-
The spatial attitude and dynamic performance of the cold mass support system for superconducting magnets are critical for engineering applications. This study aims to derive a design method for the spatial attitude of tie rods through a series of theoretical derivations and simulations, enabling superconducting magnets to possess a certain degree of dynamic environmental adaptability. This paper first constructs a mathematical model of the three-dimensional cold mass support system under impact loads. Stress formulas for the tie rod under vertical 5g, axial 3g, and lateral 3g impact loads are derived. Based on this, a penalty term for stress differences is introduced to construct the objective function, and the spatial inclination angle of the tie rod is optimised. After determining the acute angle between the tie rod and the coordinate axis, the cold mass support structure exhibits four different attitudes. In order to keep the natural frequency of the magnet far away from the main excitation frequency band of vehicle transportation, this paper uses the finite element method to perform modal analysis and proposes a method for posture design based on the principle of maximising the first-order natural frequency. Finally, random vibration simulations are conducted for the vibration environment of highway transportation. Reference points are established at both ends of the axis of the magnet body components and the room-temperature tube axis. The displacement response PSD curves and root mean square values of the reference points during vibration are analysed. The conclusions of this study are as follows:1) When the acute angles α, β, and γ formed by the tie rod with the vertical, axial, and lateral directions are 31.22°, 68.50°, and 68.50°, respectively, the mechanical performance of the three-dimensional cold mass support system reaches its optimal state. 2) When the tie rod is installed in the (a) spatial attitude configuration, the first-order natural frequency of the cold mass system is highest, with a value of 125.99 Hz. 3) During long-distance integrated vehicle transportation, the maximum values of the vertical and lateral displacements of the magnet assembly axis relative to the room-temperature tube axis are both less than 0.1 mm. The maximum stress locations are both at the root of the carbon fibre tie rod, far below the strength limit of carbon fibre composite materials, indicating that the superconducting magnet possesses a certain degree of dynamic environmental adaptability. The analysis results provide theoretical guidance and data support for the structural safety and stability of this type of superconducting magnet during long-distance integrated vehicle transportation.
-
[1] Bottura L, Gourlay S A, Yamamoto A, Zlobin A V 2015 IEEE Trans. Nucl. Sci. 63 751
[2] Wang Y S 2011 The Basics of Superconducting Power Technology (1st edn.) (Beijing:Science Press) pp6-8 (in Chinese) [王银顺 2011 超导电力技术基础(第一版)(北京:科学出版社) 第6-8页]
[3] Jiang X H, Xue J, Huang W C, Li Y 2024 Acta Phys. Sin. 52 6（in Chinese） [蒋晓华，薛芃，黄伟灿，李烨 2024 物理学报52 6]
[4] Wang Q L 2007 The science of high-field superconducting magnets (Beijing:Science Press) pp24-37 (in Chinese) [王秋良 2007 高磁场超导磁体科学(北京:科学出版社) 第24-37页]
[5] Wang L, Wu H, Li S Y, Guo X L, Pan H, Zheng S X, Green M A 2011 IEEE Trans. Appl. Supercond. 21 2259
[6] Green M A, Bangerter R O 2001 IEEE Trans. Appl. Supercond. 11 1502
[7] Chen S Z, Wang Q L, Sun W S, Sun J S, Cheng J S 2023 Trans. China Electrotech. Soc. 38 879（in Chinese） [陈顺中，王秋良，孙万硕，孙金水，程军胜 2023 电工技术学报38 879]
[8] Hao G J, Zhu Y F, Fan J P, He K, Xie J, Liu P, Zhang Y, Xi W B 2024 Cryog. Supercond. 52 6（in Chinese） [郝国健，朱银锋，范吉鹏，何坤，谢杰，刘鹏，张玉，奚维斌 2024 低温与超导52 6]
[9] Wu J R 2023 Ph. D. Dissertation (Hefei: University of Science and Technology of China) (in Chinese) [吴军荣 2023 博士学位论文 (合肥:中国科学技术大学)]
[10] Liu Y Y 2018 Ph. D. Dissertation (Shanghai: Shanghai Institute of Applied Physics, Chinese Academy of Sciences) (in Chinese) [刘以勇 2018 博士学位论文 (上海:中国科学院上海应用物理研究所)]
[11] Dai Z 2017 M.S. Thesis ( Beijing: The Institute of High Energy Physics of the Chinese Academy of Sciences) (in Chinese) [戴忠 2017 硕士学位论文 (北京:中国科学院高能物理研究所)]
[12] Li L K, Wang Q L, Zhao B Z, Ni Z P, Cui C Y, Wang H S 2011 IEEE Trans. Appl. Supercond. 21 3640
[13] Zhang K, Zhu Z, Zhao L, Hou Z L, Wang M F, Zhang G Q, Yao W C, Ning F P, Wang Z J, Zhang X T 2014 IEEE Trans. Appl. Supercond. 25 1
[14] Zhang K, Zhu Z, Zhang G Q, Dai Z, Mu Z H, Wang M F, Zhao L 2016 IEEE Trans. Appl. Supercond. 26 1
[15] Huang L K, Wang Q L, Zhao B Z, Wang H, Li L K, Li Y 2011 Cryog. Supercond. 39 22（in Chinese） [黄礼凯，王秋良，赵保志，王晖，李兰凯，李毅 2011 低温与超导39 22]
[16] Xu C, Liu H, Liu J H, Dai Y M, Chen S Z, Cheng J S, Wang Q L, Huo S F, Shi Y C, Huang H J 2024 HPL Part. Beams 36 80（in Chinese） [徐策，刘辉，刘建华，戴银明，陈顺中，程军胜，王秋良，霍少飞，史彦超，黄慧杰 2024 强激光与粒子束36 80]
[17] Hopkins R A, Payne D A 1987 Cryogenics 27 209
[18] Fan Z D, Xu C, Zou W, Wang H, Zheng Y C, Chen S Z, Cheng J S, Wang Q L 2025 Phys.C 634
[19] Zhang K 2014 M.S. Thesis ( Beijing: The Institute of High Energy Physics of the Chinese Academy of Sciences) (in Chinese) [张恺 2014 硕士学位论文 (北京:中国科学院高能物理研究所)]
[20] Wang X W, Zhu Z A, Wang M L, Zhao L, Liu X Y, Xie Z T, Sun L T, Zhang G Q 2020 Cryog. 2020 11（in Chinese） [王校威，朱自安，王梦琳，赵玲，刘旭洋，谢宗泰，孙丽婷，张国庆 2020 低温工程 11]
[21] Yin J 2012 M.S. Thesis ( Harbin: Harbin Institute of Technology) (in Chinese) [殷赳 2012 硕士学位论文 (哈尔滨:哈尔滨工业大学)]
[22] Chen Y X 2024 ANSYS Workbench 2024 Finite Element Analysis: From Beginner to Expert (Beijing:Publishing House of Electronics Industry) p274 (in Chinese) [陈艳霞 2024 ANSYS Workbench 2024 有限元分析从入门到精通(北京:电子工业出版社) 第274页]
[23] Li Y T 2020 Mechanical Vibration Theory and Applications (Beijing:Science Press) p413 (in Chinese) [李有堂 2020 机械振动理论与应用(北京:科学出版社) 第413页]
Metrics
- Abstract views: 95
- PDF Downloads: 2
- Cited By: 0
下载:
