation technique at room temperature. It is found that the creep deformation of this alloy is strongly dependent on the indentation loading rate: when the loading rate ranges from 3 to 24 mN/s, distinct creep deformation occurs; but when the loading rate decreases to 1 mN/s or 0.75 mN/s, the creep deformation is completely suppressed. The creep deformation behavior of the {[(Fe0.6Co0.4)0.75B0.2Si0.05]0.96Nb0.04}96Cr4 bulk amorphous alloy was modeled using the elastic-viscoelastic-viscous (EVEV) model and a high correlation coefficient (R) of 0.9392 was obtained, implying that this creep behavior studied can be well described by the EVEV model. Based on the EVEV model, the creep compliance and retardation spectrum, which are related to the interior structure of the bulk amorphous alloy, were further calculated by the EVEV model. Finally, the creep mechanism at room temperature was discussed in detail according to the analysis of the creep rate sensitivity index (m) as well as the observation on the morphology of indents using the atomic force microscope (AFM).

Catalog

    /

    返回文章
    返回