-
International Standard, ISO 6892-2, Metallic Materials-Tensile Testing: Method of Test at Elevated Temperature maintained that the strain rate variations and test temperature variations can induce the measurement uncertainty of mechanical properties in tensile testing, which will imperil the reliability of tension tests. In this paper, the measurement uncertainties of shrinkage rate or elongation rate in tensile testing cross-section, intermediate temperature embrittlement and strain rate embrittlement are first described experimentally. Second, the fundamental results on the microscopic theory of elastic deformation in metals are briefly mentioned. Then the phenomena of the measurement uncertainties are explained based on the microscopic theory. It is expounded that the elastic deformation of tension tests induces the impurities to segregate to grain boundaries and the relative embrittlement which produces the measurement uncertainties of reduction in area. This work gives a theoretical basis for correcting the present standard method of tension testing to avoid the measurement uncertainty of reduction in area.
[1] Zhang C L, Han P D, Wang X H, Zhang Z X, Wang L P, Xu H X 2013 Chin. Phys. B 22 126802
[2] ASTM International: 2003 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials ASTM International, Designation: E21-03a, 1
[3] International Standard 2011 ISO 6892-2, Metallic Materials-Tensile Testing Part 2: Method of Test at Elevated Temperature (1st Ed.) 9
[4] Sun D S, Yamane T, Hirao K 1991 J. Mater. Sci. 26 689
[5] Sun D S, Yamane T, Hirao K 1991 J. Mater. Sci. 26 5767
[6] Otsuka M, Horiuchi R 1984 J. Jpn. Inst. Met. 48 688
[7] Nowosielski R, Sakiewicz P, Mazurkiewicz J 2006 J. Ach. Mater. Manuf. Eng. 17 93
[8] Xu T D, Zheng L, Wang K, Misra R D K 2013 Inter. Mater. Rev. 58 263
[9] Xu T D 2009 10000 Selected Problems in Sciences: Physics (Beijing: Science Press) p523 (in Chinese) [徐庭栋 2009 10000个科学难题· 物理学卷 (北京: 科学出版社) 第523页]
[10] Suzuki H G 1997 ISIJ Inter. 37 250
[11] Xu T D, Yu H Y, Liu Z J, Zheng Z W 2013 A Technical Report for ISO TC164 2013 Annual Meeting, 1
[12] Nagasaki C, Aizawa A, Kihara J 1987 Trans. ISIJ 27 506
[13] Kumar K S, Pang L X 1998 Mater. Sci. Eng. A 258 153
[14] Xu T D 2000 J. Mater. Sci. 35 5621
[15] Xu T D 2003 Phil. Mag. 83 889
[16] Xu T D, Cheng B 2004 Prog. Mater. Sci. 49 109
[17] Xu T D 2007 Phil. Mag. 87 1581
[18] Zheng Z W, Xu T D, Wang K, Shao C 2012 Acta Phys. Sin. 61 246202 (in Chinese) [郑宗文, 徐庭栋, 王凯, 邵冲 2012 物理学报 61 246202]
[19] Zener C (translated by Kong Q P, Zhou B L, Qian Z Q, Ma Y L) 1965 Elastic and Anelastic of Metals (Beijing: Science Press) pp3-40 (in Chinese) [甄纳C著 (孔庆平, 周本濂, 钱知强, 马应良 译) 1965 金属的弹性与滞弹性 (北京: 科学出版社) 第3-40页]
[20] Shinoda T, Nakamura T 1981 Acta Metall. 29 1631
[21] Song S H, Wu J, Wang D Y, Weng L Q, Zheng L 2006 Mater. Sci. Eng. A 430 320
[22] Misra R D K 1996 Acta Mater. 44 885
[23] Horikawa K, Kuramoto S, Kanno M 2001 Acta Mater. 49 3981
-
[1] Zhang C L, Han P D, Wang X H, Zhang Z X, Wang L P, Xu H X 2013 Chin. Phys. B 22 126802
[2] ASTM International: 2003 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials ASTM International, Designation: E21-03a, 1
[3] International Standard 2011 ISO 6892-2, Metallic Materials-Tensile Testing Part 2: Method of Test at Elevated Temperature (1st Ed.) 9
[4] Sun D S, Yamane T, Hirao K 1991 J. Mater. Sci. 26 689
[5] Sun D S, Yamane T, Hirao K 1991 J. Mater. Sci. 26 5767
[6] Otsuka M, Horiuchi R 1984 J. Jpn. Inst. Met. 48 688
[7] Nowosielski R, Sakiewicz P, Mazurkiewicz J 2006 J. Ach. Mater. Manuf. Eng. 17 93
[8] Xu T D, Zheng L, Wang K, Misra R D K 2013 Inter. Mater. Rev. 58 263
[9] Xu T D 2009 10000 Selected Problems in Sciences: Physics (Beijing: Science Press) p523 (in Chinese) [徐庭栋 2009 10000个科学难题· 物理学卷 (北京: 科学出版社) 第523页]
[10] Suzuki H G 1997 ISIJ Inter. 37 250
[11] Xu T D, Yu H Y, Liu Z J, Zheng Z W 2013 A Technical Report for ISO TC164 2013 Annual Meeting, 1
[12] Nagasaki C, Aizawa A, Kihara J 1987 Trans. ISIJ 27 506
[13] Kumar K S, Pang L X 1998 Mater. Sci. Eng. A 258 153
[14] Xu T D 2000 J. Mater. Sci. 35 5621
[15] Xu T D 2003 Phil. Mag. 83 889
[16] Xu T D, Cheng B 2004 Prog. Mater. Sci. 49 109
[17] Xu T D 2007 Phil. Mag. 87 1581
[18] Zheng Z W, Xu T D, Wang K, Shao C 2012 Acta Phys. Sin. 61 246202 (in Chinese) [郑宗文, 徐庭栋, 王凯, 邵冲 2012 物理学报 61 246202]
[19] Zener C (translated by Kong Q P, Zhou B L, Qian Z Q, Ma Y L) 1965 Elastic and Anelastic of Metals (Beijing: Science Press) pp3-40 (in Chinese) [甄纳C著 (孔庆平, 周本濂, 钱知强, 马应良 译) 1965 金属的弹性与滞弹性 (北京: 科学出版社) 第3-40页]
[20] Shinoda T, Nakamura T 1981 Acta Metall. 29 1631
[21] Song S H, Wu J, Wang D Y, Weng L Q, Zheng L 2006 Mater. Sci. Eng. A 430 320
[22] Misra R D K 1996 Acta Mater. 44 885
[23] Horikawa K, Kuramoto S, Kanno M 2001 Acta Mater. 49 3981
Catalog
Metrics
- Abstract views: 7090
- PDF Downloads: 1092
- Cited By: 0
下载:
