-
熔石英光学元件是惯性约束核聚变点火装置的核心部件, 由于该装置严苛的点火条件对高功率激光的需求, 熔石英光学元件在强激光下的损伤是制约点火装置运行的关键. 因此, 研究激光辐照下熔石英的表面损伤对惯性约束核聚变点火装置的研制至关重要. 本文采用大规模非平衡分子动力学模拟方法和适用于动态过程的微结构分析技术, 研究激光加载下熔石英表面的损伤过程, 基于理论研究的高温等离子体火球模型模拟高温熔石英等离子体球对熔石英表面的破坏, 通过跟踪局域结构、温度分布和表面形貌状态, 分析影响熔石英表面损伤的因素. 研究表明, 高温熔石英球的尺寸、距表面的距离和温度都对熔石英表面的破坏具有重要的影响. 本文可为认识激光辐照下熔石英中复杂的损伤过程提供指导.Fused silica optical element is the core component of the inertial confinement nuclear fusion ignition device. Due to the requirement of ignition conditions of the device for high power laser, the damage to fused silica optical element under strong laser is the key to restricting the operation of the ignition device. Therefore, the study of the surface damage of fused silica irradiated by laser is crucial to the development of the ignition device for inertial confinement nuclear fusion. In this paper, large-scale non-equilibrium molecular dynamics simulation method and micro-structure analysis technology suitable for dynamic process are proposed to study the damage process of fused silica surface under laser loading. Based on the theoretical study of high-temperature plasma fireball model, the damage of high-temperature fused silica plasma ball to surface is simulated. By tracking the local structure, temperature distribution and surface morphology, the factors affecting the surface damage of fused silica are analyzed. Our research results show that the size, distance from the surface, and temperature of high-temperature fused silica balls have important effects on the surface damage. We find that there are two different damage modes under the combined effect of the above factors. One is related to a rapid damage process, generating U-shaped voids and no further obvious damages after the surface spraying, and the other is dependent of a slow damage process: continuously expanding and resulting in a larger damage area. The surface morphologies formed by these two damage modes are consistent with the two typical damage morphologies observed in the experiments. This research can provide a guidance for understanding the complex damage process in fused silica under laser irradiation.
-
Keywords:
- laser irradiation damage /
- fused silica /
- molecular dynamics
[1] Chen Q, Wang H, Dai R, Wang Z, Tao X, Zhao W, Zhang Z 2021 Laser Part. Beams 2021 6Google Scholar
[2] Bude J, Guss G, Matthews M, Spaeth M L 2007 Proc. SPIE 6720 672009Google Scholar
[3] Chai X X, Li P, Zhao J P, Wang G Z, Zhu D Y, Jiang Y L, Chen B, Zhu Q H, Feng B, Wang L Q, Jing Y K 2020 Optik 226 165549Google Scholar
[4] Zhang Y, Song C, Shi F, Tian Y, Lin Z 2020 Proc. SPIE 11427 1142745Google Scholar
[5] Schaffer C B, Brodeur A, Mazur E 2001 Meas. Sci. Technol. 12 1784Google Scholar
[6] Li B, Hou C Y, Tian C X, Guo J L, Xiang X, Jiang X L, Wang H J, Liao W, Yuan X D, Jiang X D, Zu X T 2020 Appl. Surf. Sci. 508 145186Google Scholar
[7] Tan C, Zhao L J, Chen M J, Cheng J, Yin Z Y, Liu Q, Yang H, Liao W 2021 J. Non-Cryst. Solids 558 120662Google Scholar
[8] Bercegol H, Boscheron A, Di-Nicola J M, Journot E, Lamaignere L, Neauport J, Raze G 2008 J. Phys.: Conf. Ser. 112 032013Google Scholar
[9] Shen X, Feng G Y, Jing S, Han J H, Li Y G, Liu K 2019 Chin. Phys. B 28 085202Google Scholar
[10] 韩伟, 冯斌, 郑奎兴, 朱启华, 郑万国, 巩马理 2016 物理学报 65 246102Google Scholar
Han W, Feng B, Zheng K X, Zhu Q H, Zheng W G, Gong M L 2016 Acta Phys. Sin. 65 246102Google Scholar
[11] Carr C W, Bude J D, DeMange P 2010 Phys. Rev. B 82 184304Google Scholar
[12] Carr C W, Radousky H B, Rubenchik A M, Feit M D, Demos S G 2004 Phys. Rev. Lett. 92 087401Google Scholar
[13] Demange P, Negres R, Raman R, Colvin J, Demos S 2011 Phys. Rev. B 84 054118Google Scholar
[14] Demos S G, Raman R N, Negres R A 2013 Opt. Express 21 4875Google Scholar
[15] Dijon J, Poiroux T, Desrumaux C 1997 Proc. SPIE 2966 315Google Scholar
[16] Feit M D, Rubenchik A M 2003 Mechanisms of CO2 Laser Mitigation of Laser Damage Growth in Fused Silica (Livermore, CA: Lawrence Livermore National Lab.) Report Number. UCRL-JC-148580
[17] Jiang Y, Liu H F, Zhang F W, Zhang B J, Liao W, Zhang L J, Wang H J, Qiu R, Guo D C, Zhou Q, Yao C Z 2021 Fusion Eng. Des. 173 112956Google Scholar
[18] Yan C Y, Liu B A, Li X C, Liu C, Ju X 2020 Chin. Phys. B 29 27901Google Scholar
[19] Wang H X, Wang C, Zhang M Z, Zheng E M, Chen X H 2019 Appl. Opt. 58 9839Google Scholar
[20] 郭洪岩, 刘全喜 2018 激光与红外 48 958Google Scholar
Guo H Y, Liu Q X 2018 Laser Infrared 48 958Google Scholar
[21] Wang Q S, Jiang L, Sun J P, Pan C J, Han W N, Wang G Y, Zhang H, Grigoropoulos C P, Lu Y F 2017 Photonics Res. 5 488Google Scholar
[22] Kubota A, Caturla M J, Stolken J S, Feit M 2001 Opt. Express 8 611Google Scholar
[23] Sugiura H, Ikeda R, Kondo K, Yamadaya T 1997 J. Appl. Phys. 81 1651Google Scholar
[24] Su R, Xiang M Z, Chen J, Jiang S L, Wei H 2014 J. Appl. Phys. 115 193508Google Scholar
[25] Shen R Q, Bai Q S, Li Y H, Guo Y B, Zhang F H 2020 J. Appl. Phys. 127 245114Google Scholar
[26] Dyachkov S, Parshikov A, Zhakhovsky V 2015 19th Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter Tampa, USA, June 14–19, 2015 p100024
[27] Li B, Zhao F P, Wu H A, Luo S N 2014 J. Appl. Phys. 115 349
[28] Plimpton S 1995 Comput. Mater. Sci. 4 361Google Scholar
[29] Munetoh S, Motooka T, Moriguchi K, Shintani A 2007 Comput. Mater. Sci. 39 334Google Scholar
[30] Thompson A P, Plimpton S J, Mattson W 2009 J. Chem. Phys. 131 154107Google Scholar
[31] Stukowski A 2010 Modell. Simul. Mater. Sci. Eng. 18 015012Google Scholar
[32] Barmes F, Soulard L, Mareschal M 2006 Phys. Rev. B 73 224108Google Scholar
[33] Mozzi R, Warren B 1969 J. Appl. Crystallogr. 2 164Google Scholar
[34] Wong J, Ferriera J L, Lindsey E F 2006 J. Non-Cryst. Solids 352 255Google Scholar
[35] Miller P E, Bude J D, Suratwala T I, Shen N, Laurence T A, Steele W A, Menapace J, Feit M D, Wong L L 2010 Opt. Lett. 35 2702Google Scholar
[36] Neauport J, Lamaignere L, Bercegol H 2005 Opt. Express 13 10163Google Scholar
-
图 1 熔石英初始模型的二维示意图, 红色区域温度T = 10000 K, 浅蓝色区域T = 300 K, r表示高温熔石英球的半径, d表示球面和熔石英表面之间的距离
Fig. 1. A two-dimensional schematic diagram of the initial model of fused silica, with a temperature of 10000 K in the red area and 300 K in the light blue area. r represents the radius of the high-temperature fused quartz sphere, and d represents the distance between the sphere and the surface of the fused silica.
图 3 样品不同时刻微观形貌的切面图, 颜色是根据温度来上色的, 与图2描述的是同一过程(高温球T = 10000 K, r = 20 Å, d = 15 Å)
Fig. 3. Cross-sectional view of the microstructure of the sample at different times is colored based on temperature, which is the same process as described in Fig. 2 (high temperature ball T = 10000 K, r = 20 Å, d = 15 Å).
图 5 高温球T = 10000 K, (a) r = 20 Å, d = 15 Å, (b) r = 20 Å, d = 50 Å条件下, 对应样品中减小的原子质量与样品总质量的比(被喷射出的原子质量除以模型的总质量)随时间的变化
Fig. 5. Ratio of the mass of reduced atoms in the sample to the total mass of the sample (the mass of ejected atoms divided by the total mass of the model) over time with high-temperature ball T = 10000 K, (a) r = 20 Å, d = 15 Å, (b) r = 20 Å, d = 50 Å.
图 6 高温球初始温度T = 10000 K和距表面距离d = 20 Å对应的熔石英样品发生损伤时表面的压力(a), 温度(b), 喷射出的原子的质量占总样品的比(c)随球半径r的变化
Fig. 6. Surface pressure (a), temperature (b), and the ratio of the mass of ejected atoms to the total sample (c) vary with the radius r of the ball when damage occurs to fused silica with the initial temperature of the high-temperature ball T = 10000 K and the distance from the surface d = 20 Å.
图 7 高温球半径r = 20 Å, 距表面的距离d = 20 Å, 初始温度(a) T = 10000 K, (b) T = 8000 K条件下, 对应的熔石英样品发生表面喷射后的形貌图, 红色为硅原子, 蓝色为氧原子
Fig. 7. Morphologies of the fused silica sample after surface spraying shows Si atoms in red and O atoms in blue, with high temperature ball r = 20 Å, d = 20 Å and (a) T = 10000 K, (b) T = 8000 K.
-
[1] Chen Q, Wang H, Dai R, Wang Z, Tao X, Zhao W, Zhang Z 2021 Laser Part. Beams 2021 6Google Scholar
[2] Bude J, Guss G, Matthews M, Spaeth M L 2007 Proc. SPIE 6720 672009Google Scholar
[3] Chai X X, Li P, Zhao J P, Wang G Z, Zhu D Y, Jiang Y L, Chen B, Zhu Q H, Feng B, Wang L Q, Jing Y K 2020 Optik 226 165549Google Scholar
[4] Zhang Y, Song C, Shi F, Tian Y, Lin Z 2020 Proc. SPIE 11427 1142745Google Scholar
[5] Schaffer C B, Brodeur A, Mazur E 2001 Meas. Sci. Technol. 12 1784Google Scholar
[6] Li B, Hou C Y, Tian C X, Guo J L, Xiang X, Jiang X L, Wang H J, Liao W, Yuan X D, Jiang X D, Zu X T 2020 Appl. Surf. Sci. 508 145186Google Scholar
[7] Tan C, Zhao L J, Chen M J, Cheng J, Yin Z Y, Liu Q, Yang H, Liao W 2021 J. Non-Cryst. Solids 558 120662Google Scholar
[8] Bercegol H, Boscheron A, Di-Nicola J M, Journot E, Lamaignere L, Neauport J, Raze G 2008 J. Phys.: Conf. Ser. 112 032013Google Scholar
[9] Shen X, Feng G Y, Jing S, Han J H, Li Y G, Liu K 2019 Chin. Phys. B 28 085202Google Scholar
[10] 韩伟, 冯斌, 郑奎兴, 朱启华, 郑万国, 巩马理 2016 物理学报 65 246102Google Scholar
Han W, Feng B, Zheng K X, Zhu Q H, Zheng W G, Gong M L 2016 Acta Phys. Sin. 65 246102Google Scholar
[11] Carr C W, Bude J D, DeMange P 2010 Phys. Rev. B 82 184304Google Scholar
[12] Carr C W, Radousky H B, Rubenchik A M, Feit M D, Demos S G 2004 Phys. Rev. Lett. 92 087401Google Scholar
[13] Demange P, Negres R, Raman R, Colvin J, Demos S 2011 Phys. Rev. B 84 054118Google Scholar
[14] Demos S G, Raman R N, Negres R A 2013 Opt. Express 21 4875Google Scholar
[15] Dijon J, Poiroux T, Desrumaux C 1997 Proc. SPIE 2966 315Google Scholar
[16] Feit M D, Rubenchik A M 2003 Mechanisms of CO2 Laser Mitigation of Laser Damage Growth in Fused Silica (Livermore, CA: Lawrence Livermore National Lab.) Report Number. UCRL-JC-148580
[17] Jiang Y, Liu H F, Zhang F W, Zhang B J, Liao W, Zhang L J, Wang H J, Qiu R, Guo D C, Zhou Q, Yao C Z 2021 Fusion Eng. Des. 173 112956Google Scholar
[18] Yan C Y, Liu B A, Li X C, Liu C, Ju X 2020 Chin. Phys. B 29 27901Google Scholar
[19] Wang H X, Wang C, Zhang M Z, Zheng E M, Chen X H 2019 Appl. Opt. 58 9839Google Scholar
[20] 郭洪岩, 刘全喜 2018 激光与红外 48 958Google Scholar
Guo H Y, Liu Q X 2018 Laser Infrared 48 958Google Scholar
[21] Wang Q S, Jiang L, Sun J P, Pan C J, Han W N, Wang G Y, Zhang H, Grigoropoulos C P, Lu Y F 2017 Photonics Res. 5 488Google Scholar
[22] Kubota A, Caturla M J, Stolken J S, Feit M 2001 Opt. Express 8 611Google Scholar
[23] Sugiura H, Ikeda R, Kondo K, Yamadaya T 1997 J. Appl. Phys. 81 1651Google Scholar
[24] Su R, Xiang M Z, Chen J, Jiang S L, Wei H 2014 J. Appl. Phys. 115 193508Google Scholar
[25] Shen R Q, Bai Q S, Li Y H, Guo Y B, Zhang F H 2020 J. Appl. Phys. 127 245114Google Scholar
[26] Dyachkov S, Parshikov A, Zhakhovsky V 2015 19th Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter Tampa, USA, June 14–19, 2015 p100024
[27] Li B, Zhao F P, Wu H A, Luo S N 2014 J. Appl. Phys. 115 349
[28] Plimpton S 1995 Comput. Mater. Sci. 4 361Google Scholar
[29] Munetoh S, Motooka T, Moriguchi K, Shintani A 2007 Comput. Mater. Sci. 39 334Google Scholar
[30] Thompson A P, Plimpton S J, Mattson W 2009 J. Chem. Phys. 131 154107Google Scholar
[31] Stukowski A 2010 Modell. Simul. Mater. Sci. Eng. 18 015012Google Scholar
[32] Barmes F, Soulard L, Mareschal M 2006 Phys. Rev. B 73 224108Google Scholar
[33] Mozzi R, Warren B 1969 J. Appl. Crystallogr. 2 164Google Scholar
[34] Wong J, Ferriera J L, Lindsey E F 2006 J. Non-Cryst. Solids 352 255Google Scholar
[35] Miller P E, Bude J D, Suratwala T I, Shen N, Laurence T A, Steele W A, Menapace J, Feit M D, Wong L L 2010 Opt. Lett. 35 2702Google Scholar
[36] Neauport J, Lamaignere L, Bercegol H 2005 Opt. Express 13 10163Google Scholar
计量
- 文章访问数: 3279
- PDF下载量: 79
- 被引次数: 0