Search

Article

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

Finite element analysis and experimental studies on fracture splitting processing by Nd: YAG laser ablation

Yu Ge Yang Shen-Hua Wang Meng Kou Shu-Qing Lin Bao-Jun Lu Wan-Chun

Citation:

Finite element analysis and experimental studies on fracture splitting processing by Nd: YAG laser ablation

Yu Ge, Yang Shen-Hua, Wang Meng, Kou Shu-Qing, Lin Bao-Jun, Lu Wan-Chun
PDF
Get Citation

(PLEASE TRANSLATE TO ENGLISH

BY GOOGLE TRANSLATE IF NEEDED.)

  • Laser fracture splitting technology significantly improves the processing quality and efficiency of engine crankcase main bearing block. In order to research the splitting mechanism of ductile iron material fracture notch cauterized by Nd: YAG Laser, the FEAmodel of fracture splitting processing of engine crankcase main bearing block has been developed successfully. The splitting parameters of ductile iron material (QT500-7) main bearing block is analyzed. The numerical simulation results indicate that: among all the key parameters affecting the quality of fracture splitting, the effect of notch depth on fracture splitting load is more obvious than that of the notch opening angle and radius. The value of splitting load decreases rapidly with the increasing notch depth, while the splitting load increases with the increasing notch angle and radius. The optimum value of the notch depth, angle, and radius should be respectively at 0.5 mm, 60 o, and 0.2 mm. The results have been proved by experiments. The optimum parameters obtained from the ABAQUS simulation and experiments provide a numerical reference for significantly reducing the splitting load and optimizing the fracture splitting process, help to achieve the rapid development of engine block process and promote the green manufacture of automobile industry.
    • Funds: Project supported by the National Natural Science Foundation of China (Grant No.50375066), and the Key Science and Technology Foundation of Jilin Provincial (Grant No. 20075003).
    [1]

    Gault B, Chen Y M, Moody M P, Ohkubo T, Hono K, Ringer S P 2011 J. Appl. Phys. 10 094901

    [2]

    Sawyer C A, Guzman J, Boswell-Koller C N, Sherburne M P, Mastandrea J P, Bustillo K C, Ager J W, Haller E E, Chrzan D C, 2011 J. Appl. Phys. 10 094307

    [3]

    Lin Y F, Zh G, Zhu H Y, Huang C H, Li A H, Wei Y 2009 Acta Phys. Sin. 58 3909 (in Chinese) [林燕风, 张戈, 朱海勇, 黄呈辉, 李爱红, 魏永 2009 物理学报 58 3909]

    [4]

    Yu B H, Dai N L, Wang Y, Li Y H, Ji L L, Zheng Q G, Lu P X 2007 Acta Phys. Sin. 56 5821 (in Chinese) [余本海, 戴能利, 王英, 李玉华, 季玲玲, 郑启光, 陆培祥 2007 物理学报 56 5821]

    [5]

    Shao D, Hu B, Zheng Q G 2009 Laser and Advanced Manufacturing Technology and Equipment Integration (Beijing: Science Press) p56 (in Chinese) [邵丹, 胡兵, 郑启光 2009 激光先进制造技术与设备集成 (北京: 科学出版社) 第56页]

    [6]

    Zheng Q F 2010 Ph. D. Dissertation (Changchun: Jilin University) (in Chinese) [郑祺峰 2010 博士学位论文 (长春: 吉林大学)]

    [7]

    Akihiro MATSUGASAKO 2011 KOBELCO Technol Rev. 30 57

    [8]

    Zhao Y, Yang S H, Zheng Q F, Jin W M 2011 J. JLU (Engineering and Technology Edition) 41 984 (in Chinese) [赵勇, 杨慎华, 郑祺峰, 金文明 2011 吉林大学学报(工学版) 41 984]

    [9]

    Liu Z F, Yang Z G, He S K, Jiang S H 2011 Modern Components 3 48 (in Chinese) [刘赞丰, 杨志刚, 何善开, 江水浩 2011 现代零部件 3 48]

    [10]

    Yang S H, Kou S Q, Gu Z W, Jin W M, Zhao Y 2000 J. Hit 32 129 (in Chinese) [杨慎华, 寇淑清, 谷诤巍, 金文明, 赵勇 2000 哈尔滨工业大学学报 32 129]

    [11]

    Kou S Q, Yang S H, Zhao Q H, Zhang Z Q 2007 J. Hit 39 1147 (in Chinese) [寇淑清, 杨慎华, 赵庆华, 张志强 2007 哈尔滨工业大学学报 39 1147]

    [12]

    Zheng L M, Kou S Q, Yang S H, Li L L, Li F 2010 Opt. Laser Technol. 42 985

    [13]

    Amit S, Vinod Y 2012 Opt. Laser Technol. 44 159

    [14]

    Lu J, Ni X W, He A Z 1996 Laser and Material Interaction Physics (Beijing: Mechanical Industry Press) pp35--37 (in Chinese) [陆建, 倪晓武, 贺安之 1996 激光与材料相互作用物理学 (北京: 机械工业出版社)第35---37页]

    [15]

    Fan T Y 1978 Fracture Mechanics (Nanjing: Jiangsu Science and Technology Press) p333 (in Chinese) [范天佑 1978 断裂力学基础 (南京: 江苏科学技术出版社) 第333页]

    [16]

    A F M Arif, Bekir Samir Yilbas Thermal 2008 Int J Adv Manuf Technol. 37 698

    [17]

    Zhang D, Harris S J, McCartney D G, Pashby I R, Powell J, Shipway P H, Voisey K T 2008 Mat. Sci. Eng. A 489 273

    [18]

    Xie D, Qian Q, Li C A 2009 Numerical Methods and Engineering Applications of Fracture Mechanics (Beijing: Science Press) p145 (in Chinese) [解德, 钱勤, 李长安 2009 断裂力学中的数值计算方法与工程应用 (北京: 科学出版社) 第145页]

    [19]

    Filippo Berto 2012 Int. J. Fatigue. 38 188

    [20]

    He D Y 2009 Ph. D. Dissertation (Changchun: Jilin University) (in Chinese) [何东野 2011 博士学位论文 (长春: 吉林大学)]

    [21]

    Zhang X Z, Cai, Q Z, Chen, Q F, Zhou, G F, Xiong Y Z 2011 Research on Iron and Steel 39 15 (in Chinese) [张贤忠, 蔡启舟, 陈庆丰, 周桂峰, 熊玉彰 2011 钢铁研究 39 15]

    [22]

    Zhang X Z, Cai, Q Z, Chen, Q F, Zhou G F, Xiong Y Z 2011 J. Mater Sci. 46 1789

    [23]

    Boo K S, Cho H S 1990 Proc. Instn. Mech. Engrs. 204 175

    [24]

    Wang J W 2011 Ph. D. Dissertation (Changchun: Jilin University) (in Chinese) [王金伟 2011 博士学位论文 (长春: 吉林大学)]

  • [1]

    Gault B, Chen Y M, Moody M P, Ohkubo T, Hono K, Ringer S P 2011 J. Appl. Phys. 10 094901

    [2]

    Sawyer C A, Guzman J, Boswell-Koller C N, Sherburne M P, Mastandrea J P, Bustillo K C, Ager J W, Haller E E, Chrzan D C, 2011 J. Appl. Phys. 10 094307

    [3]

    Lin Y F, Zh G, Zhu H Y, Huang C H, Li A H, Wei Y 2009 Acta Phys. Sin. 58 3909 (in Chinese) [林燕风, 张戈, 朱海勇, 黄呈辉, 李爱红, 魏永 2009 物理学报 58 3909]

    [4]

    Yu B H, Dai N L, Wang Y, Li Y H, Ji L L, Zheng Q G, Lu P X 2007 Acta Phys. Sin. 56 5821 (in Chinese) [余本海, 戴能利, 王英, 李玉华, 季玲玲, 郑启光, 陆培祥 2007 物理学报 56 5821]

    [5]

    Shao D, Hu B, Zheng Q G 2009 Laser and Advanced Manufacturing Technology and Equipment Integration (Beijing: Science Press) p56 (in Chinese) [邵丹, 胡兵, 郑启光 2009 激光先进制造技术与设备集成 (北京: 科学出版社) 第56页]

    [6]

    Zheng Q F 2010 Ph. D. Dissertation (Changchun: Jilin University) (in Chinese) [郑祺峰 2010 博士学位论文 (长春: 吉林大学)]

    [7]

    Akihiro MATSUGASAKO 2011 KOBELCO Technol Rev. 30 57

    [8]

    Zhao Y, Yang S H, Zheng Q F, Jin W M 2011 J. JLU (Engineering and Technology Edition) 41 984 (in Chinese) [赵勇, 杨慎华, 郑祺峰, 金文明 2011 吉林大学学报(工学版) 41 984]

    [9]

    Liu Z F, Yang Z G, He S K, Jiang S H 2011 Modern Components 3 48 (in Chinese) [刘赞丰, 杨志刚, 何善开, 江水浩 2011 现代零部件 3 48]

    [10]

    Yang S H, Kou S Q, Gu Z W, Jin W M, Zhao Y 2000 J. Hit 32 129 (in Chinese) [杨慎华, 寇淑清, 谷诤巍, 金文明, 赵勇 2000 哈尔滨工业大学学报 32 129]

    [11]

    Kou S Q, Yang S H, Zhao Q H, Zhang Z Q 2007 J. Hit 39 1147 (in Chinese) [寇淑清, 杨慎华, 赵庆华, 张志强 2007 哈尔滨工业大学学报 39 1147]

    [12]

    Zheng L M, Kou S Q, Yang S H, Li L L, Li F 2010 Opt. Laser Technol. 42 985

    [13]

    Amit S, Vinod Y 2012 Opt. Laser Technol. 44 159

    [14]

    Lu J, Ni X W, He A Z 1996 Laser and Material Interaction Physics (Beijing: Mechanical Industry Press) pp35--37 (in Chinese) [陆建, 倪晓武, 贺安之 1996 激光与材料相互作用物理学 (北京: 机械工业出版社)第35---37页]

    [15]

    Fan T Y 1978 Fracture Mechanics (Nanjing: Jiangsu Science and Technology Press) p333 (in Chinese) [范天佑 1978 断裂力学基础 (南京: 江苏科学技术出版社) 第333页]

    [16]

    A F M Arif, Bekir Samir Yilbas Thermal 2008 Int J Adv Manuf Technol. 37 698

    [17]

    Zhang D, Harris S J, McCartney D G, Pashby I R, Powell J, Shipway P H, Voisey K T 2008 Mat. Sci. Eng. A 489 273

    [18]

    Xie D, Qian Q, Li C A 2009 Numerical Methods and Engineering Applications of Fracture Mechanics (Beijing: Science Press) p145 (in Chinese) [解德, 钱勤, 李长安 2009 断裂力学中的数值计算方法与工程应用 (北京: 科学出版社) 第145页]

    [19]

    Filippo Berto 2012 Int. J. Fatigue. 38 188

    [20]

    He D Y 2009 Ph. D. Dissertation (Changchun: Jilin University) (in Chinese) [何东野 2011 博士学位论文 (长春: 吉林大学)]

    [21]

    Zhang X Z, Cai, Q Z, Chen, Q F, Zhou, G F, Xiong Y Z 2011 Research on Iron and Steel 39 15 (in Chinese) [张贤忠, 蔡启舟, 陈庆丰, 周桂峰, 熊玉彰 2011 钢铁研究 39 15]

    [22]

    Zhang X Z, Cai, Q Z, Chen, Q F, Zhou G F, Xiong Y Z 2011 J. Mater Sci. 46 1789

    [23]

    Boo K S, Cho H S 1990 Proc. Instn. Mech. Engrs. 204 175

    [24]

    Wang J W 2011 Ph. D. Dissertation (Changchun: Jilin University) (in Chinese) [王金伟 2011 博士学位论文 (长春: 吉林大学)]

  • [1] Xu Qi, Sun Xiao-Wei, Song Ting, Wen Xiao-Dong, Liu Xi-Xuan, Wang Yi-Wen, Liu Zi-Jiang. Novel one-dimensional optomechanical crystal nanobeam with high optomechanical coupling rate under different defect states. Acta Physica Sinica, 2021, 70(22): 224210. doi: 10.7498/aps.70.20210925
    [2] Cao Ming-Peng, Wu Xiao-Peng, Guan Hong-Shan, Shan Guang-Bao, Zhou Bin, Yang Li-Hong, Yang Yin-Tang. Electrothermal coupling analysis of three-dimensional integrated microsystem based on dual cell method. Acta Physica Sinica, 2021, 70(7): 074401. doi: 10.7498/aps.70.20201628
    [3] Sun Wei-Bin, Wang Ting, Sun Xiao-Wei, Kang Tai-Feng, Tan Zi-Hao, Liu Zi-Jiang. Defect states and vibration energy recovery of novel two-dimensional piezoelectric phononic crystal plate. Acta Physica Sinica, 2019, 68(23): 234206. doi: 10.7498/aps.68.20190260
    [4] Dong Wei, Wang Zhi-Bin. Improved hybrid plasmonic microcavity laser. Acta Physica Sinica, 2018, 67(19): 195204. doi: 10.7498/aps.67.20180242
    [5] Zhao Yun-Jin, Tian Meng, Huang Yong-Gang, Wang Xiao-Yun, Yang Hong, Mi Xian-Wu. Renormalization of photon dyadic Green function by finite element method and its applications in the study of spontaneous emission rate and energy level shift. Acta Physica Sinica, 2018, 67(19): 193102. doi: 10.7498/aps.67.20180898
    [6] Guan Yi-Jun, Sun Hong-Xiang, Yuan Shou-Qi, Ge Yong, Xia Jian-Ping. Propagation characteristics of laser-generated surface acoustic waves in composite plate with gradient changes of near-surface viscous moduli. Acta Physica Sinica, 2016, 65(22): 224201. doi: 10.7498/aps.65.224201
    [7] Chen Yan, Zhou Gui-Yao, Xia Chang-Ming, Hou Zhi-Yun, Liu Hong-Zhan, Wang Chao. Analysis of a novel dual-mode large-mode-area micro-structured fiber. Acta Physica Sinica, 2014, 63(1): 014701. doi: 10.7498/aps.63.014701
    [8] Wang Yue, Liu Li-Wei, Hu Si-Yi, Li Qi-Yang, Sun Zhen-Hao, Miao Xin-Hui, Yang Xiao-Chuan, Zhang Xi-He. Simulation study based on the COMSOL Mutiphysics to the surface plasmon resonance of Cu2S quantum dots. Acta Physica Sinica, 2013, 62(19): 197803. doi: 10.7498/aps.62.197803
    [9] Yuan Ling, Sun Kai-Hua, Cui Yi-Ping, Shen Zhong-Hua, Ni Xiao-Wu. Experimental and theoretical analysis of the dispersion of laser-induced surface acoustic wave due to surface roughness. Acta Physica Sinica, 2012, 61(1): 014210. doi: 10.7498/aps.61.014210
    [10] Xiao Jin-Biao, Li Wen-Liang, Xia Sai-Sai, Sun Xiao-Han. Full-vectorial analysis of the directional couplers in horizontal multiple-slotted silicon wires with trapezoidal cross-section. Acta Physica Sinica, 2012, 61(12): 124216. doi: 10.7498/aps.61.124216
    [11] Yu Ge, Han Qi-Gang, Li Ming-Zhe, Jia Xiao-Peng, Ma Hong-An, Li Yue-Fen. Finite element analysis of the high-pressure tungsten carbide radius-anvil. Acta Physica Sinica, 2012, 61(4): 040702. doi: 10.7498/aps.61.040702
    [12] Qi Yue-Feng, Qiao Han-Ping, Bi Wei-Hong, Liu Yan-Yan. Heat transfer characteristics in fabrication of heat method in photonic crystal fiber grating. Acta Physica Sinica, 2011, 60(3): 034214. doi: 10.7498/aps.60.034214
    [13] Liu Hai-Qiang, Guo Zhen, Wang Shi-Yu, Lin Lin, Guo Long-Cheng, Li Bing-Bin, Cai De-Fang. Research on thermal contact conductance between crystal rod and heat sink in LD end-pumped solid-state laser. Acta Physica Sinica, 2011, 60(1): 014212. doi: 10.7498/aps.60.014212
    [14] Han Qi-Gang, Ma Hong-An, Xiao Hong-Yu, Li Rui, Zhang Cong, Li Zhan-Chang, Tian Yu, Jia Xiao-Peng. Finite element method study on the temperature distribution in the cell of large single crystal diamond. Acta Physica Sinica, 2010, 59(3): 1923-1927. doi: 10.7498/aps.59.1923
    [15] Liu Quan-Xi, Zhong Ming. Analysis on thermal effect of laser-diode array end-pumped composite rod laser by finite element method. Acta Physica Sinica, 2010, 59(12): 8535-8541. doi: 10.7498/aps.59.8535
    [16] Song Xiao-Lu, Guo Zhen, Li Bing-Bin, Wang Shi-Yu, Cai De-Fang, Wen Jian-Guo. Time-varying thermal effect of laser crystal in pulsed diode laser side-pumped Nd∶YAG laser. Acta Physica Sinica, 2009, 58(3): 1700-1708. doi: 10.7498/aps.58.1700
    [17] Han Qi-Gang, Jia Xiao-Peng, Ma Hong-An, Li Rui, Zhang Cong, Li Zhan-Chang, Tian Yu. Finite element simulations of thermal-stress on cemented tungsten carbide anvil used in cubic high pressure apparatus. Acta Physica Sinica, 2009, 58(7): 4812-4816. doi: 10.7498/aps.58.4812
    [18] Zheng Kai, Chang De-Yuan, Fu Yong-Jun, Wei Huai, Yan Feng-Ping, Jian Wei, Jian Shui-Sheng. Erbium-doped hole-assisted lightguide fiber: structural study and optimization. Acta Physica Sinica, 2007, 56(2): 958-967. doi: 10.7498/aps.56.958
    [19] Numerical simulation of laser-generated ultrasonic waves in steel with gradient changes of near-surface elastic property. Acta Physica Sinica, 2007, 56(12): 7058-7063. doi: 10.7498/aps.56.7058
    [20] Tian Jin-Shou, Zhao Bao-Sheng, Wu Jian-Jun, Zhao Wei, Liu Yun-Quan, Zhang Jie. Theoretical calculation of the modulation transfer function in a femoto-second electron diffraction system. Acta Physica Sinica, 2006, 55(7): 3368-3374. doi: 10.7498/aps.55.3368
Metrics
  • Abstract views:  6535
  • PDF Downloads:  693
  • Cited By: 0
Publishing process
  • Received Date:  10 November 2011
  • Accepted Date:  10 May 2012
  • Published Online:  05 May 2012

/

返回文章
返回