搜索

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

亚波长金属偏振分束光栅设计分析

赵华君 杨守良 张东 梁康有 程正富 石东平

引用本文:
Citation:

亚波长金属偏振分束光栅设计分析

赵华君, 杨守良, 张东, 梁康有, 程正富, 石东平

Design of polarizing beam splitters based on subwavelength metal grating

Zhao Hua-Jun, Yang Shou-Liang, Zhang Dong, Liang Kang-You, Cheng Zheng-Fu, Shi Dong-Ping
PDF
导出引用
  • 结合有效介质理论和薄膜光学的抗反射设计方法,设计了基于0.65μm工作波长的亚波长金属偏振分束光栅,给出了光栅的优化设计参数,采用严格耦合波理论分析了光栅的偏振分束特性.结果表明,亚波长金属光栅对TE偏振表现为金属膜特性,具有高反射,对TM偏振表现为介质膜特性,具有高透射,在-30°<θ<30°的大入射角范围和0.47μm<λ<0.80μm的宽入射波谱内,该光栅的透射光和反射光均具有高偏振消光比和低插入损耗的特点.
    A novel approach to design the subwavelength metal gratings for the polarizing beam splitters is presented. The method is based on effective medium theory (EMT) and thin film optics. The polarizing diffraction performance of subwavelength grating was analyzed by the rigorous couple-wave analysis (RCWA) for the wavelength of 650nm. The numerical calculus is used to analyze the effects of the zeroth diffraction efficiency caused by the grating period, the groove depth, the incident angle and the incident wavelength. The results show that subwavelength metal grating have the characteristics of high reflectivity like metal films for TE polarization and high transmission like dielectric films for TM polarization. Both transmission waves and reflected waves have high polarization extinction ratio and low insertion loss over a wide incident angle range (-30°θλ<800nm). The optimal design agrees excellently well with the results simulated by RCWA method.
    • 基金项目: 重庆市教育委员会科研基金(批准号:KJ071205)资助的课题.
计量
  • 文章访问数:  8653
  • PDF下载量:  2030
  • 被引次数: 0
出版历程
  • 收稿日期:  2008-10-23
  • 修回日期:  2009-01-14
  • 刊出日期:  2009-09-20

/

返回文章
返回