搜索

x

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

不同荷载作用下二维硼烯的力学性能及变形破坏机理

韩同伟 李选政 赵泽若 顾叶彤 马川 张小燕

引用本文:
Citation:

不同荷载作用下二维硼烯的力学性能及变形破坏机理

韩同伟, 李选政, 赵泽若, 顾叶彤, 马川, 张小燕

Mechanical properties and deformation mechanisms of two-dimensional borophene under different loadings

Han Tong-Wei, Li Xuan-Zheng, Zhao Ze-Ruo, Gu Ye-Tong, Ma Chuan, Zhang Xiao-Yan
PDF
HTML
导出引用
  • 二维硼烯具有丰富的物理和化学性质, 在凝聚态物理和材料科学等领域引起了广泛的研究兴趣, 但硼烯在不同荷载作用下的力学性能和变形破坏机理仍需进一步研究. 本文采用分子动力学方法模拟了硼烯的拉伸、剪切和纳米压痕破坏过程, 获得了硼烯的关键力学性能参数, 并从两种不同类型的B—B键长随应变/压入深度的变化规律分析了硼烯在不同载荷作用下的力学性能和变形破坏机理. 研究发现, 硼烯的拉伸力学性能表现出显著的各向异性特性, 沿扶手椅方向的杨氏模量和强度远高于沿锯齿方向, 而硼烯的剪切力学性能的各向异性特性不明显, 产生以上现象的原因可归因于强σ键B—B键和弱多中心键的不同贡献. 研究还发现, 硼烯在球形和圆柱形压头载荷作用下表现出不同的力学响应规律. 在球形压头载荷作用下, 硼烯能承受的最大压入载荷远低于圆柱形压头的情况, 而且无法测得与拉伸一致的本征力学性能参数, 而采用圆柱形压头沿不同的方向压入硼烯薄膜时, 硼烯也表现出与拉伸时类似的各向异性特性, 并且可以测得与拉伸时一致的杨氏模量等力学性能参数. 本文还研究了压痕模型尺寸与压头半径的比值、压头加载速率和加载温度等因素对硼烯力学性能参数的影响规律. 以上研究结果可为基于硼烯的微/纳米机电系统的实际应用提供重要指导.
    Two-dimensional (2D) borophene has attracted widespread research interest in condensed matter physics and materials science because of its rich physical and chemical properties. However, the mechanical properties and deformation mechanisms of borophene under different loadings are still unclear and not thoroughly investigated. In this work, the tensile, shear, and nanoindentation failure processes of borophene are simulated via molecular dynamics method to obtain the key mechanical parameters of borophene. The mechanical response and deformation mechanism of borophene under different loads are analyzed from the change of B—B bond length with the strain/indentation depth. The results show that the tensile mechanical properties of borophene exhibit significant anisotropic characteristics, with the Young’s modulus and strength along the armchair direction being much higher than those along the zigzag direction. However, the anisotropy of the shear mechanical properties of borophene is not significant. This phenomenon can be attributed to the different contributions of the strong B—B σ bonds and weak multi-center bonds in borophene when they are stretched in different directions. It is also found that borophene exhibits different mechanical responses under spherical indentation and cylindrical indentation. The force at failure of the borophene under spherical indentation is much lower than the value under cylindrical one, and the intrinsic mechanical parameters of borophene under spherical indentation cannot be estimated accurately because of the anisotropic characteristics of borophene. However, under cylindrical indentation, borophene exhibits similar anisotropic characteristics to those under tension, and the mechanical parameters such as Young’s modulus can be measured accurately, which are consistent with those obtained under tension. In addition, the effects of the borophene indentation model and spherical/cylindrical indenter size, the loading rate and temperature on the mechanical parameters of borophene are also studied systematically. The results indicate that the Young’s modulus of borophene from spherical indentation is highly estimated when a/R < 15 but not sensitive when a/R > 15, while the results from cylindrical indentation are hardly affected by the values of L/R and W/L. The Young’s modulus of borophene slightly decreases with temperature increasing, while the loading rate has almost no influence on the value of Young’s modulus of borophene. These findings are expected to provide important guidelines for realizing the practical applications of borophene based micro/nano electromechanical systems.
      通信作者: 韩同伟, twhan@ujs.edu.cn
    • 基金项目: 江苏省高等学校自然科学研究重大项目(批准号: 17KJA130001)资助的课题.
      Corresponding author: Han Tong-Wei, twhan@ujs.edu.cn
    • Funds: Project supported by the Major Program of Natural Science Foundation of Jiangsu Higher Education Institutions of China (Grant No. 17KJA130001).
    [1]

    Novoselov K S, Geim A K, Morozov S V, Jiang D, Zhang Y, Dubonos S V, Grigorieva I V, Firsov A A 2004 Science 306 666Google Scholar

    [2]

    Bianco E, Butler S, Jiang S, Restrepo O D, Windl W, Goldberger J E 2013 ACS nano 7 4414Google Scholar

    [3]

    Vogt P, De Padova P, Quaresima C, Avila J, Frantzeskakis E, Asensio M C, Resta A, Ealet B, Le Lay G 2012 Phys. Rev. Lett. 108 155501Google Scholar

    [4]

    Bertolazzi S, Brivio J, Kis A 2011 ACS Nano 5 9703Google Scholar

    [5]

    Liu H, Neal A T, Zhu Z, Luo Z, Xu X, Tománek D, Ye P D 2014 ACS nano 8 4033Google Scholar

    [6]

    Feng B J, Zhang J, Zhong Q, Li W B, Li S, Li H, Cheng P, Meng S, Chen L, Wu K H 2016 Nat. Chem. 8 564

    [7]

    Lau K C, Pati R, Pandey R, Pineda A C 2006 Chem. Phys. Lett. 418 549Google Scholar

    [8]

    Kunstmann J, Quandt A 2006 Phys. Rev. B 74 035413Google Scholar

    [9]

    Tang H, Ismail-Beigi S 2007 Phys. Rev. Lett. 99 115501Google Scholar

    [10]

    Yang X B, Ding Y, Ni J 2008 Phys. Rev. B 77 041402(R

    [11]

    Mannix A J, Zhou X F, Kiraly B, Wood J D, Alducin D, Myers B D, Liu X, Fisher B L, Santiago U, Guest J R, Yacaman M J, Ponce A, Oganov A R, Hersam M C, Guisinger N P 2015 Science 350 1513Google Scholar

    [12]

    Feng B J, Zhang J, Zhong Q, Li W B, Li S, Li H, Cheng P, Meng S, Chen L, Wu K H 2016 Nat. Chem. 8 563Google Scholar

    [13]

    李文辉, 陈岚, 吴克辉 2022 物理学报 71 108104

    Li W H, Chen L, Wu K H 2022 Acta Phys. Sin. 71 108104

    [14]

    Zhang Z H, Yang Y, Penev E S, Yakobson B I 2017 Adv. Funct. Mater. 27 1605059Google Scholar

    [15]

    Kong L J, Liu L R, Chen L, Zhong Q, Cheng P, Li H, Zhang Z H, Wu K H 2019 Nanoscale 11 15605Google Scholar

    [16]

    Zhong H X, Huang K X, Yu G D, Yuan S J 2018 Phys. Rev. B 98 054104Google Scholar

    [17]

    Peng B, Zhang H, Shao H, Xu Y, Zhang R, Zhu H 2016 J. Mater. Chem. C 4 3592Google Scholar

    [18]

    Mortazavi B, Rahaman O, Dianat A, Rabczuk T 2016 Phys. Chem. Chem. Phys. 18 27405Google Scholar

    [19]

    Wang Z, Lu T Y, Wang H Q, Feng Y P, Zheng J C 2016 Phys. Chem. Chem. Phys. 18 31424Google Scholar

    [20]

    Wang H F, Li Q F, Gao Y, Miao F, Zhou X F, Wan X G 2016 New J. Phys. 18 073016Google Scholar

    [21]

    Faghihnasiri M, Jafari H, Ramazani A, Shabani M, Estalaki S M, Larson R G 2019 J. Appl. Phys. 125 145107Google Scholar

    [22]

    Xiao R C, Shao D F, Lu W J, Lv H Y, Li J Y, Sun Y P 2016 Appl. Phys. Lett. 109 122604

    [23]

    Giannopoulos G I 2017 Comp. Mater. Sci. 129 304Google Scholar

    [24]

    Zhou Y P, Jiang J W 2017 Sci. Rep. 7 45516Google Scholar

    [25]

    Pham V T, Fang T H 2020 Thin Solid Films 709 138197Google Scholar

    [26]

    Pham V T, Fang T H 2021 Sci. Rep. 11 12123Google Scholar

    [27]

    Sha Z D, Pei Q X, Zhou K, Dong Z L, Zhang Y W 2018 Extreme Mech. Lett. 19 39Google Scholar

    [28]

    Ayodhya D, Veerabhadram G 2020 Flatchem 19 100150Google Scholar

    [29]

    Mannix A J, Zhang Z, Guisinger N P, Yakobson B I, Hersam M C 2018 Nat. Nanotechnol. 13 444Google Scholar

    [30]

    Kaneti Y V, Benu D P, Xu X, Yuliarto B, Yamauchi Y, Golberg D 2022 Chem. Rev. 122 1000Google Scholar

    [31]

    Rubab A, Baig N, Sher M, Sohail M 2020 Chem. Eng. J. 401 126109Google Scholar

    [32]

    Duo Y H, Xie Z J, Wang L D, Abbasi N M, Yang T Q, Li Z H, Hu G X, Zhang H 2021 Coordin. Chem. Rev. 427 213549Google Scholar

    [33]

    Hoover W G 1985 Phys. Rev. A Gen. Phys. 31 1695Google Scholar

    [34]

    Swope W C, Andersen H C, Berens P H, Wilson K R 1982 J. Chem. Phys. 76 637Google Scholar

    [35]

    Erhart P, Albe K 2005 Phys. Rev. B 71 035211Google Scholar

    [36]

    Vodenitcharova T, Zhang L C 2004 Phys. Rev. B 69 115410Google Scholar

    [37]

    Tran T B T, Fang T H, Nguyen V T, Pham V T 2021 Comp. Mater. Sci. 197 110624Google Scholar

    [38]

    Subramaniyan A K, Sun C T 2008 Int. J. Solids Struct. 45 4340Google Scholar

    [39]

    赵亚溥2014 纳米与介观力学(北京: 科学出版社) 第14页

    Zhao Y P 2014 Nano and Mesoscopic Mechanics (Beijing: Science Press) p14

    [40]

    Min K, Aluru N R 2011 Appl. Phys. Lett. 98 013113Google Scholar

    [41]

    Lee C, Wei X, Kysar J W, Hone J 2008 Science 321 385Google Scholar

    [42]

    Zhou L X, Wang Y G, Cao G X 2013 J. Phys. Condens. Matter 25 475303Google Scholar

    [43]

    Wang V, Geng W T 2017 J. Phys. Chem. C 121 10224Google Scholar

    [44]

    Peng B, Zhang H, Shao H Z, Ning Z Y, Xu Y F, Ni G, Lu H L, Zhang D W, Zhu H Y 2017 Mater. Res. Lett. 5 399Google Scholar

    [45]

    Cao G X, Gao H J 2019 Prog. Mater. Sci. 103 558Google Scholar

    [46]

    周立新, 曹国鑫 2018 力学进展 48 201804

    Zhou L X, Cao G X 2018 Adv. Mech. 48 201804

    [47]

    Bui T X, Fang T H, Lee C I 2021 Nanotechnology 32 165704Google Scholar

    [48]

    Han T W, Li R, Zhang X Y, Scarpa F 2023 Mech. Mater. 180 104628Google Scholar

    [49]

    Tan X J, Wu J, Zhang K W, Peng X Y, Sun L Z, Zhong J X 2013 Appl. Phys. Lett. 102 071908Google Scholar

    [50]

    Xiang L, Ma S Y, Wang F, Zhang K W 2015 J. Phys. D. Appl. Phys. 48 395305Google Scholar

  • 图 1  硼烯原子结构示意图以及分子动力学模拟模型 (a) 硼烯俯视图和侧视图; (b) 拉伸模型; (c) 剪切模型; (d) 球形压头纳米压痕模型; (e) 圆柱形压头纳米压痕模型

    Fig. 1.  Schematics of simulation models and atomic structures for borophene: (a) Top view and side view of borophene; (b) stretching model of borophene; (c) shearing model of borophene; (d) spherical indentation model of borophene; (e) cylindrical indentation model of borophene.

    图 2  硼烯在拉伸和剪切载荷下的力学响应规律 (a)拉伸应力-应变曲线; (b)剪切应力-剪切应变曲线; (c)强度和(d)弹性模量随温度的变化规律; (e) 强度和(f)弹性模量随应变率的变化规律

    Fig. 2.  Mechanicsl response of borophene under tensile and shear load: (a) Tensile stress-strain curves of borophene; (b) shear stress-strain curves of borophene; temperature-dependence of the (c) tensile/shear stress and (d) tensile Young’s modulus/shear modulus for borophene; (e) tensile/shear stress and (f) tensile Young’s modulus/shear modulus of borophene as a function of strain rate.

    图 3  硼烯在拉伸和剪切载荷作用下的变形过程和应力分布图 (a) 沿锯齿方向拉伸; (b)沿扶手椅方向拉伸; (c)沿锯齿方向剪切; (d)沿扶手椅方向剪切

    Fig. 3.  Deformation process and stress distribution of borophene under tensile and shear loads: (a) Tension along zigzag direction; (b) tension along armchair direction; (c) shear along zigzag direction; (d) shear along armchair direction.

    图 4  硼烯在不同载荷作用下的键长随应变/压入深度的变化规律 (a) 沿锯齿方向拉伸; (b)沿扶手椅方向拉伸; (c) 沿锯齿方向剪切; (d) 球形压头压痕实验; (e) 圆柱形压头沿扶手椅方向压痕; (f) 圆柱形压头沿锯齿方向压痕

    Fig. 4.  (a) Change of bond length of borophene with strain/indentation depth under different loads: (a) Tension along zigzag direction; (b) tension along armchair direction; (c) shear along zigzag direction; (d) indentation under spherical indenter; (e) indentation under cylindrical indenter along armchair direction; (f) indentation under cylindrical indenter along zigzag direction.

    图 5  硼烯的纳米压痕结果以及不同压痕参数的影响 (a)硼烯在不同压头下的载荷-位移曲线; (b)利用(3)式和(5)式分别对初始阶段的拟合曲线; (c) 杨氏模量与a/R的关系曲线; (d) 杨氏模量与a的关系曲线; (e) 杨氏模量与L/R的关系曲线; (f) 杨氏模量与W/L的关系曲线; (g) 杨氏模量与温度的关系曲线; (h)杨氏模量与加载速率的关系曲线

    Fig. 5.  Nanoindentation results of borophene and the influence of various indentation parameters: (a) Force-indentation depth curves for borophene under spherical and cylindrical indentation; (b) the fitting of the initial stage of the curves by Eq. (3) for spherical and Eq. (5) for cylindrical indentation; (c) Young’s modulus vs. a/R under spherical indentation; (d) Young’s modulus vs. a under spherical indentation with fixed a/R; (e) Young’s modulus vs. L/R under cylindrical indentation; (f) Young’s modulus vs. W/L under cylindrical indentation; (g) Young’s modulus vs. temperature; (h) Young’s modulus vs. loading rate.

    图 6  硼烯在不同压痕深度下的面内应力分布图 (a) 球形压头; (b) 圆柱形压头沿扶手椅方向压痕; (c) 圆柱形压头沿锯齿方向压痕

    Fig. 6.  In-plane stress distribution of borophene under: (a) Spherical indentation; (b) cylindrical indentation along armchair direction; (c) cylindrical indentation along zigzag direction at various indentation depths.

    表 1  硼烯的拉伸和剪切力学性能参数对比一览表

    Table 1.  Comparison of tensile and shear mechanical parameters of borophene with previous MD and DFT calculations.

    研究方法 $ {\varepsilon }_{x} $ $ {\varepsilon }_{y} $ $ {\sigma }_{x}/ $(N·m–1) $ {\sigma }_{y}/ $(N·m–1) $ {Y}_{x} $/(N·m–1) $ {Y}_{y} $/(N·m–1) $ G $/(N·m–1)
    MD(1 K)本文 0.15 0.08 15.53 24.07 158 379 76/77
    MD(300 K)本文 0.10 0.05 12.03 15.18 149 355 68/71
    DFT[11] 170 397 94
    DFT[14] 163 399
    MD[24] 1 K 0.15 0.10 12 24 163 394
    MD[24] 300 K 0.06 0.05 7 14 144 345
    MD[27] 300 K 0.102 0.087 11.2 26.8 150.8 357.9
    DFT[20] 0.15 0.08 12.98 20.26 166 389
    DFT[16] 158 397 86.5
    DFT[44] 154 382 76.4
    DFT[18] 0.145 0.105 14 22.8 163 382
    DFT[43] 162 377 84
    下载: 导出CSV

    表 2  硼烯在球形压头和圆柱形压头作用下的压痕力学参数

    Table 2.  Indentation mechanical parameters of borophene under spherical and cylindrical indenters.

    压头类型$ {\delta }_{{\mathrm{m}}{\mathrm{a}}{\mathrm{x}}} $/nm$ {P}_{{\mathrm{m}}{\mathrm{a}}{\mathrm{x}}} $/nN$ \sigma $/(N·m–1)Y/(N·m–1)
    球形压头4.546415.64193
    圆柱形压头(平行于扶手椅方向)13.6954612.65160
    圆柱形压头(平行于锯齿方向)3.8819125.34388
    下载: 导出CSV
  • [1]

    Novoselov K S, Geim A K, Morozov S V, Jiang D, Zhang Y, Dubonos S V, Grigorieva I V, Firsov A A 2004 Science 306 666Google Scholar

    [2]

    Bianco E, Butler S, Jiang S, Restrepo O D, Windl W, Goldberger J E 2013 ACS nano 7 4414Google Scholar

    [3]

    Vogt P, De Padova P, Quaresima C, Avila J, Frantzeskakis E, Asensio M C, Resta A, Ealet B, Le Lay G 2012 Phys. Rev. Lett. 108 155501Google Scholar

    [4]

    Bertolazzi S, Brivio J, Kis A 2011 ACS Nano 5 9703Google Scholar

    [5]

    Liu H, Neal A T, Zhu Z, Luo Z, Xu X, Tománek D, Ye P D 2014 ACS nano 8 4033Google Scholar

    [6]

    Feng B J, Zhang J, Zhong Q, Li W B, Li S, Li H, Cheng P, Meng S, Chen L, Wu K H 2016 Nat. Chem. 8 564

    [7]

    Lau K C, Pati R, Pandey R, Pineda A C 2006 Chem. Phys. Lett. 418 549Google Scholar

    [8]

    Kunstmann J, Quandt A 2006 Phys. Rev. B 74 035413Google Scholar

    [9]

    Tang H, Ismail-Beigi S 2007 Phys. Rev. Lett. 99 115501Google Scholar

    [10]

    Yang X B, Ding Y, Ni J 2008 Phys. Rev. B 77 041402(R

    [11]

    Mannix A J, Zhou X F, Kiraly B, Wood J D, Alducin D, Myers B D, Liu X, Fisher B L, Santiago U, Guest J R, Yacaman M J, Ponce A, Oganov A R, Hersam M C, Guisinger N P 2015 Science 350 1513Google Scholar

    [12]

    Feng B J, Zhang J, Zhong Q, Li W B, Li S, Li H, Cheng P, Meng S, Chen L, Wu K H 2016 Nat. Chem. 8 563Google Scholar

    [13]

    李文辉, 陈岚, 吴克辉 2022 物理学报 71 108104

    Li W H, Chen L, Wu K H 2022 Acta Phys. Sin. 71 108104

    [14]

    Zhang Z H, Yang Y, Penev E S, Yakobson B I 2017 Adv. Funct. Mater. 27 1605059Google Scholar

    [15]

    Kong L J, Liu L R, Chen L, Zhong Q, Cheng P, Li H, Zhang Z H, Wu K H 2019 Nanoscale 11 15605Google Scholar

    [16]

    Zhong H X, Huang K X, Yu G D, Yuan S J 2018 Phys. Rev. B 98 054104Google Scholar

    [17]

    Peng B, Zhang H, Shao H, Xu Y, Zhang R, Zhu H 2016 J. Mater. Chem. C 4 3592Google Scholar

    [18]

    Mortazavi B, Rahaman O, Dianat A, Rabczuk T 2016 Phys. Chem. Chem. Phys. 18 27405Google Scholar

    [19]

    Wang Z, Lu T Y, Wang H Q, Feng Y P, Zheng J C 2016 Phys. Chem. Chem. Phys. 18 31424Google Scholar

    [20]

    Wang H F, Li Q F, Gao Y, Miao F, Zhou X F, Wan X G 2016 New J. Phys. 18 073016Google Scholar

    [21]

    Faghihnasiri M, Jafari H, Ramazani A, Shabani M, Estalaki S M, Larson R G 2019 J. Appl. Phys. 125 145107Google Scholar

    [22]

    Xiao R C, Shao D F, Lu W J, Lv H Y, Li J Y, Sun Y P 2016 Appl. Phys. Lett. 109 122604

    [23]

    Giannopoulos G I 2017 Comp. Mater. Sci. 129 304Google Scholar

    [24]

    Zhou Y P, Jiang J W 2017 Sci. Rep. 7 45516Google Scholar

    [25]

    Pham V T, Fang T H 2020 Thin Solid Films 709 138197Google Scholar

    [26]

    Pham V T, Fang T H 2021 Sci. Rep. 11 12123Google Scholar

    [27]

    Sha Z D, Pei Q X, Zhou K, Dong Z L, Zhang Y W 2018 Extreme Mech. Lett. 19 39Google Scholar

    [28]

    Ayodhya D, Veerabhadram G 2020 Flatchem 19 100150Google Scholar

    [29]

    Mannix A J, Zhang Z, Guisinger N P, Yakobson B I, Hersam M C 2018 Nat. Nanotechnol. 13 444Google Scholar

    [30]

    Kaneti Y V, Benu D P, Xu X, Yuliarto B, Yamauchi Y, Golberg D 2022 Chem. Rev. 122 1000Google Scholar

    [31]

    Rubab A, Baig N, Sher M, Sohail M 2020 Chem. Eng. J. 401 126109Google Scholar

    [32]

    Duo Y H, Xie Z J, Wang L D, Abbasi N M, Yang T Q, Li Z H, Hu G X, Zhang H 2021 Coordin. Chem. Rev. 427 213549Google Scholar

    [33]

    Hoover W G 1985 Phys. Rev. A Gen. Phys. 31 1695Google Scholar

    [34]

    Swope W C, Andersen H C, Berens P H, Wilson K R 1982 J. Chem. Phys. 76 637Google Scholar

    [35]

    Erhart P, Albe K 2005 Phys. Rev. B 71 035211Google Scholar

    [36]

    Vodenitcharova T, Zhang L C 2004 Phys. Rev. B 69 115410Google Scholar

    [37]

    Tran T B T, Fang T H, Nguyen V T, Pham V T 2021 Comp. Mater. Sci. 197 110624Google Scholar

    [38]

    Subramaniyan A K, Sun C T 2008 Int. J. Solids Struct. 45 4340Google Scholar

    [39]

    赵亚溥2014 纳米与介观力学(北京: 科学出版社) 第14页

    Zhao Y P 2014 Nano and Mesoscopic Mechanics (Beijing: Science Press) p14

    [40]

    Min K, Aluru N R 2011 Appl. Phys. Lett. 98 013113Google Scholar

    [41]

    Lee C, Wei X, Kysar J W, Hone J 2008 Science 321 385Google Scholar

    [42]

    Zhou L X, Wang Y G, Cao G X 2013 J. Phys. Condens. Matter 25 475303Google Scholar

    [43]

    Wang V, Geng W T 2017 J. Phys. Chem. C 121 10224Google Scholar

    [44]

    Peng B, Zhang H, Shao H Z, Ning Z Y, Xu Y F, Ni G, Lu H L, Zhang D W, Zhu H Y 2017 Mater. Res. Lett. 5 399Google Scholar

    [45]

    Cao G X, Gao H J 2019 Prog. Mater. Sci. 103 558Google Scholar

    [46]

    周立新, 曹国鑫 2018 力学进展 48 201804

    Zhou L X, Cao G X 2018 Adv. Mech. 48 201804

    [47]

    Bui T X, Fang T H, Lee C I 2021 Nanotechnology 32 165704Google Scholar

    [48]

    Han T W, Li R, Zhang X Y, Scarpa F 2023 Mech. Mater. 180 104628Google Scholar

    [49]

    Tan X J, Wu J, Zhang K W, Peng X Y, Sun L Z, Zhong J X 2013 Appl. Phys. Lett. 102 071908Google Scholar

    [50]

    Xiang L, Ma S Y, Wang F, Zhang K W 2015 J. Phys. D. Appl. Phys. 48 395305Google Scholar

  • [1] 陈晶晶, 赵洪坡, 王葵, 占慧敏, 罗泽宇. SiC基底覆多层石墨烯力学强化性能分子动力学模拟. 物理学报, 2024, 73(10): 109601. doi: 10.7498/aps.73.20232031
    [2] 胡庭赫, 李直昊, 张千帆. 元素掺杂对储氢容器用高强钢性能影响的第一性原理和分子动力学模拟. 物理学报, 2024, 73(6): 067101. doi: 10.7498/aps.73.20231735
    [3] 明知非, 宋海洋, 安敏荣. 基于分子动力学模拟的石墨烯镁基复合材料力学行为. 物理学报, 2022, 71(8): 086201. doi: 10.7498/aps.71.20211753
    [4] 辛勇, 包宏伟, 孙志鹏, 张吉斌, 刘仕超, 郭子萱, 王浩煜, 马飞, 李垣明. U1–xThxO2混合燃料力学性能的分子动力学模拟. 物理学报, 2021, 70(12): 122801. doi: 10.7498/aps.70.20202239
    [5] 韩同伟, 李仁, 操淑敏, 张小燕. 官能化对五边形石墨烯力学性能的影响及机理研究. 物理学报, 2021, 70(22): 226201. doi: 10.7498/aps.70.20210764
    [6] 白清顺, 窦昱昊, 何欣, 张爱民, 郭永博. 基于分子动力学模拟的铜晶面石墨烯沉积生长机理. 物理学报, 2020, 69(22): 226102. doi: 10.7498/aps.69.20200781
    [7] 李兴欣, 李四平. 退火温度调控多层折叠石墨烯力学性能的分子动力学模拟. 物理学报, 2020, 69(19): 196102. doi: 10.7498/aps.69.20200836
    [8] 邵宇飞, 孟凡顺, 李久会, 赵星. 分子动力学模拟研究孪晶界对单层二硫化钼拉伸行为的影响. 物理学报, 2019, 68(21): 216201. doi: 10.7498/aps.68.20182125
    [9] 张忠强, 李冲, 刘汉伦, 葛道晗, 程广贵, 丁建宁. 石墨烯碳纳米管复合结构渗透特性的分子动力学研究. 物理学报, 2018, 67(5): 056102. doi: 10.7498/aps.67.20172424
    [10] 李杰杰, 鲁斌斌, 线跃辉, 胡国明, 夏热. 纳米多孔银力学性能表征分子动力学模拟. 物理学报, 2018, 67(5): 056101. doi: 10.7498/aps.67.20172193
    [11] 李明林, 万亚玲, 胡建玥, 王卫东. 单层二硫化钼力学性能温度和手性效应的分子动力学模拟. 物理学报, 2016, 65(17): 176201. doi: 10.7498/aps.65.176201
    [12] 闻鹏, 陶钢, 任保祥, 裴政. 纳米多晶铜的超塑性变形机理的分子动力学探讨. 物理学报, 2015, 64(12): 126201. doi: 10.7498/aps.64.126201
    [13] 惠治鑫, 贺鹏飞, 戴瑛, 吴艾辉. 硅功能化石墨烯热导率的分子动力学模拟. 物理学报, 2014, 63(7): 074401. doi: 10.7498/aps.63.074401
    [14] 袁林, 敬鹏, 刘艳华, 徐振海, 单德彬, 郭斌. 多晶银纳米线拉伸变形的分子动力学模拟研究. 物理学报, 2014, 63(1): 016201. doi: 10.7498/aps.63.016201
    [15] 常旭. 多层石墨烯的表面起伏的分子动力学模拟. 物理学报, 2014, 63(8): 086102. doi: 10.7498/aps.63.086102
    [16] 苏锦芳, 宋海洋, 安敏荣. 金纳米管力学性能的分子动力学模拟. 物理学报, 2013, 62(6): 063103. doi: 10.7498/aps.62.063103
    [17] 喻利花, 马冰洋, 曹峻, 许俊华. (Zr,V)N复合膜的结构、力学性能及摩擦性能研究. 物理学报, 2013, 62(7): 076202. doi: 10.7498/aps.62.076202
    [18] 马彬, 饶秋华, 贺跃辉, 王世良. 单晶钨纳米线拉伸变形机理的分子动力学研究. 物理学报, 2013, 62(17): 176103. doi: 10.7498/aps.62.176103
    [19] 顾芳, 张加宏, 杨丽娟, 顾斌. 应变石墨烯纳米带谐振特性的分子动力学研究. 物理学报, 2011, 60(5): 056103. doi: 10.7498/aps.60.056103
    [20] 徐 洲, 王秀喜, 梁海弋, 吴恒安. 纳米单晶与多晶铜薄膜力学行为的数值模拟研究. 物理学报, 2004, 53(11): 3637-3643. doi: 10.7498/aps.53.3637
计量
  • 文章访问数:  1589
  • PDF下载量:  43
  • 被引次数: 0
出版历程
  • 收稿日期:  2024-01-10
  • 修回日期:  2024-03-03
  • 上网日期:  2024-04-07
  • 刊出日期:  2024-06-05

/

返回文章
返回