搜索

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

多孔介质内气泡Ostwald熟化特性三维孔网数值模拟

张沐安 王进卿 吴睿 冯致 詹明秀 徐旭 池作和

引用本文:
Citation:

多孔介质内气泡Ostwald熟化特性三维孔网数值模拟

张沐安, 王进卿, 吴睿, 冯致, 詹明秀, 徐旭, 池作和

Three-dimensional numerical simulation of Ostwald ripening characteristics of bubbles in porous medium

Zhang Mu-An, Wang Jin-Qing, Wu Rui, Feng Zhi, Zhan Ming-Xiu, Xu Xu, Chi Zuo-He
PDF
HTML
导出引用
  • 多孔介质内气泡的Ostwald熟化行为广泛存在于CO2地质封存、多孔材料制备、燃料电池等领域. 为探究孔隙尺度下多孔介质内气泡的熟化特性, 建立了基于浓度耦合计算的三维孔隙网络模型, 该模型考虑了气泡形态、多孔介质结构以及气液之间的传质, 通过求解三维孔隙网络内各孔体的气相浓度, 得到各气泡的演化过程, 并采用四孔隙结构微流体芯片可视化实验验证了模型的可靠性. 为分析多孔介质非均质性对气泡熟化过程影响, 构建了两种不同孔隙尺寸的三维孔网结构, 对两个区域内的气泡熟化过程进行了数值模拟. 结果表明: 气泡初始分布会对熟化过程产生影响, 当气泡非均匀分布时, 气泡从小孔隙区域传输至大孔隙区域的同时, 也会各自向自身区域的大气泡区域传质; 气泡初始尺寸的差异, 会加速熟化进程, 使熟化时间明显短于均匀分布状态. 孔隙数的选取对平均毛细力、饱和度等连续尺度等效参数具有显著影响, 孔隙数增加时毛细力与饱和度呈现更具规律性的非线性变化. 该模型的建立可以预测地质封存过程中CO2的演化过程, 为CO2长期封存过程中非均质性的影响机制研究提供指导.
    Ostwald ripening behaviors of bubbles in porous medium are observed commonly in various fields, including CO2 geological storage, preparation of porous materials, and fuel cells. A three-dimensional pore network model based on concentration coupling calculation has been developed to investigate the ripening characteristics of bubbles in porous medium on a pore scale. This model takes into account the shape of bubble, the structure of porous medium, and mass transfer between gas and liquid. By solving the gas phase concentration of each pore body in the three-dimensional pore network, the model can track the evolution process of each bubble. A microfluidic chip with a four-pore structure is used to validate the reliability of the model through visual experiments. To analyze the effect of porous medium heterogeneity on the bubble ripening process, two different three-dimensional pore network structures with varying pore sizes are constructed and the ripening processes of bubbles in two regions are simulated numerically. The results show that the initial distribution of bubbles can affect the ripening process of porous medium. When bubbles are uniformly distributed, in the ripening process, they exhibit regular and systematic changes in their spacing. However, in the case of uneven bubble distribution, as the bubbles transfer from smaller pore region to larger pore region, they also undergo individual mass transfer towards the larger bubble region in their respective areas. Consequently, the remaining bubbles no longer maintain a spaced distribution pattern. Additionally, the differences in initial size among bubbles can accelerate the ripening process, resulting in a significantly shorter ripening time than that in a uniform distribution. The choice of pore number has a significant influence on continuous-scale equivalent parameters, such as average capillary pressure and saturation. As the number of pores increases, the capillary pressure and saturation exhibit a more regular, nonlinear variation. A relationship between capillary pressure and saturation in the small pore region and in the large pore region are established, which deviate from the assumptions made in the existing literature. This result provides important guidance for constructing the continuous-scale ripening model that can be used to predict the evolution process of CO2 during geological storage and provide guidance for studying the influence mechanism of heterogeneity during long-term CO2 storage.
      通信作者: 王进卿, jqwang@cjlu.edu.cn
    • 基金项目: 国家自然科学基金(批准号: 52006207)和浙江省自然科学基金(批准号: LQ20E060005)资助的课题.
      Corresponding author: Wang Jin-Qing, jqwang@cjlu.edu.cn
    • Funds: Project supported by the National Natural Science Foundation of China (Grant No. 52006207) and the Natural Science Foundation of Zhejiang Province, China (Grant No. LQ20E060005).
    [1]

    Chang F M, Sheng Y J, Cheng S L, Tsao H K 2008 Appl. Phys. Lett. 92 264102Google Scholar

    [2]

    宋保维, 任峰, 胡海豹, 郭云鹤 2014 物理学报 63 054708Google Scholar

    Song B W, Ren F, Hu H B, Guo Y H 2014 Acta Phys. Sin. 63 054708Google Scholar

    [3]

    Feng L, Zhang Z Y, Mai Z H, Ma Y M, Liu B Q, Jiang L, Zhu D B 2004 Angew. Chem. Int. Ed. 43 2012Google Scholar

    [4]

    Lautze N C, Sisson T W, Mangan M T, Grove T L 2010 Contrib. Mineral Petrol. 161 331Google Scholar

    [5]

    Masotta M, Ni H, Keppler H 2014 Contrib. Mineral. Petrol. 167 976Google Scholar

    [6]

    Huang Z D, Su M, Yang Q, Li Z, Chen S R, Li Y F, Zhou X, Li F Y, Song Y L 2017 Nat. Commun. 8 14110Google Scholar

    [7]

    严达利, 李申予, 刘士余, 竺云 2015 物理学报 64 137104Google Scholar

    Yan D L, Li S Y, Liu S Y, Zhu Y 2015 Acta Phys. Sin. 64 137104Google Scholar

    [8]

    Bachu S 2008 Prog. Energy Combust. Sci. 34 254Google Scholar

    [9]

    Singh D, Friis H A, Jettestuen E, Helland J O 2022 Transport Porous Med. 145 441Google Scholar

    [10]

    Iglauer S, Pentland C H, Busch A 2015 Water Resour Res. 51 729Google Scholar

    [11]

    Rahman T, Lebedev M, Barifcani A, Iglauer S 2016 J. Colloid Interface Sci. 469 63Google Scholar

    [12]

    Lifshitz I M, Slyozov V V 1961 J. Phys. Chem. Solids. 19 35Google Scholar

    [13]

    Voorhees P W 1992 Annu. Rev. Mater. Sci. 22 197Google Scholar

    [14]

    Burlakov V M 2006 Phys. Rev. Lett. 97 155703Google Scholar

    [15]

    Schmelzer J, Schweitzer F 1987 J. Non-Equilib. Thermodyn. 12 255Google Scholar

    [16]

    Xu R N, Li R, Huang F, Jiang P X 2017 Sci. Bull. 62 795Google Scholar

    [17]

    Xu K, Liang T B, Zhu P X, Qi P P, Lu J, Huh C, Balhoff M 2017 Lab. Chip. 17 640Google Scholar

    [18]

    Li Y, Garing C, Benson S M 2020 J. Fluid Mech. 889 A14Google Scholar

    [19]

    Blunt M J, Bijeljic B, Dong H, Gharbi O, Iglauer S, Mostaghimi P, Paluszny A, Pentland C 2013 Adv. Water Resour. 51 197Google Scholar

    [20]

    Golparvar A, Zhou Y, Wu K, Ma J, Yu Z 2018 Adv. Geo. Energy Res. 2 418Google Scholar

    [21]

    Kohanpur A H, Valocchi A J 2020 Transport. Porous Med. 135 659Google Scholar

    [22]

    Xu K, Mehmani Y, Shang L, Xiong Q 2019 Geophy. Res. Lett. 46 13804Google Scholar

    [23]

    Xu K, Bonnecaze R, Balhoff M 2017 Phys. Rev. Lett. 119 264502Google Scholar

    [24]

    Mehmani Y, Xu K 2022 J. Comput. Phys. 457 111041Google Scholar

    [25]

    de Chalendar J A, Garing C, Benson S M 2017 Energy Procedia. 114 4857Google Scholar

    [26]

    Vorst H A 1992 SIAM J. Sci. Stat. Comput. 13 631Google Scholar

    [27]

    Pallas N R, Pethica B A 1983 Colloid Surface 6 221Google Scholar

    [28]

    Versteeg G F, Van Swaaij W P M 1988 J. Chem. Eng. Data. 33 29Google Scholar

    [29]

    周志毅, 王进卿, 王广鑫, 池作和, 翁煜侃 2022 化工进展 41 1265Google Scholar

    Zhou Z Y, Wang J Q, Wang G X, Chi Z H, Weng Y K 2022 Chem. Ind. Eng. Prog. 41 1265Google Scholar

    [30]

    Blunt M J 2022 Phys. Rev. E 106 045103Google Scholar

    [31]

    McClure J E, Berrill M A, Gray W G, Miller C T 2016 Phys. Rev. E 94 033102Google Scholar

  • 图 1  双气泡系统传质过程

    Fig. 1.  Two-bubble system mass transfer process.

    图 2  计算程序算法流程图

    Fig. 2.  Flow chart for the calculation algorithm.

    图 3  数值计算模型 (a)孔体i内为气泡; (b)孔体i内为液相

    Fig. 3.  Numerical calculation model: (a) Pore body i with a bubble; (b) pore body i filled with liquid phase.

    图 4  多孔隙结构熟化模型

    Fig. 4.  Multi bubble ripening model.

    图 5  微流控芯片内部结构

    Fig. 5.  Internal structure of microfluidic chip.

    图 6  四孔隙结构气泡熟化过程 (a)实验过程; (b)模拟过程

    Fig. 6.  Four bubble ripening system: (a) Experiments process; (b) simulations process.

    图 7  四孔隙结构气泡半径随时间变化

    Fig. 7.  Evolution of curvature radius in four bubble ripening system.

    图 8  工况1#模拟结果 (a)气泡演化过程, 其中白色区域为CO2气泡, 蓝色区域为去离子水, 灰色区域为硅颗粒; (b) CO2气泡曲率半径变化图

    Fig. 8.  Simulation results of condition 1#: (a) Bubble evolution process, where the white regions are CO2 bubble, blue regions are filled with DI water, and the gray regions are silicon grains; (b) curvature radius variation diagram of each CO2 bubble.

    图 9  一维孔隙结构气泡熟化过程

    Fig. 9.  Bubble evolution process of one-dimensional structure.

    图 10  工况2#模拟结果 (a)第1层和第5层气泡演化过程; (b)第1层和第5层CO2气泡曲率半径变化; (c)第2层和第4层气泡演化过程; (d)第2层和第4层CO2气泡曲率半径变化; (e)第3层气泡演化过程; (f)第3层CO2气泡曲率半径变化

    Fig. 10.  Simulation results of condition 2#: (a) Bubble evolution process in layers 1 and 5; (b) curvature radius variation of each CO2 bubble in layers 1 and 5; (c) bubble evolution process in layers 2 and 4; (d) curvature radius variation of each CO2 bubble in layers 2 and 4; (e) bubble evolution process in layer 3; (f) curvature radius variation of each CO2 bubble in layer 3.

    图 11  CO2气泡各参数变化图 (a)毛细力; (b) CO2饱和度

    Fig. 11.  Variation diagram of CO2 bubble parameters: (a) Capillary pressure; (b) CO2 saturation.

    图 12  气泡毛细力与CO2饱和度关系对比图 (a)小孔隙区域; (b)大孔隙区域

    Fig. 12.  Comparison of capillary pressure with CO2 saturation curves: (a) Small pore region; (b) large pore region.

    表 1  模拟工况参数

    Table 1.  Simulation parameters of three conditions.

    工况行数列数层数孔体总数各层气泡初始半径 R/μm
    1, 234, 5
    1#大孔隙区域545100252525
    小孔隙区域955225101010
    2#大孔隙区域545100253525
    小孔隙区域955225101510
    3#大孔隙区域1032103200252525
    小孔隙区域1940107600101010
    下载: 导出CSV

    表 2  四孔隙及多孔隙结构气泡熟化模拟参数

    Table 2.  Simulation parameters of four bubble and muti bubble ripening system.

    参数符号 /单位数值
    液相压力P/Pa1.013×105
    环境温度T/K298
    CO2密度ρ/(kg·m–3)1.98
    CO2摩尔质量M/(g·mol–1)44.0
    去离子水表面张力[27]σ/(mN·m–1)71.97
    扩散系数[28]D/(m2·s–1)2.02×10–9
    亨利系数[28]H/(Pa·m3·kg–1)6.5×104
    下载: 导出CSV
  • [1]

    Chang F M, Sheng Y J, Cheng S L, Tsao H K 2008 Appl. Phys. Lett. 92 264102Google Scholar

    [2]

    宋保维, 任峰, 胡海豹, 郭云鹤 2014 物理学报 63 054708Google Scholar

    Song B W, Ren F, Hu H B, Guo Y H 2014 Acta Phys. Sin. 63 054708Google Scholar

    [3]

    Feng L, Zhang Z Y, Mai Z H, Ma Y M, Liu B Q, Jiang L, Zhu D B 2004 Angew. Chem. Int. Ed. 43 2012Google Scholar

    [4]

    Lautze N C, Sisson T W, Mangan M T, Grove T L 2010 Contrib. Mineral Petrol. 161 331Google Scholar

    [5]

    Masotta M, Ni H, Keppler H 2014 Contrib. Mineral. Petrol. 167 976Google Scholar

    [6]

    Huang Z D, Su M, Yang Q, Li Z, Chen S R, Li Y F, Zhou X, Li F Y, Song Y L 2017 Nat. Commun. 8 14110Google Scholar

    [7]

    严达利, 李申予, 刘士余, 竺云 2015 物理学报 64 137104Google Scholar

    Yan D L, Li S Y, Liu S Y, Zhu Y 2015 Acta Phys. Sin. 64 137104Google Scholar

    [8]

    Bachu S 2008 Prog. Energy Combust. Sci. 34 254Google Scholar

    [9]

    Singh D, Friis H A, Jettestuen E, Helland J O 2022 Transport Porous Med. 145 441Google Scholar

    [10]

    Iglauer S, Pentland C H, Busch A 2015 Water Resour Res. 51 729Google Scholar

    [11]

    Rahman T, Lebedev M, Barifcani A, Iglauer S 2016 J. Colloid Interface Sci. 469 63Google Scholar

    [12]

    Lifshitz I M, Slyozov V V 1961 J. Phys. Chem. Solids. 19 35Google Scholar

    [13]

    Voorhees P W 1992 Annu. Rev. Mater. Sci. 22 197Google Scholar

    [14]

    Burlakov V M 2006 Phys. Rev. Lett. 97 155703Google Scholar

    [15]

    Schmelzer J, Schweitzer F 1987 J. Non-Equilib. Thermodyn. 12 255Google Scholar

    [16]

    Xu R N, Li R, Huang F, Jiang P X 2017 Sci. Bull. 62 795Google Scholar

    [17]

    Xu K, Liang T B, Zhu P X, Qi P P, Lu J, Huh C, Balhoff M 2017 Lab. Chip. 17 640Google Scholar

    [18]

    Li Y, Garing C, Benson S M 2020 J. Fluid Mech. 889 A14Google Scholar

    [19]

    Blunt M J, Bijeljic B, Dong H, Gharbi O, Iglauer S, Mostaghimi P, Paluszny A, Pentland C 2013 Adv. Water Resour. 51 197Google Scholar

    [20]

    Golparvar A, Zhou Y, Wu K, Ma J, Yu Z 2018 Adv. Geo. Energy Res. 2 418Google Scholar

    [21]

    Kohanpur A H, Valocchi A J 2020 Transport. Porous Med. 135 659Google Scholar

    [22]

    Xu K, Mehmani Y, Shang L, Xiong Q 2019 Geophy. Res. Lett. 46 13804Google Scholar

    [23]

    Xu K, Bonnecaze R, Balhoff M 2017 Phys. Rev. Lett. 119 264502Google Scholar

    [24]

    Mehmani Y, Xu K 2022 J. Comput. Phys. 457 111041Google Scholar

    [25]

    de Chalendar J A, Garing C, Benson S M 2017 Energy Procedia. 114 4857Google Scholar

    [26]

    Vorst H A 1992 SIAM J. Sci. Stat. Comput. 13 631Google Scholar

    [27]

    Pallas N R, Pethica B A 1983 Colloid Surface 6 221Google Scholar

    [28]

    Versteeg G F, Van Swaaij W P M 1988 J. Chem. Eng. Data. 33 29Google Scholar

    [29]

    周志毅, 王进卿, 王广鑫, 池作和, 翁煜侃 2022 化工进展 41 1265Google Scholar

    Zhou Z Y, Wang J Q, Wang G X, Chi Z H, Weng Y K 2022 Chem. Ind. Eng. Prog. 41 1265Google Scholar

    [30]

    Blunt M J 2022 Phys. Rev. E 106 045103Google Scholar

    [31]

    McClure J E, Berrill M A, Gray W G, Miller C T 2016 Phys. Rev. E 94 033102Google Scholar

  • [1] 金燕, 石子璇, 金奕扬, 田文得, 张天辉, 陈康. 有限多孔介质诱导活性哑铃的聚集行为. 物理学报, 2024, 73(16): 160502. doi: 10.7498/aps.73.20240784
    [2] 刘高洁, 邵子宇, 娄钦. 多孔介质中含溶解反应的互溶驱替过程格子Boltzmann研究. 物理学报, 2022, 71(5): 054702. doi: 10.7498/aps.71.20211851
    [3] 陈效鹏, 冯君鹏, 胡海豹, 杜鹏, 王体康. 基于格子Boltzmann方法的二维汽泡群熟化过程模拟. 物理学报, 2022, (): . doi: 10.7498/aps.71.20212183
    [4] 陈效鹏, 冯君鹏, 胡海豹, 杜鹏, 王体康. 基于格子Boltzmann方法的二维气泡群熟化过程模拟. 物理学报, 2022, 71(11): 110504. doi: 10.7498/aps.70.20212183
    [5] 刘高洁, 邵子宇, 娄钦. 多孔介质中含有溶解反应的互溶驱替过程格子Boltzmann研究. 物理学报, 2021, (): . doi: 10.7498/aps.70.20211851
    [6] 唐国智, 汪垒, 李顶根. 使用条件生成对抗网络生成预定导热率多孔介质. 物理学报, 2021, 70(5): 054401. doi: 10.7498/aps.70.20201061
    [7] 张先飞, 王玲玲, 朱海, 曾诚. 自由流体层与多孔介质层界面的盐指现象的统一域法模拟. 物理学报, 2020, 69(21): 214701. doi: 10.7498/aps.69.20200351
    [8] 张陶然, 莫润阳, 胡静, 陈时, 王成会, 郭建中. 弹性介质包围的球形液体腔中气泡和粒子的相互作用. 物理学报, 2020, 69(23): 234301. doi: 10.7498/aps.69.20200764
    [9] 娄钦, 黄一帆, 李凌. 不可压幂律流体气-液两相流格子Boltzmann 模型及其在多孔介质内驱替问题中的应用. 物理学报, 2019, 68(21): 214702. doi: 10.7498/aps.68.20190873
    [10] 仇浩淼, 夏唐代, 何绍衡, 陈炜昀. 流体/准饱和多孔介质中伪Scholte波的传播特性. 物理学报, 2018, 67(20): 204302. doi: 10.7498/aps.67.20180853
    [11] 贾宇鹏, 王景甫, 郑坤灿, 张兵, 潘刚, 龚志军, 武文斐. 应用粒子图像测试技术测量球床多孔介质单相流动的流场. 物理学报, 2016, 65(10): 106701. doi: 10.7498/aps.65.106701
    [12] 刘高洁, 郭照立, 施保昌. 多孔介质中流体流动及扩散的耦合格子Boltzmann模型. 物理学报, 2016, 65(1): 014702. doi: 10.7498/aps.65.014702
    [13] 王平, 尹玉真, 沈胜强. 三维有序排列多孔介质对流换热的数值研究. 物理学报, 2014, 63(21): 214401. doi: 10.7498/aps.63.214401
    [14] 梁善勇, 王江安, 张峰, 吴荣华, 宗思光, 王雨虹, 王乐东. 基于舰船尾流激光雷达的Monte Carlo模型及方差消减方法研究. 物理学报, 2013, 62(1): 015205. doi: 10.7498/aps.62.015205
    [15] 郑坤灿, 温治, 王占胜, 楼国锋, 刘训良, 武文斐. 前沿领域综述多孔介质强制对流换热研究进展. 物理学报, 2012, 61(1): 014401. doi: 10.7498/aps.61.014401
    [16] 员美娟, 郁伯铭, 郑伟, 袁洁. 多孔介质中卡森流体的分形分析. 物理学报, 2011, 60(2): 024703. doi: 10.7498/aps.60.024703
    [17] 赵明, 郁伯铭. 基于分形多孔介质三维网络模型的非混溶两相流驱替数值模拟. 物理学报, 2011, 60(9): 098103. doi: 10.7498/aps.60.098103
    [18] 罗莹莹, 詹杰民, 李毓湘. 多孔介质中盐指现象的数值模拟. 物理学报, 2008, 57(4): 2306-2313. doi: 10.7498/aps.57.2306
    [19] 蒋 丹, 李松晶, 包 钢. 采用遗传算法对压力脉动过程中气泡模型参数的辨识. 物理学报, 2008, 57(8): 5072-5080. doi: 10.7498/aps.57.5072
    [20] 崔志文, 王克协, 曹正良, 胡恒山. 多孔介质BISQ模型中的慢纵波. 物理学报, 2004, 53(9): 3083-3089. doi: 10.7498/aps.53.3083
计量
  • 文章访问数:  3570
  • PDF下载量:  71
  • 被引次数: 0
出版历程
  • 收稿日期:  2023-04-28
  • 修回日期:  2023-05-31
  • 上网日期:  2023-06-14
  • 刊出日期:  2023-08-20

/

返回文章
返回