搜索

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

SHS等离子喷涂制备FeAl2O4-Al2O3-Fe纳米复合涂层的研究

牛二武 阎殿然 何继宁 董艳春 李香芝 冯文然 张建新 张古令 杨思泽

引用本文:
Citation:

SHS等离子喷涂制备FeAl2O4-Al2O3-Fe纳米复合涂层的研究

牛二武, 阎殿然, 何继宁, 董艳春, 李香芝, 冯文然, 张建新, 张古令, 杨思泽

Preparation nanostructured FeAl2O4-Al2O3-Fe composite coating by SHS plasma spraying technology

Niu Er-Wu, Yan Dian-Ran, He Ji-Ning, Dong Yan-Chun, Li Xian-Zhi, Feng Wen-Ran, Zhang Jian-Xin, Zhang Gu-Ling, Yang Si-Ze
PDF
导出引用
  • 利用SHS等离子喷涂技术,将经过机械团聚法制备的Fe2O3-Al复合粉体送入等离子焰流,沉积出厚度约为400 μm的复合涂层.利用XRD,SEM 和TEM等检测手段对涂层的成分和组织进行了分析,测定了涂层的显微硬度、断裂韧性以及耐磨性.结果表明涂层为具有纳米结构的FeAl2O4-Al2O3-Fe纳米复合组织;涂层的显微硬度为HV100g870;断裂韧性是普通Al2O3涂层的2倍;无润滑磨损的耐磨性是普通Al2O3涂层的2.5倍.
    In this paper, composite coating (about 400 μm thick) was prepared by SHS plasma spraying technology using micro-dimensional Fe2O3-Al composite feedstock, which was fabricated by mechanical glomeration. The composition and microstructure of the coating were analyzed by X-Ray diffraction, scanning electron microscopy and transmission electron microscopy. Meanwhile, the microhardness, fracture toughness and wear resistance were also measured. It shows that the skeleton of the coating is mainly composed of nanostructured FeAl2O4 and Al2O3, and the dispersed phase is nanosized Fe. The composite coating possesses satisfactory microhardness of about Hv870. Compared with conventional alumina coating, the fracture toughness and wear resistance of composite coating are increased by one and 1.5 times, respectively.
    • 基金项目: 河北省自然科学基金(批准号:599031)资助的课题.
计量
  • 文章访问数:  6681
  • PDF下载量:  1260
  • 被引次数: 0
出版历程
  • 收稿日期:  2005-07-19
  • 修回日期:  2006-02-14
  • 刊出日期:  2006-05-05

/

返回文章
返回